The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
Anyone had an experience like this one? I came home from work and my brother-in-law proudly proclaimed he gave me some hardwood that had been hanging around his property. I went into the basement to see and there in the corner is a few dozen big pieces of wood that was covered in powder post beetle holes. I, screamed inside, but had to stop and figure out how to be polite while letting him know that these pieces were infested. After he left, i started moving them out of the basement. While moving them, I got hurt, and took off my glasses to look at the scrape i recieved. Then went back to work. Unfortunately, my glasses were still outside and in the spot where the…
-
-
- 10 replies
- 3.4k views
-
-
I am going to be building a bookcase for someone who would like it to look like what they think is cherry. I was given a sample of the desired color and instead of being cherry, it's really just whatever type of wood stained with that real dark cherry/red mahogany color. So to keep costs down, what sheet good would you use? In other words, what sheet goods resemble cherry in terms of grain and such? I figure that the dark stain will mask the wood type so as long as it has the appearance of cherry stained really dark, it would suffice. Adam
-
- 3 replies
- 2.8k views
-
-
Hello all - I just had a sweet gum log cut up into lumber from a tree in my yard. The tree was in decline, so we bit the bullet and had it cut down. I had the arborist save a 8+ long section on the bottom. The sawyer brought his protable WoodMizer to the house and cut in on the spot. There was only one hiccup in the operation. He hit a cut nail on one of the cuts and trashed the blade. Afterwards, the sawblade looked more like a mini-rake with how bad the teeth were bent. I'm glad he brought an extra blade. He cut most of it into 5/4 boards, with two at 8/4. Most of the boards are 13" - 15" wide. With the broken balde adding $25, it cost $275. Not too bad. Has any…
-
- 11 replies
- 26.8k views
-
-
i cut up some logs to turn into bowls. the wood has a very pungent smell and the grain tends to want to seperate as it dries. i figure its eather birch, aspen, or sycamore. im having a hard time turning the wood as it wants to chip and break and catch alot. anyone got any advice on how to turn/work it and is the wood just a bunch of junk that i should just toss in the garbage? i dont think its sycamore since it is a pale wood like maple. and the tree was a large tree 100 plus feet so im thinking its not birch so im leaning more towards aspen.
-
- 2 replies
- 2.6k views
-
-
Hi, I have seen your video on youtube ( ) about making an end grain cutting board and the advantages.It is mentioned that wood has long latitudinal fibers and when you chop with a knife these fibers get damaged so it is better to have a end grain where the wood had longitudinal fibers and these fibers have some elasticity. however, when wood(logs of a tree) is split .They are usually split in the longitudinal way. Now coming back to a end grain cutting board, when we use a meat cleaver with force to chop through the bones, wouldn't this split the wood in the same fashion. Am I missing some thing here...
-
- 1 reply
- 2.8k views
-
-
Hi! I am in the process of making a swinging porch bench out of western red cedar, more like a hanging day bed. It is green, clear cedar. I knew that it was going to be "wet" since it is green cedar but some of the boards as I was milling were actually really wet coming off the planer. I have milled the boards to within 1/4" of my final deminsions so that when the wood moves I might still be able to mill it square and flat agan. But with as wet is the boards were I am now worried that it is going to move a whole lot more on me. My main question is if the bench/hanging day bed is going outside anyways, how dry should the wood be before I start working it again. I do…
-
- 2 replies
- 3.2k views
-
-
I bought rough lumber today to start a new project. I am building both my children loft beds. Given the project I decided to simply go with pine. I got the bulk of what I needed, but they did not have pine 4x4 posts, which I intended to use for the uprights. The guy at the yard directed me to 4x4 Hemlock posts that he had in 8 foot lengths. He said the price was the same, so I made the amateur mistake of saying "ok". I loaded up my trailer with pieces and headed home. I rough milled the boards tonight, to let them acclimate in the shop. I have never worked with Hemlock before and I found these pieces (dry) weigh a ton. No comparison to light weight pine or e…
-
- 6 replies
- 5.3k views
-
-
Hi guys, I just came across about 600 bd ft of red oak flooring that has never been resanded and poly'd. Tongue and groove and the iron nails and all. I have a planer, also my house is all hardwood except for the shop, concrete. Can't put it over concrete as the moisture level etc...what the heck can I do with it now? Plane it and sell it? or, I'm just stumped here. Thanks in advance for suggestions. I had thought of an adirondack chair but I personally think they're fugly. Derwood
-
- 10 replies
- 3.2k views
-
-
I am currently building a "keezer" (google it) and wanted to use walnut. I went to the lumber yard to pick out about 50 BF and couldn't find enough wide boards in walnut so I started looking at the african mahogany. It was $1 BF less than walnut and a better selection of boards. I picked up this 20" wide 4/4 slab while digging around. My keezer project does not require anything this wide, so I need some suggestions on what project would best use this WIDE board... I need to build a dining table that will be in the same room as the keezer, so I may use it there.
-
- 6 replies
- 3.9k views
-
-
I have heard that you can advance the aging of cedar by treating it with a mix of baking soda and water. I have never tried it, but I have a small project coming up that I would like to match a ten year old cedar fence. Has anyone given this a try? Any magic recipes? Tips?
-
- 8 replies
- 67.8k views
-
-
What's the difference? I've not bought either before, I just want to be prepared for when I do. My local big box store (Kent Building supplies) has what it describes as birch shop grade ply, and oak veneer shop grade ply.
-
- 2 replies
- 9.6k views
-
-
i have a chunk of magnolia tree. its not huge but it is a solid 3-4 inches thick. has anyone worked with it before? is it good wood? turn well? carve well? what can i expect from working with it?
