Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by Bobby Slack,

    Hey guys I am using my Lie-Nielsen But Mortise plane with a scrub iron. I am planing in the same direction as the grain and getting tearout. The idea is to create a texture. Why is this happening? Is there a way of avoiding tearout? Thanks.

  2. Started by Bombarde16,

    What do you use when you don't care what something looks like? i.e. Internal parts, back panels, etc. Tulip poplar or a generic, needle-bearing tree (spruces, pines, firs, etc.) that's sold under the broad umbrella "white wood". Why?

  3. Started by wdworking,

    Attached is a piece that has been resawn and I am in the process of planing the rough sawn side. This cherry was rough sawn over twenty years ago and am seeing areas of color changes. Normal? Will it come together color wise? A couple (small) areas of the grain reversing as well.

  4. Started by agab6601,

    Happy Haloween to everyone! A little early of course, but I would like some in put on this as I feel it warrants some discussion. In the context of furniture making is plywood really evil? What I mean by this statement is, is it posible to build high quality furniture and use plywood? When I say plywood I am talking about cabinet grade plywood with cherry, maple, etc veneer on it, not construction grade building materail stuff. For example I want to build a chest of drawers and I am thinking about using it on the sides instead of solid wood and also in the drawer bottoms. Now the stuff I use in the drawer bottoms will not be same as the plywood used on the outside of th…

      • Like
    • 48 replies
    • 13.3k views
  5. Started by duckkisser,

    Hello folks i am trying to set up an identification board in my classroom showing off different types of wood. i am making the pieces to be 1/2 thick 4 inches long 1 inch wide. I dont like to ask for hand outs but this is just too big a task to set up in any kind of hurry by myself so i need help. I was hoping that you guys could help me get some wood from your scraps. i only need pieces about that size to fit inside a envelope. i would be more then happy to give you some money for the stamps. here is what i have so far if you have something that is unusual(for instance someone talked about having magnolia) or if you have something that is not on the list please contact…

    • 22 replies
    • 6.1k views
  6. Started by wdworking,

    I work with a guy who had some Cherry to sell and it's rough sawed about an inch thick ranges from 4 inches wide to 9 inches wide and some of the piece's are 8 ft long. It's been in this out building for years. he knows that it's been nearly twenty years since it's been in there. Only a couple are cupped and from my untrained eye, it will need a lot of planing to get the very rough saw marks out of it. I figure I have a couple hundred B.F. of it. For 125.00 is it a good deal? Would the age of it make it a better or worse deal? Thanks. Craig

    • 21 replies
    • 6.6k views
  7. Started by Wcndave,

    Anyone using solidwood has to dedicate most of their design and processing to allowing for movement. However what about veneers? let's say I have 6mm ply and put on a 2m veneer, and it's 90cm across? I assume the glue simply prevents it, however the wood wants to go somewhere, would you not expect cracks, or a bend in the entire piece. I never really thought of it before, however it came to make after watching Marcs episode "wish you veneer"...

    • 11 replies
    • 7.3k views
  8. Started by jHop,

    So I have visited the website for a company locally, A Piece of Cleveland, and found their story to be interesting. It has provoked some thought on my end, about locating alternative sources of wood. Namely, wood that has been used in other constructions. There is a video of their story, which I'm attempting to post here, but the short story is that they take apart various buildings, disassemble the pieces into individual sections of wood, and then repurpose those materials into other furniture. This goes beyond just going to your local Habitat For Humanity ReStore location and installing a door that was used in another building somewhere. They both create fu…

  9. Hello! I am looking into treating some beautiful lumber that I got from my Grandfather's old barn, that is infested with powder post beetles. I'm looking to use this lumber for making furniture, cabinetry, a coffee table and maybe even for turning some bowls. I have been told that Boracare is the way to go. (If anyone knows any other better solutions please let me know!) If I were to use Boracare, what will the outcome be? Does it have any effect on the appearance of the lumber, post-treatment? Staining/discoloration? Does it leave a residue? Can this residue be planed off? Will the chemical seep out or become crystallized on the exterior of the treated wood at a…

