The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
I have wondered for quite a while about wood movement in our modern heated and cooled homes; where the humidity level remains fairly constant. I lived for a long time in SW Missouri, and have lived in Central Oklahoma for the past 21 years. We normally have gone from heating to AC and back, rarely opening the windows because of all of the wind and dust there and here in OKC. Is wood movement minimized over the long term in temperature/humidity controlled environments? I think that it must be. I built a G & G entertainment center ( my apologies to Darryl Peart) with quarter sawn white oak 3 years ago, and the top is 20 x 72, edge joined 5/4 +/- with breadboard en…
-
- 2 replies
- 2.7k views
-
-
hello, my friends, I'm new at woodworking but I've built two hallway cabinets with a space between them and over the bottom cabinet, I've installed a granite counter, the cabinet is white and the granite is black and I need to make some doors, my wife wants white doors, which i agree with but we're not sure if we want to go with a solid white panel or frosted glass type of panel, anyway, since I am going to paint the door (stiles and rails) and perhaps the panel, I need help on figuring out what type of wood to use for the stiles and rails and also for the panel, also if anyone knows of a way to paint them so that they look great,please let em know. Thank you!!! Luis
-
- 8 replies
- 3.3k views
-
-
Is there a technical reason why people avoid sapwood? Is it oily, moist, or otherwise difficult to cut or finish? Or is it just about aesthetics? I think the opposing colors could work well, especially in a darker wood like walnut, and discarding the sapwood for aesthetics alone seems like such a waste.
-
-
- 8 replies
- 6.5k views
-
-
Well I made the trip out to see the saw mill I have been using and as usual come home with wood but no money in my wallet. I got two sycamore board that are 24'' across and about 12' long 8/4. Not sure what to do with the sycamore has anybody had any experience with it. The guy told me it is spalted and i cleaned a small area up on it but didn't see any spalting. Also could not resist the walnut slabs the one larger one I purchased its mate about 6 months ago. The smaller ones not sure what i will do with them but I bought them for $4 apiece!! And the grande finally was the dark deep red cherry board. You might notice the burned outer edge. Last time I was there t…
-
- 1 reply
- 2.5k views
-
-
Once upon a time, a cherry tree in my back yard lost half of a pretty big tree limb. Turned out, one of its branches broke off, some water got in, and a pretty big section of it rotted out. Fortunately, when we cut the other half down, we were able to save a couple nice pieces... maybe 10" in diameter and between 12 and 18" long, so really, enough for, say, a couple really chunky coffee table legs. As I understand it, it's at least 1 year per inch of thickness to air-dry wood, so I'm looking at... what, a decade for these to dry out? Short of finding a lumber yard willing to let me toss these in their kiln, do I have any other options? I've already got some checking on…
-
- 7 replies
- 4.6k views
-
-
I am new to woodworking, and I am curious about wood movement. I haven't found a topic in the forum dedicated to wood movement (although it is entirley possible I missed it), so I thought I'd start one so myself and others can learn about it. I'm curious if all kinds of wood, from the basic common woods to exotic woods, warp, expand, and contract with weather changes and what other factors cause wood movement?? Also, when does the movement of wood affect how one joins together a wood project?? My small experience: I bought some pine wood, stored it in my garage for a few days, and when I came out to use it I sadly found that it had warped, so the 30 minutes I s…
-
- 13 replies
- 4k views
-
-
Check out the text I just got from my lumber supplier! If anyone is looking for some excellent curley cherry in Northeast Pennsylvania, let me know.
-
- 1 reply
- 2.4k views
-
-
So last Fall my Dad decided to take down a massive red oak next to his house (this thing was big when I was a kid; 40 year ago). It was a double trunk with the main base measuring a little over 4' across and split into 2 main trunks each measuring 16" - 20". I cut them to 9' lengths and stored the 5 sections off the ground for the past year (now was the earliest I could get around to having them milled up). Well, today was finally that day! Luckily, I was able to find an experienced sawyer that after talking with him and a couple of his clients I felt good about having him slice these bad boys up. Had the 3 best sections quartersawn 8/4 and the remaining 2 section…
-
- 4 replies
- 2.8k views
-
-
Thought i would ask if anyone has experience with antique barn wood. I have inherited and am taking down a barn that is well over 100 years with the beams intact. I have read alot about what to do from there. I am looking for any advice on treatment, and finishing of beams for indoor use. Thanks in advance
-
- 4 replies
- 3.1k views
-
-
I have A LOT of 4/4 rough sawn red oak (about 1,000 BF or more) since it was handed down to me. I have a board that is about 10-11 feet long and 16 inches wide. I could do the BF calculation, but I don't know how many boards I find that are this wide. That's why I ask for an opinion.
-
- 2 replies
- 2.7k views
-
-
I saw this over on the router forum site and had to share it with y'all. This guy uses wood shavings from a Russian Red Cedar and soaks them for days in water. When the are ready, he makes stuff like these pics below.