-
- 9 replies
- 6.3k views
-
-
I hope I'm putting this in the right forum. I looked around and searched the site but couldn't find any discussions of saw mills so .... here goes. I have a piece of property that is heavily timbered (21 acres). I plan on harvesting roughly one tree a year to supply my woodworking needs. I certainly have no desire to denude the area, so I'll carefully select which ones to harvest. Consequenty I've been lloking into purchasing a saw mill to cut my timber. Those dang things are SPENDY!! I believe I have settled on a great one. I'm pretty focused on the TimberKing 2000. Looks to have great capacity, enough automation to make a one person operation pretty doable and por…
-
-
- 8 replies
- 7.4k views
-
-
I had to pickup a sheet of 3/4 cherry ply today. Paid over $120 for it. Might have found it cheaper, but most of my local suppliers are closed on weekends. I remember paying around $50/sheet just 4 yrs ago. What happened? Adam
-
-
- 12 replies
- 5.5k views
-
-
Has anyone use Phenolic plywood for jigs or cabinets? What is your opinion? I got a piece at woodcraft 24x48 and it cost me 50 bucks!! Seems pricey but I wanted to give it a try. Does anyone know where I can get a whole sheet (4x8) in Washington State? Woodcraft only sells small pieces.
-
- 6 replies
- 5.5k views
-
-
Howdy fellers. I have an outdoor table top that is a piece of crap and fell appart. I heard somewhere that quartersawn white oak can do just fine in the outdoors of Southern California ... There is only one way to find out. I will make a top and check it out. Probably I will use for the joints West Systems epoxy to make sure everything is good and tight. Other than that I will let it rip. Finish .... oh yes of course, I am the Sick ... Sikkens Gaucho. Sikkens Natural. Wish me luck ... we will see how this holds up in a year.
-
-
- 4 replies
- 2.9k views
-
-
So this past weekend we had a mishap with the washing machine and water leaked down into the basement and all over my table saw and, possibly worse, two unfinished cutting boards made of purpleheart and maple. They basically sucked up most of the water themselves (and what they didn't get the table saw top did) so they are unusable at this point (severe cupping and cracking). What I'm not clear on is that most of the cracks are at the joints. I used Titebond II glue for this. I thought glue joints were supposed to be stronger then wood? I would have assumed the wood would break, not the joints. So are there any special requirements for gluing up purpleheart or did I ju…
-
-
- 3 replies
- 6.6k views
-
-
On craiglists in my area at least, a lot of old pianos are being given away for free. Mohagany and cherry especially. I used to work for a moving company in school and it was tough doing pianos. Now I am looking at them as lumber and I wonder if it's worth it to answer an ad and take one. I can disassemble them on the spot but that takes a lil while and I don't want to intrude own their time too much.
-
- 9 replies
- 3.3k views
-
-
Hi All, My preteen daughter had 11 of her closest friends over this past weekend and they decided they wanted to have s'mores. I had just barbequed burgers and dogs so the coals where hot, but they were no flames. So I got to thinking, I have a shop full of wood, what could I toss in my grill to give that campfire feel? I immediately discarded pressure treated and plywood. But what about the douglas fir 2 x 4's or the scraps of red oak from the project I'm working on, or some of the redwood from the gate that I built last year. I ended up finding some hickory chips that I threw right on the coals rather than soaking in water for smoking. So I throw the quest…
-
-
- 15 replies
- 11.9k views
-
-
In the past I have used cherry, walnut and maple for the cutting board gifts du jour for my wife to her friends. Is hickory and appropriate wood for a cutting board? What are other recommended woods for a cutting board?
-
- 7 replies
- 17.4k views
-
-
I am looking for a good source for hardwood in the Issaquah WA area. Any ideas? Thanks
-
- 4 replies
- 2.9k views
-
-
My name is Steve, and I'm a tree killer - I was raised in woodshops, and I'm a designer/craftsman that works in the medium of print & furniture, so I've basically made my passion and way of life dependent on chopping down trees. I recall once as a kid in my Grandpa's shop in-between him trying to teach me about hand tools (of course I wanted to use the big machines), he was telling me about where the wood we were using came from, and the idea of replacing the trees we use so someday I'll be able to teach my grandkids the same thing in my shop. This has always been in the back of my head, and lately it's been more at the forefront of my thoughts. My dilemma and w…
-
-
- 8 replies
- 3.7k views
-
-
Here's the quandry... A potential client wanted to know if I could make a coffee table or two out of a GIANT maple tree the fell in their yard. The trunk is approximately 48" - 60" in diameter and in two sections, each about 6' long. She would like to make the coffee tables out of cross sections of the tree. I have done something like this before, but nothing that size. Here are my questions: 1. What do you think the minimum thickness would need to be for stability? I'm thinking 8" - 12". 2. I was going to use Wood Juice to stabilize the wood. Is this the right way to go? 3. Any "imperfections" I would use a dovetail dutchman on. yes? No? 4. The tree has already …
-
- 11 replies
- 6.9k views
-
-
Since I'm getting my first go of Japanese Hand tools, I was wondering what would be woods similar to what the Japanese use that would be available around America? To sat it another way, what are wood commonly used for different projects (furniture, decorative, utilitarian boxes, etc) that there is something similar here to use to recreate?
-
- 4 replies
- 13.2k views
-
-
I have 5 month old twins that are in the "it's in my hand, it's in my mouth" phase. I want to start making some simple toys out of wood for them which leaves me with three questions: 1. Are there any types of solid wood that I shouldn't let them chew on? 2. They make paint that kids can eat (you can get it at Michael's) but what other finishes are safe? 3. Not really about wood but what's a good scroll saw for less than $200 or what should I watch out for when buying a used scroll saw? Thanks for your help!
-
- 7 replies
- 4.5k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·