The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
Dear All, Do you have these products in the US? If so who stocks them? If someone does stock them can you get them 32mm thick?
-
- 10 replies
- 3.4k views
-
-
I was looking through the sheet goods section of my local supplier, and they have listed exterior MDF. Anyone hear of this before? Hw is its performance?
-
-
- 5 replies
- 3.3k views
-
-
I need to make a small stool that will live in our shower. Any suggestions on what to use? I was thinking Teak or Cypress?
-
-
- 9 replies
- 3k views
-
-
I have some tall oak trees that fell last year after a lot of rain and then high winds. Is there a market for these? And if there is does anyone know how I can contact whoever may purchase them?
-
-
- 7 replies
- 11.4k views
-
-
Something about milling my own lumber just makes me happy. Is that weird?
-
-
- 9 replies
- 3.1k views
-
-
Greetings, I am building my little ones a new swing set and I am stoked. I designed it on SketchUp and already put in some sonotube/post bases. Now to buy the wood. 1.) Should I go with Treated or Untreated and why? I thought it was a no-brainer, but I have heard pluses and minuses for both. I will be using high quality stain, however my sprinklers will hit this thing about 3 times a week (along with any rain). 2.) Should I use a wholesaler (Lowes/Home Depot) or a lumber yard? Any other comments would be appreciated as well. Thanks for your help! -Fritz
-
- 9 replies
- 30.9k views
-
-
Where do you get most of you wood from Lumbar Yard Hardwood Dealer Big Box Store (Menards, Lowes, Etc) Why do you get your wood from that source?
-
-
- 23 replies
- 7.4k views
-
-
I have a lot of russian olive trees to cut in the next few months. anyone interseted in buying the wood for custom work? i have seen some beautiful work done with this wood.
-
- 2 replies
- 7.9k views
-
-
I am looking to make a bathroom vanity out of walnut, but I am having a heck of a time finding a source for plywood in Pittsburgh. I seen that you could order hardwood plywood from H.D. but I am wondering what the quality of it may be. Has anyone used it? Or is there a source online that I could order from and have it delivered, without the delivery costing more than the plywood itself?
-
- 19 replies
- 6.4k views
-
-
a cigar press. This is a first for me; and he really cant describe it very well. I have done some googling and it appears it makes a cylindrical cigar square shaped. Ok... My thought to you all is what wood might be best for this? At first I was thinking cedar, but if he going to be stressing it with wing-nuts (his suggestion) then that just wouldn't be realistic and cedar loves to crack with point stress induced. Ideas?
-
- 4 replies
- 2.8k views
-
-
Using curly maple for the first time. When I joint the edges, I'm getting a ton of tearout. I'm relatively new at woodworking and wanted to know if this is normal? It doesn't seem to matter which way I run the boards. The grain on the ends runs almost horizontal (flat sawn?) Should I be using hand planes to joint the edges maybe? The Blades of my jointer are almost new so I don't think that they are the culprit. I am only taking about 1/64th at a time. Don't notice much when I plane one side flat, just when I joint the edges. Thanks
-
-
- 19 replies
- 5.2k views
-
-
i made a trip to see a guy selling some kiln dried walnut yesterday and was very pleasantly suprised by the selection. Just about all of the 4/4 stuff I bought was nice and clear. The guy and his son even helped me pick through the stacks and encouraged me to take all the time I wanted to find the right stuff. I also bought one big old hunk of 8/4. I don't know what it is about this board but it kind of jumped out at me and I really wanted it despite having a couple of knots in it. Originally I just wanted a little bit of 8/4 for some shaker table legs but this monster came in at 14BF. Being a complete novice, I don't know how to deal with the knots in this. They …
-
-
- 3 replies
- 2.8k views
-
-
Howdy all. Great forum here. I've recently dropped a big western maple and I'm planning to have it milled later this summer. My goal is to use the lumber for kitchen cabinets in my house. I've milled maple before, mostly to make my flooring and I know how much it likes to move around, especially the figure wood. After my last mill run, I had a number of boards that came out of the kiln at >1" thickness and by the time I got 'em flat they were down around 5/8" to 3/4". This time I'm thinking that I should have everything come off of the mill around 5/4 to (hopefully) net 7/8. I'm also not sure about the legnth to cut the logs. Last time I was about 10' and that seem…
-
-
- 4 replies
- 4.8k views
-
-
Great show WoodTalk guys!! Keep up the great work. I am curious what your favorite online source is for wood that you cannot source locally? I am skeptical of online places because I really prefer to be able to see, touch, and feel the boards I am purchasing. However, for my next project, that just is not going to be an option. Shannon, probably no need to chime in as you have your own personal lumber yard to pick from! . Just kidding...I value all of your opinions... Thanks in advance! Eric D
-
-
- 14 replies
- 3.7k views
-
-
I recently cut a chunk of maple off a stump which has spalted and has great patterns..now I'm hooked. Where would you look for spalted wood?
