The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
I am threatening to build my workbench again. For the top, I have an opportunity to get a one piece slab cut from a huge Live Oak log that's about a year old. I wanted my top to be 30x60. It looks like this will be about 28x55 which is ok. What I'm wondering is if we cut a 3 or 4 or 5 inch slab from the middle of the log, what problems am I looking at? Live Oak is beautiful wood and would make a rock hard top but I'm thinking about cupping and having enough skills to hand plane it to flatness. What say ye? Thanks Tim
-
-
- 24 replies
- 8.5k views
-
-
I cut this from a neighbors yard, but we could not id the tree. The wood is very soft. Any thoughts?
-
-
- 26 replies
- 5.8k views
-
-
-
-
- 15 replies
- 3.1k views
- 1 follower
-
-
I just spoke with my hardwood dealer to price out some Poplar. 2.44 BF for "Prime" I have not heard this grade given to a hardwood before and it doesn't seem to be listed as an official grade under the NHLA grading criteria. Any insight would be appreciated.
-
-
- 16 replies
- 5.5k views
-
-
Hey guys I came across some old pine boards yesterday and was looking for some advice on where to start with the process. I want to try to make some tables with them I've never started with stuff this rough also do I have to treat the boards?? Any info is appreciated. Sent from my iPhone using Tapatalk
-
-
- 11 replies
- 3.3k views
-
-
Hello WTO'er, I am working on a way to properly store sheet good vertically. My question is will the sheet good bend or bow if not pressed to keep straight?
-
-
- 13 replies
- 13.6k views
-
-
-
I am reading a book called Wood Identification and Use by Terry Porter that I checked out from the library. It is a pretty cool book and has interesting and useful information on many woods including known health risks. I first read about the woods I commonly use to see what it says about their health risks. Black Walnut - irritation to eyes and skin. Sugar Maple - dust can affect lung function. American ash - decrease in lung function, rhinitis, asthma. Black Cherry - wheezing and giddiness. Say what? Giddiness??! So if we want to get in a good mood we should work with cherry? I told my husband this and he says he is going to run out and buy some cherry …
-
-
- 1 reply
- 2.7k views
-
-
Hi everyone! A friend of mine just made these buttons and doesn't know the type of wood they are. This is what she told me: "During a recent ice storm, some limbs snapped off the tree in my neighbor’s yard and I really liked the look of the center of the limb so I snatched it (I probably looked really ridiculous lol). It has smooth-ish silvery bark, but obviously no leaves yet because its winter." She lives in Kentucky if that helps. I have no idea if you can even tell from a sample taken from a tiny branch, but just in case... Thanks!
-
- 12 replies
- 3.6k views
-
-
I have two projects ahead - planning to use birch or maple. Looking at several lumberyards within 100 miles, I find drastically different pricing for similar grade of wood. What should I look for or questions to ask regarding selecting the best value/quality mix of lumber? Thanks for any suggestions!!
-
-
- 5 replies
- 3.6k views
-
-
I picked these pieces up from a friend who is claims to be a "woodworker" but is more like a wood hoarder. I wet the pieces with water to show some of the figure. Spunjinworks.wordpress.com
-
- 8 replies
- 2.5k views
-
-
A quick question, Do any of you use the change in wood grain or color in your project. I did and my wife does not think it looks that good. The picture is the start of a backgammon board, and I specifically wanted the changes in color.
-
-
- 13 replies
- 3k views
-
-
in cost and funtion? It's not readily available in my area. thanks.
-
- 8 replies
- 5.1k views
-
-
100 years old. Came over on a boat from Ireland. Chopped down from a tall hall table to a short coffe one by my grandmother. I believe it was refinished at that time. Some severe finish damage led me to strip. The figure was obvious after stripping so I am working to bare wood for a new take on the finish. Fairly light, it works beautifully with hand tools. It is not a specie I am familiar with. The dark blotching is just water.
-
-
- 34 replies
- 7.6k views
- 1 follower
-
-
My husband and I picked up an old sewing cabinet from the side of the road a few months ago. It had clearly been neglected for quite a while—the top was badly warped and the amount of dirt was ridiculous. I've been (slowly) cleaning it up, removing the layers upon layers of gunk and the discolored finish to reveal the beautiful carved wood underneath. I've only cleaned up one door so far, but I'm curious about what kind of wood this is and am hoping someone here can help me out.
-
-
- 5 replies
- 2.8k views
-
-
I was building a fire out in the shop yesterday I grabbed a chunk of alder I was looking at it and, it looked like it would be an interesting piece of wood. I squared it up on the old band saw and, it yielded a 4x4" 20" long I spent some time working on some cabinets that I'm building and thinking about what I wanted to do with the found wood. this is what I came up with you can't see the spalting that shows up with the naked eye but, the variegation of the reds and, yellows show real well. I just thought someone might enjoy the woodpile find my photography skills are probably lacking.
