The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
hey i just went to menards and they had a huge 16 foot board of oak that the last couple feet was high density curl. havent seen that yet but im still new to the wood working life and havent been to enough mills and lumber yards to know if this is common. so is it? how often is curly oak found i know maple is fairly common but oak? it had some incredable deep color to it and the stripes were almost black they were that rich (no dye needed) I spent twenty min talking to some 16 year old kid(lumber manager) trying to convince him to sell me the last few feet of the board. no dice his response was why would you want to own that its disfigured all these other boards have t…
-
-
- 20 replies
- 14.5k views
-
-
I've used that wood finder website, but i wanted to hear some first hand info. I'm fortunate that my first handful of projects are going to involve setting up shop and will be using contractor grade stuff, but after that I'm going to need to find a source for lumber.
-
- 18 replies
- 11.1k views
-
-
Is there any use out there for shavings that may or may not contain walnut. I know a lot of horse stables use wood shavings for bedding. But apparently they won't take walnut due to it causing respiratory issues in horses. I hate throwing this stuff away constantly. What do u guys do with it. Will other farmers take it for differant animals or are there the same concerns there. Thanks guys
-
- 8 replies
- 5.6k views
-
-
might be able to buy 600-800 bf of mixed sized wood of different species for 500 dollers for the classroom. all domestic hard wood select and better and one side planed and strait cut. what do you think decent offer or should i walk?
-
- 5 replies
- 3.2k views
-
-
Has anyone here worked with Monkey wood (also known as monkey pod)? I have some small pieces I picked up because my son liked the color (and he though the name was funny). I'm going to make something for him out of it, but I am wondering what people here might have used it for. Frames? boxes? tool handles?
-
-
- 2 replies
- 2.6k views
-
-
I live in southern California and have a neighbor who has a jacuzzi that is still in good shape, but the surround is deteriorating. They asked me if i could build some new panels for the skirt. All it is is 4 panels (one per side) that are screwed to a sub frame. I was thinking of doing something out of redwood, and making a frame with tongue and groove or ship lap vertical inserts. I started to wonder about the wood movement of redwood when it is outside. I was thinking i could do a custom ship lap and make extra deep rabbits that would allow for more movement. Any thoughts, other ideas?
-
- 4 replies
- 4.5k views
-
-
The other day I looked at a log. What strike me the most is the sudden colour variation between the sapwood and hardwood? There are many different species of woods available to us, each with a unique set of colour and texture in the hardwood. My question is what causes that sudden colour variation in between hard and sapwood that made wood so beautiful.
-
- 5 replies
- 3.5k views
-
-
Hi all, I've just inherited what are essentially offcuts of oregon beams - about 12-16 pieces of average 700mm x 200mm x 65mm (2-3 feet long and 8" wide, 2.5" thick). It's been sitting on the floor of an old shed for thirty years but is surprisingly flat and unmarked. I'm not really that familiar with the wood (in Australia), but I understand it's fairly resinous so gluing with PVA might be an issue? But also, I'm just looking for ideas of what it would be good for? I'm still a newbie, and it's free, so I'm happy to use it for practice, but I thought it looks nice, so maybe there's a good use for it? Boxes was the first thought. PS I don't have a bandsaw, s…
-
- 5 replies
- 3.6k views
-
-
So I found this board in with a batch of what was supposed to be maple. Obviously this isn't maple. Unfortunately the board has got a mind of it's own and has twisted and warped in all directions. But in getting ready to cut it into kindling I noticed the really cool looking edge grain. Any idea what it is? I am located in Central Illinios, and got it from a local guy, so I imagine it's something from around here. Thanks
-
- 8 replies
- 3.5k views
-
-
I am going to build a cradle for my upcoming great grandchild. I was thinking of using walnut but I am finding it hard finding 10/4 walnut for the stand and don't want to glue up two pieces. My question is what other wood would be a good choice for building a cradle and what wood would be good to build that I can use a walnut dye?
-
- 5 replies
- 3.9k views
-
-
Last week, I pulled out a piece of Ash from the stacks in my basement. It was from a bunch of Ash given to me from friend who had found them left in the garage when they bought a new house. I never really examined the boards closely and now think I'm seeing fresh bug damage (surface holes) on the boards. Wondering if I should be panicked. Is this likely to spread to the rest of my wood? What about to the framing of the house? Do I need to start fogging my workshop right away? Spot treat the boards? Thoughts?
-
- 5 replies
- 4.5k views
-
-
I have come across an issue when buying wood for projects. When I buy 4/4 intending to mill it to 3/4" the boards I am usually getting are less than 7/8" measured thickness. I have been struggling getting the boards flat, and still have the target thickness of 3/4. I believe that most of the stock is billed as S3S but there is still enough warp and twist to cause me issues. So far my solution has been to buy thicker stock (that costs more) and mill it down. I feel like I am wasting a lot in material and money. Is this typical from most suppliers? Should I find somewhere else to get wood?
-
-
- 12 replies
- 5k views
-
-
I was wondering if anyone has ever worked with Cypress. I have a mill near me and the prices are very good.
