The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
I have aquired a substantial amount of Massaranduba that was being discarded due to improper handling of climate triggered instability in a decking situation. I cannot find good technical recommendations for appropriatly dealing with gluing or sealing this strikingly beautiful wood although many suppliers are beginning to pitch this wood as a substitute for scarce Ipe. How do I proceed to plan for potential project usage?
-
- 5 replies
- 2.8k views
-
-
Is other any difference when it comes to doing inlay with plywood?Over hard wood?
-
-
- 18 replies
- 12.7k views
-
-
Visiting family in Florida and, of course, I end up in a home center to help replace a few light bulbs. Wandered over to the lumber aisle and was impressed by Floridians' selection of southern yellow pine. Compared to the wretched SPF "whitewood" that we get up north, this stuff was just glorious.
-
- 2 replies
- 2.6k views
-
-
Hello, I just bought a bunch of birch plywood for some workshop cabinets in the garage. I put them up against the wall for better storage but now they have become warped. What should I do? The warping will not have a great impact when I cut them down to be used in my cabinets but how should you store plywood? Horisontaly or verticly? Regards Emil from snowy Sweden
-
-
- 7 replies
- 8.3k views
-
-
I recently bought some cherry from a guy who had it laying around but was not ever getting around to building anything with it. I talked him out of it. He apparently got it from someone who had milled it from a fallen tree. Saturday, I set about planing it with a borrowed surface planer. Gentlemen, this is at least 10 times more work than I imagined it would be; even with a nice power tool to do most of the work! Planing by gregwest98, on Flickr Part of my problem is that the planer is sitting on the floor and I have to bend over a lot. I planed this one board and then had to go inside for a nap (although I later realized that I was coming down with a h…
-
- 16 replies
- 3.4k views
-
-
Hi All, So in my family we like to use cedar boards to grill food on... you know? Like cedar-plank salmon? <smile> Anyhow, these boards are always very expensive to buy at the food or big box store, so lately I've been thinking about making my own. I also thought they could be good simple gifts to give to people. Plus, it really would be incredibly simple and wouldn't take more than a few minutes.... just buy a big board, cut it up, and sand it a bit. The only issue is, how can I be sure that the cedar I buy is untreated? I obviously don't want to poison anyone here, so I feel like that's making me overly paranoid about this. But I just don't know if I …
-
-
- 5 replies
- 2.6k views
-
-
I was cleaning out the bed of my old El Camino. This car doesn't run but it is what I'm am insured under (i'm still on my parents insurance plan) and it saves us about $1000 a year. For the past 4 years, while i've been at college, the car has been used as mainly storage and has collected a lot of junk like old electronics and wood. I was out the wood because it is bulk trash pickup in a couple days. To my surprised there was some useable wood in there but most of it being construction grade lumber and some pressure treated stuff. I only have one shelf that I just put up the other day for lumber. My question is can you store pressure treated lumber with the wood for fu…
-
- 3 replies
- 2.5k views
-
-
I have a bunch of reclaimed aromatic cedar that I was going to repurpose for an outdoor buffet but that that making the whole thing out of cedar would be a little overboard. My thoughts were to make the buffet with slates on the sides and top. Kind of a little frame and panel type action. What would would work well with this naturally reddish type of wood?
-
- 9 replies
- 13k views
-
-
My local hardwood dealer has Red Elm on sale for $2.49 per bd ft. I'm new to woodworking and have not had any experience with the wood. I'm wondering if it is worth picking some up for some future projects. If anyone has had any experience with this, let me know what you thoughts are. Thanks
-
- 3 replies
- 2.9k views
-
-
Hello, all... Brand New to the forum but had a quick question... I have access to a lot of acreage of old growth Red Oak, White Holly, some large Dogwoods, White Oaks, Gumball and a lot of Poplar trees. Located in Southeastern VA. Currently all we use them for is firewood. Some of these trees reach 45 to 55 inches in diameter. I'm thinking about getting a small mill, a woodmizer lt10 or possibly a 15 and havesting some of these trees after I fell them for woodworking projects. With one of those mills I could concievably cut a large 20 to 26 inch slab of really nice material from each slab, probably 1/8" thick. Basically, after chopping an entire 32" white oak …
-
-
- 9 replies
- 3.1k views
-
-
I am not new to woodworking, but have very limited experience due to the cost of materials. I am now looking at moving into a more full time woodworking occupation, but cost is still an issue. I have been researching my local area, and have noticed large price differences in woods cut for Furniture use, and woods cut for Flooring use. Can Flooring wood be used for Furniture products?
-
- 5 replies
- 2.9k views
-
-
Okay I just resawed about 18bf of cherry for my parents Christmas present and now of course I have a bow in most pieces. I've read about the causes of this, but my question. Is a bow of 1/32"-1/16" over a 36" length enough to worry about on a 1/2" board? I left enough material (started with 5/4) to plane off 1/16" to smooth out the surface on the resawn side so I've got a little something to play with. I'm building a wall clock so it's nothing big or anything that will have to handle any stress. Any advice would be great. I do have enough stock to start over, but I would rather salvage what I have, if possible. Thanks!
