Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. So last weekend I went out to the garage to continue building some end tables and the wood is fine. Come today, the wood is warped pretty bad. It requires too taking off too much to be able to use for my 3/4 parts. What can cause it to change like that? The wood was purchased from a sawmill and was kiln dried.It got pretty warm out today compared to last weekend, could that have anything to do with it? Thanks

      • Like
    • 21 replies
    • 4.4k views
  2. Started by rodger.,

    Does brown maple have the same properties as maple (hardness, etc)? I am under the impression that they are one and the same, just from different parts of the tree. I could very well be wrong though, I have little experience with brown maple. Almost all of the building I have done with maple has been maple ply with solid maple face frames/doors.

      • Like
    • 5 replies
    • 11.3k views
  3. Started by jimmykx250,

    I have two beams that are laying on the ground buried in some bushes a block away from my house. The guy (developer) who owns the property said make me an offer. They were used to support a ranch style house that no longer sits on the property. They seem to be in decent shape and I will need to get someone out to re-saw the materail into useable pieces. The two are 25 foot long and 16" x 12" . Whats a fair offer per board foot? Taking into consideration the labor to rip it and all.

    • 2 replies
    • 2.8k views
  4. Started by jimmykx250,

    I saw an add for steamed walnut flooring for sale the other day. Whats up with steamed? I dont understand this process?

    • 13 replies
    • 5.6k views
  5. Started by WeilWorks,

    Construction crews are clear cutting an area near my apartment. They already have taken down many trees and look like they will be taking down more. Maybe 10-20 trees, various species, 1ft to maybe 3ft wide. If you want me to ask about them I wouldn't mind. (might be able to post pics if needed) I'm in Lafayette, Louisiana. Send me a messege (or email, tweet, whatever) if you want to know anything else.

    • 3 replies
    • 3.2k views
  6. Hi all, I'm new to the site and new to woodworking in general. I'm looking to build a table out of some Walnut Slabs for our dining room. I just wanted to see if I was going down the right path. I've found some slabs at a local mill and before purchasing just wanted some advice. They are 14' long so I'd be cutting down to about 7' and joining two slabs to get my desired width. I'm just wondering about the cracks in the wide ends of these boards I'd be using. I would stay away from the 7 most likely, though perhaps use those for something else. Also the cost on each slab is roughly 400 does that sound reasonable? I was going to do a biscuit joint to join them, t…

    • 14 replies
    • 4.1k views
  7. I know construction pine isnt really worth getting in 2x4 form, however i have someone w/ reclaimed wood from an 1850's era farm house, both 2x4's and 2x10's. I am unsure of the cost, but would this old pine be worth picking up? what would be an appropriate price to pay?

      • Like
    • 8 replies
    • 4.1k views
  8. Started by kharmachanic,

    Newby here.. So I will start with what is probably a pretty easy one.. I acquired (free) 2 large and very heavy doors, they claimed they were Mahogany and approx 20 years old. my goal is/was to harvest the wood for making small instruments. It had a redish stain .. so I took a quick finish sand to this and it actually looks a little more like Oak .. but like I said Im new to this The wood is 2.5 in thick, there appears to be some straight grained (quartersawn?) pieces and when sanded even after 20 years it gave off a very strong and distinct smell kinda like sandlewood or even some KOA I worked with once.. Can anyone give me an idea.. these are pics of the doo…

    • 11 replies
    • 3.3k views
  9. Started by Brohymn62,

    I recently came across (4) 4" x 12" x 16' doug fir beams and I was wondering if it would make a good workbench... anyone ever mill a workbench out of this type of material? Any challenges I might not be seeing?

    • 7 replies
    • 8.4k views
  10. Started by linkmx674,

    what is the best way to stack lumber? the lumber yard that i bought it from had it stacked up against the wall. so when i brought it home i did they same. should i be stacking it flat on racks?(if i had lumber racks but i don't) I'm letting the wood sit to my shops temp before i work with it. this is my first time buying rough sawn lumber. all the other projects have been with s4s from save big money stores.