-
-
- 10 replies
- 3k views
-
-
Driving home from work today I see a large pile of oak tree trimmings lining the road by one of the buildings I pass. I stop and ask if I can take some and the guy said, "all if you want as its sitting out for the trash!" Now granted there are only a few pieces wide enough to eek out a board, and leaving aside the arguments against working with urban wood, my question is about pests. Aside from visual inspection of the wood itself, is there anything else I can do? Should I bag up the wood and leave it sit airtight for awhile, leave the bag in a car trunk and let it get hot, etc. I have no access to a kiln and no space to build one (nor would the city allow me! LOL) The on…
-
-
- 26 replies
- 6.2k views
-
-
I have seen some of the lumber yards some of you guys get to go to. I am always jealous too! But I got ahold of this single piece of cherry that was 13 in wide and 16 ft long. As jealous as I am of the lumber yards you all go to, I get cherry, walnut, poplar, and maple CHEAP. My mom does accounting for a wholesale lumberyard and I get it at cost. The only problem is, I don't get to see or pick pieces. I can just give my mom measurements and she orders it. This piece costs me a whooping ZERO dollars. It was a Bday gift from my mom. One that I will gladly accept I am using it for a TV stand that I am making. I put down some mineral spirits to make sure my glu…
-
-
- 7 replies
- 3.1k views
-
-
I have a few sheets of warped 3/4 Birch ply laying around and was wondering if they were worth anything more that firewood. I've been considering installing a French Cleat system for wall storage and was wondering how to safely cut these sheets on my table saw. Any ideas anyone?
-
-
- 12 replies
- 3.2k views
-
-
I'm so used to poplar being that mostly ugly greenish-white crap that you get at big box stores. I wanted to buy some inexpensive wood to make shop projects out of, including the hand tool school semester 1 projects, and I decided to cheap out and get #1 common poplar from my local yard at a buck forty a boardfoot. It's very colorful stuff, and roughsawn. I cut off a gnarly end and planed it down to get a look at it, and I was quite surprised! An even gnarlier chunk that came off the edge of this piece had some amazing wonders buried within: Just screwing around in the shop demonstrating sawing and planing to some friends, and it was fun to u…
-
-
- 6 replies
- 3.5k views
-
-
I'm going to start building a new workbench soon. I was going to build it out of 2" x 6" construction pine, with laminated 2" x 4" legs. The chances are the lumber has been sat out in sub zero temperatures for a while, and my shop won't be a whole lot different seeing as I only heat it when I'm working in there. I only get to woodwork one day a week, so the wood will only be room temperature for one day a week anyway. My question is: Do I need to let it acclimate to my workshop, seeing as any water in the wood is probably frozen in the -15C (approximate 0F) temperatures we have here in Nova Scotia at this time of year? If I do, how long for?
-
-
- 18 replies
- 5.9k views
-
-
Decided to make Gregory Paolini's arts and crafts inspired coffee table as my first hardwood furniture project. There is a nice video series that goes with the plans, so feel pretty good about my chances of success. First opportunity for experience will be buying rough sawn lumber, in this case QS white oak, $5 a bf at the local sawmill I plan to go to. Website lists quality as select/fas. The plans say 16bf, but that sounds really light to me, maybe that is the bf for the milled finished cut list. My calculations I think over estimate, perhaps more than necessary, I wanted to get your thoughts. The list below is the cultist followed by my bf calc: Top: 1@3/4x2…
-
-
- 17 replies
- 3.8k views
-
-
I'm considering making new slab front drawers and doors for the kitchen and was looking at butternut. I know the wood itself is quite soft but would I be correct in assuming that using a veneer over plywood would eliminate most of the issues with dings and dents?
-
- 6 replies
- 2.8k views
-
-
One of the projects I want to make for myself is a spice rack so I don't have random bottles and packages floating near the one that currently exists on my counter. I don't want to spend too much money on wood for what is going to be a kitchen fixture, but the cheapest options (pine and poplar) are hard to finish, yet don't have a natural look I'm too fond of. Home center maple isn't too expensive, but I understand it dulls tools like no tomorrow. I noticed that the local hardwood dealer has a special on walnut shorts this month, which leads me to ask two questions: 1-How easy is walnut to work with handtools? 2-Is there a good reference to look up the working/finishin…
-
- 2 replies
- 2.2k views
-
-
I need some help trying to ID a tree. Tree is located in NJ and is old based on size. The trunk is over 2ft in diameter at the base. If I remember correctly from summertime, the leaves are similar to an ash or hickory. It blossoms with small white petals annually.
-
-
- 14 replies
- 4.2k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·