-
- 7 replies
- 3.6k views
-
-
Hi folks, I recently re-sawed a 4/4 walnut board in half, for use in small box making (grain wrapping) which I've done a few times with some success. Today, though, the two half-inch boards both cupped significantly along their whole length (about 28 inches) as soon as they left the bandsaw blade. I immediately reversed the faces so the re-sawn faces were on the outside, and clamped the boards back together. Like with a caul, kind of, the boards flattened against each other in the clamps. After a few hours I experimentally loosened one clamp, but that corner sprang back open as before, so I tightened it up again. Lots of clamps. Any clues on how long I need to l…
-
-
- 19 replies
- 5k views
-
-
Hey all, I could use some guidance... Got a local lumberyard (Memphis,TN) offering me 100' of white oak @ $2.35/bFt 4/4 FS $5.35/bFt 8/4 FS $5.35/bFt 4/4 QS A buddy of mine (who knows less than I do about wood) brokered the deal, so I don't even know at this point if the wood is rough or surfaced but I have a planer (no jointer yet, but am building a planer sled to hold me over 'til I can afford one) so surfacing isn't a huge deal to me. I've met the lumberyard's owner & he seemed to be a pretty straight shooting guy. I've looked at a selection of his stock & it looked to be quality stuff. Same guy also sells 4/4 S3S African Mahogany & Walnut for $7…
-
- 11 replies
- 6.1k views
-
-
I have done 50/50 glue and water, then sanded smooth... messy. I have heard of drywall compound? Anything else?
-
- 7 replies
- 6.6k views
-
-
My wood guy just got in a huge pecan tree. he had it on the bandsaw when i got there. he insisted on slicing me off a 4/4 slab that's probably 14-16" wide. he wouldn't let me pay him a dime for it. it's as green as it can be, so it still needs a year or so to dry. what can i use it for? is it suitable for a cutting board? would it be better tasked for something else? it was extremely heavy, but i think that was mostly because it was still green. i just don't know anything about this species of wood.
-
- 4 replies
- 20.8k views
-
-
As some may know (due to my boatload of questions), im in the process of making a bassinet for my son. i've made the entire bassinet out of walnut. i have walnut slats across where i want to lay the mattress. my plan was to put a layer of 1/2" MDF over the slats so i have a rigid, seamless platform and then lay the mattress on top of it. my only concern is whether or not the MDF is okay to lay his mattress on, or is it unsafe due to toxicity?
-
-
- 17 replies
- 19.8k views
-
-
Looking for any words of wisdom anyone might care to share about the following idea..... I'm looking to make a fireplace mantel with something of a 'rustic' look to it. Just last week I dropped a walnut tree on my property that has looked pretty dismal over the last 5 yr since I've lived here. The 'tree' had next to nothing for branches on it, and kinda looked like maybe Mother Nature had 'topped' it in a storm at some point. Though it did sprout some leaves each spring, they were exceedingly sparse for a tree with a roughly 14" diameter base. I'd like to use a pice of this for the mantel purpose, and have been reading some threads here about drying wood which has …
-
-
- 16 replies
- 14.1k views
-
-
How thick is S2S 1 inch material? Usually about 13/16" which can be a problem if material has twist or other deformations and you are looking to get 3/4" stock. Old-growth Mahogany from Greener Lumber LLC S2S stock has always been over 1" for me. Sometimes as much as 1/16, average maybe ±1/32. Latest project I am using 5/8 inch stretchers. Resawing fat enough to yield that, gives me 1/4 (even after finish milling) material for other projects. Makes me smile. The old-growth Mahogany is not cheap, but getting better utilization than usual lessens the pain. At this time Greener Lumber inventory is pretty picked over, but hopefully their pipeline will begin fl…
-
- 6 replies
- 3.9k views
-
-
Hi All, This is my first post to the forum, so I hope I am asking this in the right place. I just bought a pretty big stockpile of walnut from a guy in my town. Thrown in among the walnut was a random (not-walnut) board. The guy said that all of this stuff was pretty old, he found it in an old barn he was helping someone tear down. They let him take the wood for helping out with the barn. Anyway, I have no idea what it is. I planed one of the sides to get a good look at the face. Also, I don't know if this helps in the identification, but It smells kind of sweet. Here are some pictures. I included a shot next to the walnut, so you can get a good feel for t…
-
- 4 replies
- 3.1k views
-
-
If you were to make a headboard that was going to be painted, what wood you chose? Arts and Crafts style, in case you're wondering.
-
- 11 replies
- 3.8k views
-
-
Has anyone used sandeply from a big box store? I purchased some 1/4" to use on the back of some cabinets but it has a very odd grain structure and I was concerned with finishing it. Thanks, in advance. David
-
- 2 replies
- 4.7k views
-
-
I was asked to build a gavel for my fraternity at my college. We used wood from one of our retreats which happened to be Ash. When we cleaned the hammer of the gavel, ash log, with the lathe we noticed how cracked it was. My father remembered that he used to have a wood soak that involved Linseed Oil, and other ingredients, that would expand the wood and make the cracks "disappear." Unfortunately, due to dry Indiana winter weather, the cracks are getting worse and, so far, I cannot find anything on the internet. I would like to find a soak to submerge the log into or another solution that would not make the log look pathetic. This gavel is amazing and my whole frate…
-
- 2 replies
- 3.4k views
-
-
Just a quickie... Is the face layer of Baltic birch a thin veneer or is it the same thickness as the other layers? Thanks!
-
- 7 replies
- 5.9k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·