-
-
- 14 replies
- 3.8k views
-
-
ok so not realy but i have noticed a few woods smell like food for example i just discovered today that IPE smells a little like teriyaki jerky and lilack wood smells like a pumpkins when you cut it open at haloween. has anyone made a similar discovery over the years if so what wood and what food? decided to make a list of all the woods that people say smell like something even if its not food oak- can smell like teenager gym socks padauk-perfume mozambique-dog poo Ipe-ameretto liqueur wenge-chocolate cherry- cinimon imbula-pencil shavings iroko-pepper spray/musterd gas cocobolo-super sweet jatoba-burnt popcorn brazillian tulip-citrus lilack-pumpkin m…
-
-
- 34 replies
- 8.1k views
-
-
My wife wants my 3rd project to be a mailbox that looks like a steamer trunk. Ok, no prob, just scale down a steamer trunk plan and make one end the door for the mail. No biggie, right? So what wood would you guys use if you were building a mini steamer trunk mailbox that will be exposed to the heat and humidity of Alabama summers and the wet and cool of Alabama winters (we generally skip spring and fall as a general rule)?
-
- 8 replies
- 3k views
-
-
I have a source for 130 BF of 8/4 African Mahogany at 13' long and ranges from 3.25"-7.5" wide. I wanted to know if it was a good deal. I know it is a bit narrow but I can laminate them to get the panels I need. I plan on making a table and chairs for for my family of 6. I can get 8/4 Genuine Mahogany for $9.41/bf but don't know what the price for 8/4 African Mahogany runs. Thoughts? Sent from my iPhone using Tapatalk
-
-
- 6 replies
- 3.5k views
-
-
I'm excited about a shipment of turning blanks I just received from Got Wood? http://www.turningbl...vlet/StoreFront I'm a novice turner so I selected a variety of different spindle blanks and bowl blanks to practice on and to see which woods I like. Here is a picture of my wood. I like it that the bowl blanks are already cut round. What other commercial sources do you turners use for turning blanks? BTW, Got Wood has great service. My wood was shipped the same day as my order, it arrived in perfect condition and the wood looks great! Cindy
-
-
- 30 replies
- 13k views
-
-
Dang that stuff is expensive. only menards caries it in my area and it is $54.99. And actually the quality is pretty good how does this compare?
-
- 2 replies
- 2.6k views
-
-
My outdoor table is done, and I need to build new one. I was considering using composite lumber for the build. Has anyone tried this? The fact of it being maintenance free is a big plus! Also, there is no finish involved so the build is relatively quick. My guess is joinery will need to mechanical. Is there other methods or adhesive available? Ideas? Opinions?
-
-
- 19 replies
- 3.3k views
-
-
Ok, I have a client with an Old butcher block 40x 30 about 12' tall. It has been in the basement of their building for years and years. The problem I have is it was laying on the dirt, so I has some surface rot which is no big deal because I have to cut it all down to make it all flat again. But the problem is the smell of what I believe to be fuel oil, I can only assume there was an oil burning furnace there at one time and someone sat a can or spilled some on this block. I've never had this problem so I'm looking for any advice? We took the block is completely apart, but I'm not sure if I let it air out will that smell ever go away. Or anyone got any Ideas on how to …
-
-
- 12 replies
- 6.4k views
-
-
So I have a few projects drawn up and I would like to incorporate some veneer patterns. My question to everybody is how to attach them? I have read that some folks use white glue and lots of weight/ clamps. Other swear by home made vacuum bags and special veneer glue In some books, I have seen hide glue and a veneer hammer for smaller components such as drawer boxes. If i were to apply maple or walnut veneer to say a 24" x 24" table top, what would be choice method?
-
-
- 21 replies
- 8.7k views
-
-
Need some advise, in looking for some 8/4 Maple to make a Butcher style Table Top for I found a local sawmill. The owner said he did not have any 8/4 already cut, but he has some "Air Dried" logs that he would rough cut my stock to my specifications. I have always gotten Kiln Dried Lumber already rough cut for all my other projects. Guys tell me what I need to know. His price is really attractive that I want to consider it. Will I have to let it sit in my shop for a while before I can mill it a build the top? If so how long? Tell me what I don't know. Thanks Guys
-
- 6 replies
- 2.9k views
-
-
I'm starting to think about building a dining table using hard maple. I think the finish will be teak or Danish oil. I want something easy to repair, as I have 4 kids with the destructive potential of a Navy SEAL team. The table will be rectangular with mortise and tenon joints, and will seat at least 6, maybe 8. The boards will run the width of the table rather than the length. I'm not sure how to do the edges yet, but I guess they'll be breadboard--any suggestions? Anything to watch out for or other suggestions?
-
-
- 10 replies
- 3.8k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·