-
- 1 reply
- 2.7k views
-
-
This last weekend was a great weekend. It started out on a Monday looking through Craigslist looking for woodworking tools and some wood in the Materials sections. I came across this posting of this wood. I emailed the poster and it was still available, but due to being busy putting out a fire at work (software/production issues), I called him back on Tuesday and arranged to pick it up on Saturday. On Saturday I loaded up my boys and drove in fog so thick at times the visibility was under a tenth of a mile. I got to the place, met the owner and proceeded to look over the wood. It was going home with me! I had to decided what length to cut this up since one piece…
-
- 4 replies
- 2.8k views
-
-
I thought i would share this photo i took tonight. This is a panel of Jatoba that's soaking in a coat of BLO. While this panel has awesome grain, it's a little lacking in color. Jatoba is usually more Amber in color compared to the brown tones in the panel. I think Jatoba is really underrated. It's a Hard wood, with great grain and color, you can get in wide boards, and it's cheap.
-
- 9 replies
- 3k views
-
-
My kids and I got the idea of making an overly nice portable worm box for this springs fishing and one of the first things that came to mind was what kind of wood and finish to use? Any suggestions for that or other considerations that stand out to you that I should take into account? I got this week off and am hard at work making christmas presents and thinking about the next projects. Thanks in advance.
-
-
- 10 replies
- 3.2k views
-
-
Hello All, Background: I am building a project out of red oak, and I am very close to wrapping up this build. I've already pre-finished parts of the piece and am sanding the rest to fine grits to begin the final finishing. A few weeks ago, I noticed that the lid / top piece for this project had warped badly, for some unknown reason. I've done far too much work on this lid to replace it, so I did my best to fix it. I very lightly dampened the surface with water and then pressed it under light weight / pressure for a week to return it to its flat shape. This actually worked quite well... the piece is almost good as new, and has retained its flat shape for 2 wee…
-
- 11 replies
- 4.7k views
-
-
Found a new site with a comprehenive wood database: www.wood-database.com
-
- 3 replies
- 2.8k views
-
-
Here's two shots of samples from 200 bd/ft of BEAUTIFUL quartersawn white oak I purchased. The wood had ray flecks rarely seen in modern material, yet poor drying case hardened it to the point of unusability. One photo shows the figure, the other shows how it literally fell apart as it was resawn. I brought it back to my dealer for a refund, who in turn plans to return it to his source. Next stop for these pieces, my fire pit...
-
-
- 8 replies
- 3.5k views
-
-
I've got a problem and sort of a blessing too. I'm currently living in Germany and hadn't learned to much about wood before I left the states either. I barely know any wood types other that basic ones like Oak, Pine, Birch wood, and such. Even that I know those is amazing as I probably couldn't identify them out of a line up of 5 pictures. However I am smart enough to know about supply and demand and that resources are in some places more common than others. For example I just started looking for Purple Heart over here and found that it isn't very common over here and therefor probably more expensive. That got me to thinking and searching for the benefits of being o…
-
- 4 replies
- 2.7k views
-
-
I am very excited to try out some new wood types. I picked up some small amounts of zebrawood, jatoba, peruvian walnut and bubinga for some quick projects for my wife and daughter. I also got some great curly and quilted maple - not new to me but two of my favorites and always beautiful. I'm thinking of pairing the zebra wood with walnut, and the maples with either bubinga or jatoba. Thoughts? I am also going to pick up some dye to pop the grain on the maple, a first for me. Looking forward to it.
-
- 8 replies
- 3k views
-
-
Does anybody know of a good resource for learning well the different types of common woods by eye. Always loved wood but never took the time to learn them. Always just enjoyed the piece I was holding and it's beauty without caring what the name of it was. Second question that seems to be to simple to talk about or I'm just not able to find is what is up with plywood in fine wood working. Why would anybody want to use it constructing a fine piece of furniture. I mean I know that it makes the piece more affordable, but there must be other benefits to it or people wouldn't use it so much. I mean they would just do less projects and spend more money on the solid wood…
-
- 6 replies
- 2.9k views
-
-
I'm building a small project partially out of padauk. It's splintery, hard on my machines, irritates my nose and throat, leaves an orange mess everywhere, and poses finishing problems due to its oily exoticness. Yet I cannot resist its beauty. I must use it, and suffer through. What's your latest favorite wood that you hate?
-
-
- 7 replies
- 2.8k views
-
-
I am new to woodworking and am about to start building a corner cabinet/entertainment center. It is going to be painted and I was wondering what wood will be best for the face frame and the door rails? I am building the rest with birch ply. Thanks - RJ
-
- 4 replies
- 2.7k views
-
-
Have any of you guys used this wood before? If so, did you like it? My sawmill guy has some that is in the kiln now for $2.25 bf that I am thinking about stocking up on for future projects.
-
- 2 replies
- 2.7k views
-
-
I was building the tool chest from the web sight. It was going together perfict. Until today. I way cutting the bevels on the miter saw. When one if the underlying sheets of plywood blow out from the edge. Leaving 1/8 gap along the edge. Any digestions how to fill this in? I know epoxy would work. Bur im thinking a wood filler to match the BB ply wood. Sorry I don't have. a pic to show every one.
-
- 3 replies
- 4.8k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·