    • 6 replies
    • 5.6k views
  11. Started by cusas6,

    Hi All, I'm just getting started at building nice things out of wood. I've done lots of rough construction. Built a few really nice sheds and what not, but now I want to build some nice furniture. The first thing I built was a dog gate. Used some red oak from Home Depot, sanded it down, used dowels in my joinery and all and all it turned out nice. Probably a little overkill for the 3 chihuahua's we have, but it works. My next project is to build a side table that doubles as a dog crate. I've spent several weeks with Sketchup and think I'm ready to get building. I've got the tools (grizzly jointer, dewalt planer and a porter cable tablesaw, bosch router, etc). The o…

    • 15 replies
    • 3.9k views
  12. Started by duckkisser,

    looking around for a good deal on veneer packs. want to have for small projects for the classroom. this seems like a decent price but anyone come across a better deal or can recomend anything in particular. http://www.woodcraft.com/Product/2003323/3973/Veneer-Sample-Pack-50piece.aspx

  13. Started by Bombarde16,

    In Nassau for spring break and wondered if there might be anything unique I could add to my lignarium. Any hardwood dealers (I.e. not construction lumber) in or around Nassau that would be worth visiting? Any unique sorts of island-dwelling trees that a local merchant might have a line on? This would have to come back with me in a checked bag, so I'd be looking for smaller boards destined for inlays or other precious, decorative bits. Sure the Internet will land you any number of online merchants who'll feed the habit until your bank account runs dry. I just thought it might make a nice souvenir and an interesting diversion from the usual tourist traps.

    • 6 replies
    • 2.9k views
  14. I'm just wondering if any of you have any thoughts on white cedar (northern, Atlantic) and whether you have ever incorporated it in indoor applications/furniture. I know it's not as fashionable as the exotics and the more standard furniture woods, but I'm curious whether anyone has experimented with it. I'm sure there are reasons other than "fashion" that it's not more widely used indoors. Red cedar, cypress and other softwoods are often used in indoor applications. How different in working characteristics, etc, is white cedar? Is it a sappy wood? I have a local sawmill that specializes in rough cut Vermont white cedar, selling mostly for traditional uses. I couldn't h…

    • 6 replies
    • 5.1k views
  15. Started by suiciedchild,

    Alrighty, never seen this one before. i got two pieces , both about 2x2" and 4' long, they were the bottom supports for a skid of Brazilian Cherry hardwood flooring, i always grab them usually something like brazilian cherry sometimes purpleheart or cumaru . but this had a crazy looking grain to it, i hit it with my hand plane to get rid of the rough sawn edges to get a good look at the grain, and holy crap. grabbed some BLO and rubbed it on and the picture is what i got. Its not lacewood off the bat , i already had somebody suggest that but it just doesn't have those big ray,s the grain changes direction all over the place i believe the country of origin was Paraguay, …

      • Like
    • 21 replies
    • 5.1k views
  16. I have a potential source for free wood from old barns that are no longer standing. Wood is located in Reinholds, PA, about an hour and a half west of Philadelphia. Barns are more than likely "at least 100 years old". I believe this area would have had a large Mennonite community, based upon my time spent in Hershey and that the surrounding areas had been largely Mennonite. I'd love to "reclaim" this wood and put it to use! I have a feeling it's all just sitting outside in a heap and has been for a long time. I've also been told that there are some standing barns that would be ok to take from, as none of them are in use. What should i look for for good wood, both wo…

      • Like
    • 5 replies
    • 3.3k views
  17. Started by rodger.,

    I am not a fan of building with red oak, but a lot of people in my area are. So everytime I work with it, my wife says that the shop smells like dirty diapers - haha. When machining lumber, is there any types of stock that offend your nose? I like pine and cedar, don't mind walnut, but despise red oak.