-
- 8 replies
- 3.3k views
-
-
Im going to be building an island with a butcher block top and wanted to know which maple would be better. Both the top and cabinet would be the same wood. I know butcher blocks are typically hard maple, but i just wanted to get some other opinions. Thanks, Joe
-
-
- 13 replies
- 3.6k views
-
-
Is there any wood that is preferable from an ease of use and price stand point to begin working with? I'm waiting on some books to come in that i'm sure go into some characteristics of wood and how to pick some out, but i'd like to get some input ahead of time so i pay particular attention to specific species while i'm reading
-
-
- 32 replies
- 8.6k views
-
-
My next large project (starting in a few weeks) is going to be a sizable desk. I primarily work from home and the pressboard piece of crap I got from Staples many years ago needs to get tossed in the fire pit. I will draw up the plans myself, but I am going for an "executive style desk with an arts and crafts feel" if that makes any sense. Typically I would use QSWO. I have some concerns though: 1 - Since the top is going to be fairly substantial (3 1/2 feet deep by about 7 feet long) I would prefer it be plywood with an MDF underlay. Also I would like to picture frame it with a contrasting wood which I would never consider with solid hardwood. Also I have never been a…
-
-
- 17 replies
- 18.4k views
-
-
i know this is a wood working forum but im looking for a good source of soap stone for turning on my lathe. eather a quary in illinois or the state's surounding it. or a web page that i can buy blocks and chips of it for a farly resonable price. i figure if hoby loby is selling a small block of it for 10 dollers i can buy it in biger sizes for a much lesser price (per pound) strait from a dealer or a quary. second im looking for inlay material if you carve bone or stones then perhaps we can make a trade or a sale because im looking for the chips and dust that usualy get thrown away. for example i know some people carve mamoth bones, water buffalo horns, whale toot…
-
- 3 replies
- 4k views
-
-
Does anyone have any good advice to hide a few flaws? I'm a newb when it comes to fine wood working. Now I'm straight ADDICTED to greene and greene but I'm struggling some with ebony inlays. So I cut the dado, cut the inlays, thought it was perfect, glued it in, and now there's a very small (but noticeable if you look) gap between the wood and the inlay. Maybe a 1/16-1/32 of an inch but the problem is....I know it's there. Will finish hide this after a few coats or does somebody have another technique? I did go down to WoodCraft to ask advice and they turned me on to this gap filler with a activating spray. Works great after sanding but it leaves a bit of a d…
-
-
- 8 replies
- 3.3k views
-
-
I have some 14 ft 8/4 pieces of mahogany that I dont know what to do with. I am a beginner/intermediate woodworker but I dont have a good band saw to resaw these boards. So unless there is another way to resaw, I dont really know what I can build with such thick stock. I got the lumber at a yard sale for less than a dollar a ln ft so it was a great deal. What should I do with it?
-
-
- 8 replies
- 3.3k views
-
-
I did a couple searches, and didn't find anything - I have a panel resawn and edge-glued. Spalted sycamore, but it cupped badly. I've seen David Marks flatten veneer with a sizing mix. Obviously, this is much thicker than that. Is there any way I can flatten this? I guess the other question is does it really matter. It will end up as a door panel. So will the frame keep it in shape or could the panel actually pull the door out of shape eventually?
-
-
- 8 replies
- 6.8k views
-
-
I have about 20 bf of Black Locust I'm don't really know what I could use it for. I know its rot resistant and very hard , the grain it not really that nice, kinda plain looking, but the end grain would look nice in a bread board, any ideas
-
- 7 replies
- 6k views
-
-
So I just got a great deal on some 3/4" a-c plywood, $100 for 6 sheets. I usually avoid large sheets because they are a pain for me to move around. Can anyone give me some tips on handling them? I herniated a disk in my back a few months ago and I REALLY dont want that to happen again. Looks like tonight I will be rearranging the shop so I'll have some place to put them.
-
- 16 replies
- 5.7k views
-
-
Hey everyone, I was wondering if anyone had any experience working with driftwood. About a year ago I collected some small pieces from a local beach and think they would make awesome handles for drawers or boxes. The problem is, however, that they are really fragile. Lots of really soft, mushy spots. Its so soft that it is even very tough to sand. Thankfully, it came out of the ocean really smooth. Any ideas on how to preserve the wood so it stands up over time? Thanks!!
-
- 5 replies
- 8.8k views
-
-
I'm a beginning toolmaker. I'm having a hard time finding the species of wood that was used historicly. Specificly Beech and Boxwood for wooden plane making. Beech I've seen 4/4 plain sawn, but for wooden planes the grain should be 90 degrees to the face not parralel. Boxwood is a mystery I've only seen it online once and they were out. I'm not against using alternative woods Birch, Maple, Cherry, Apple, Pear, Persimmon just having trouble finding the quartersawn perpendicular grain I need.
-
- 4 replies
- 2.9k views
-
-
I got some 4/4 roughsawn ash and maple. He said the ash is 5 years old, maple about 8-9 months. Some of the ash was wet from being stored outside, but not too bad, I assume it'll clean up nicely. I am assuming I need to get a meter to check when the wood is ready to use. I see this one on rockler for $25, is it good enough or is something more expensive worth it (or even necessary)? http://www.rockler.com/product.cfm?page=30937&site=ROCKLER What target moisture % should I be shooting for? Is there anything I should know when looking at roughsawn lumber? I am not experienced to know if it's a good piece of wood or not without it being cleaned up. Thanks!
-
-
- 13 replies
- 7.4k views
-
-
I was making a bench today from a tree I cut down from my dads front yard and started sanding. When I was done my first thought was could I put the finish on now and cut the dados later?! The grain and spalting was amazing and i can't wait to see it with finish!! Is there any one else who finds themselves in this situation from time to time? maybe we can start a support group...
-
-
- 4 replies
- 3k views
-
-
I have been looking through the website of a hard wood distributor in my area that I am considering using in the future. As I was reading through their product list, it has a column labled "Grade and Thickness" Through some additional research in the AHEC Guide to American Hardwood Lumber Grades, I have figured out the meaning of FAS, #1 Common, #2 Common. However, there are a couple I can not figure out. They are: "Select and Better" "Color no Defect" "Natural Select and Better" "Superior" "Cabinet" "Superior Color" "Superior 1 Face" "#1 Shop" Please help with some clearification.
-
-
- 4 replies
- 3.1k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·