  10. I am hoping that this stimulates a few new contacts in terms of wood supplies for me and others. I currently use P.J. White Hardwood Ltd. in Vancouver for my supplies but I am trying to find other good sources of wood for our craft. I am interested in Hardwoods, Softwoods and Exotics but was thinking that there may be a few small mills and suppliers I am not aware of in the province or elsewhere in Canada that may offer better pricing, wood and variety. US locations are welcome as well but I am not sure about how much I will get dinged at the boarder when it is shipped in. I would love to find a few BC mills or exotic suppliers who offer good prices, quality wood a…

  11. Started by candlerain,

    Hi guys... I am VERY new to woodworking. I got myself a bunch of nice tools but I am wondering where to get nice wood for projects like the cutting board that Marc did. He used maple and purple heart I believe and they were nice chunks... I went to Home Depot and Rona and they do not have this kind of wood (only some maple boards). Where do you guys get nice wood for your projects? Thanks a million, Pascal

  12. Started by Cynthia in BC,

    This is my first question so please be gentle. I'm a greenhorn. I had to cut down several "big leaf" maple trees last summer and I saved several big pieces from the trunk bottoms. I brought the pieces inside my shop (with difficulty) and have them off the floor on boards, painted with latex paint and dusted with anti-insect powder. No cracks yet. I have several pieces that measure about 28" diameter and 28" high. I want to make something that is about 20" X 20" X 20" high, think of a cube that's hollowed out underneath, like a small cube table. My problem is that obviously the wood is wet, but I don't want to wait until 2050 to work with the wood. What do I do?…

  13. Started by chicks82,

    Does anyone know where to get some? I know it's probably not cheap and I would only want to buy it from a dealer that is ethical.

      • Like
    • 5 replies
    • 3.4k views
  14. Started by duckkisser,

    my brother cut out his lilac tree/bush and i went and grabed it up i hear its nice to turn or carve but from what i hear you have to be careful preping it because it tends to split and crack easily as it dries. well i jumped on the lathe and took the bark off and as im triming it up im thinking it will smell a little flower like but nope. It smelled like a pumpkin takes me back to my distant child like memories of holloween. specificly it took me back to last week when i carved out some pumpkins just for the hell of it after 6 years of not doing anything for holloween. anyone ever used lilac? and what do you like to use to seal up your wood as it dries? preferable some…

    • 4 replies
    • 8.6k views
  15. Started by BenMinshall,

    I went to a property auction at a barn outside of town where apparently an old woodworker must have lived. There was a whole section of the barn with bunks and bunks of carefully stickered hardwood stacks all for sale. I ended up bidding on this pile of 7/4 (yeah that's right) and 4/4 walnut. The thick ones are about 8' long and the thin ones are about 12'. My estimate is about 200 board feet of black walnut in this stack, and I paid $225 -- $1.12 / bf for black walnut is not too bad! There's no telling how long it's been sitting in that barn, but I'm guessing quite a long time based on how much dust was on everything. The color of the wood makes me think this was p…

    • 5 replies
    • 5.2k views
  16. Started by wdworking,

    I I am just now getting to hand plane my 20+ year old Cherry. Attached are a couple pics of what I have. What I am seeing is light and dark areas. Light of course is smooth and the dark is rough. I have gotten past the saw marks. Is the grain changing directions? I don't have a trained eye for this stuff yet. Can you tell from the pics what's going on? Thanks, Craig

    • 3 replies
    • 3.2k views
  17. Started by GNiessen,

    I have a White oak board that I had cut for use as a door threshold and even sealed the surface with an epoxy paint. And it decided to warp on me while sitting in the shop for a couple of months waiting to be installed. Is it a lost cause to try to wet the concave side and try to get it to straighten a bit?