    • 20 replies
    • 7.4k views
  18. Started by DeanJackson,

    I have had wood in my (dry!) basement for 6 months. 5/4 QS White Oak. The last 24 hours have been humid and rainy, but dry for months before that. (Pittsburgh, PA, and winter makes it pretty darn dry here.) I ripped the oak down the middle today, aiming to make 2/4 white oak after it was planed... and holy hell, did it bow out in the middle! Wait and hope it improves, or hurry up and plane it before it gets worse?

    • 3 replies
    • 3.2k views
  19. Started by StrangeRANGER,

    Does anyone use 2x4s cleaned up in furniture? By cleaned up I mean jointed and planed square.

      • Like
    • 18 replies
    • 15.2k views
  20. Started by mikepugh,

    Hey everyone, I'm torn on my research about using western red cedar 4x4s for fence posts in my back yard. I live in Northern VA so the climate can get hot in the summer and cold in the winter. So far I've read a lot of people saying that cedar posts will outlast pressure treated pine and others that say it'll rot very quickly. To make matters even more confusing, I have one contractor who will install them over gravel within concrete for me and another contractor who refuses to use cedar posts. I've also read conflicting advise on whether or not to coat the bottom of the post that gets bedded into the concrete. So I've decided to come to these forums and see if anyo…

    • 7 replies
    • 48k views
  21. Started by duckkisser,

    i was given some locust wood and it turns realy nice. no chiping or rips, little catches. it has a nice color to it with little smell or iritation from the turning.can anyone tell me how it ages? does it darken alot or turn any odd colors?

    • 6 replies
    • 3.8k views
  22. i'm sure there are a number of people with a similar situation. I don't have room in the house for the tools or wood. I do have a garage though, with ample room. However, it isn't heated, nor it is insulated, and it's detached. while it has some sort of ancient composite boarding up, the temperature is pretty much what it is outside... humidity is probably more or less the same as well. I really don't have the ability, time, or budget to renovate the garage... believe me, i thought about it! removing the composite and covering the place with insulation and drywall/plywood and installing some sort of electrical or wood heat source. the simple fact of the matter is...…

    • 4 replies
    • 8.8k views
  23. Started by ztifpatrick,

    I cleared some old Southern Yellow Pine floor joists out of an old building. I knew the building dated back to somewhere in the 1800"s. Then I noticed someone had signed their name and added a year on one of them, 1864. So I pulled the nails, some screws from recent times and cut some of the bad ends off. This is a picture of one off those ends. Look at how close those growth rings are! We counted over 250 rings. and some are misissing! I never thought SYP grew that slow? Anyone with any knowledge on this type of old wood. Extremely heavy. So it would seem this tree was growing somewhere in the US around the early 1600's? Chris

      • Like
    • 5 replies
    • 4k views
  24. Started by rick@whydoit.com,

    I have some sycamore that's been sitting in the garage for about a year. One board I wanted to use has a pretty nasty twist in it. Thinking I might be able to tame it, I ripped it on the bandsaw. Then those pieces - 2 at least - twisted further. The goal was to rip, flatten and glue back up with 2 other, wider boards to make a desktop. One piece, I tried to take the twist out on a jointer. The board started at 5/4, one side is now 5/8. And there is still a bow in it. A second rip I've tried to get the full length to sit flat on the bench by hand planing the twist out. Still has a bow. This one is the hand planed one...

  25. OK, I know I am a dork for buying this, but it just seemed like too much of a good deal. I just got 1,650 BF worth of Poplar, cut from FAS boards, with a final size of 31/32"h x1 3/4"w x 145" L I'd like to see what you guys (and Gals, if present) think that I might have paid...I'll reveal that later. Now the question becomes...what to do with it? And the followup...is it best to paint, or use a conditioner and stain? I look forward to hearing your thoughts! I have attached Pictures for your viewing pleasure...

      • Like
    • 32 replies
    • 12.5k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.