    • 9 replies
    • 7k views
  18. Started by Anson,

    I have a friend that had three large Laurel Oaks fall over in a typical Florida storm about three months ago. I will be plain sawing it with a chainsaw and a guide that runs along a 2x4. My question is what would be the best thickness to saw it at. Also I know plain sawing is less wasteful but would quarter sawing really be worth the extra work and waste? He does have a band saw that has a 10" capacity would it be best to cut wide eight inch boards and the resaw them on the band saw to say 4/4 so they can be used as 3/4 stock once dry? I don't know if I will ever need stock thicker than 3/4 I should probably have some on hand though if I ever need it. Also can I get good…

      • Like
    • 14 replies
    • 5.2k views
  19. Started by Lucas,

    I was given a few old pieces of wood (100+ years old) that I am trying to identify. I ran the faces over the jointer to clean them up, but I'm having a hard time determining the species. I'm sure is a softwood, since the large piece is fairly light for the size. My first guess was going to be pine, but it didn't have the pine smell during the milling process. Since I don't have any experience with using reclaimed lumber I was hoping someone could give me some advice on the easiest way to identify the species.

    • 3 replies
    • 4.6k views
  20. Started by anvilheadmarty,

    Hi, my name is Marty Szaniszlo,(don't pronounce the "Z's"), I have a question about materials for Arts & Craft style furniture. I aquired a lot of rough sawn cherry lumber from a friend. It filled half of my basement. My wife and I are fans of Mission style furniture. My question is, would it be a terrible sin to jump protocol and make Mission furniture out of cherry instead of white oak? With all that wood in my basement now and then to tell my wife I need to go and get white oak to,oh boy. She would have to make a serious decission. Whether to shoot me at sunrise or hang me at sundown. Wives just don't understand political correction when it comes to woodworking de…

  21. Started by Nick2cd,

    i picked up a couple pieces of scrap flooring from our local habitat for humanity re-store. it's quite dense and heavy for its size. i made a wooden spatula with some of it. i'd like to know what it is before i use it in any more food contact applications. people at the store had no idea what it was. anyways, im trying to figure out what kind of wood it is. it almost has a red'ish hue. anyone know what it is or may be? here are a couple pics. here's a pic of this wood next to some cherry and walnut for some color reference.

    • 8 replies
    • 3.6k views
  22. Started by duckkisser,

    ok i was wondering if anyone had ever cut up a lilac bush into wood for a project. i know not big enough for a board but thought maybe for a carving or handles or some kind of turned project. how well does it machine? how well does it finish, is there tear out? does it tend to split? poor strength? is the wood porus or solid let me know as im probably doing to cut a part of stem off to make a block for our identification board in the classroom

    • 3 replies
    • 4.4k views
  23. Started by sj2494,

    just out of curiosity how much would a 4x8 sheet of zebra wood veneered piece of mdf 3/4 inch thick would be they must have used about 80 sheets at work and i couldn't believe the guy installing them when he said 400 a sheet what do you all think

    • 2 replies
    • 3.7k views
  24. Started by tdale51@yahoo.com,

    Hello all, A friend at work has somewhere between 200 400 Bdft of air dried walnut that's been taking up space in his grandfathers storage building for several years. He's looking to get rid of the wood for the space and is willing to give it to me. All he's asked in return is that I build his grandmother a wall shelf which I'm very happy to do. I'd build her a china hutch if that's what she wanted. Anyway, as much as I love walnut that's more than I have room to store, especially since I'm military and good 'ole uncle Sam could have me pick up and move at any time. I'm considering keeping some of the wood and selling the rest but I have a nagging voice in the…

    • 8 replies
    • 3.8k views
  25. Started by emccrory,

    My wife has requested that I make for her a tea service tray out of wood. Seems like something that could be really pretty. Her idea is to have a thin bottom and raised sides; the side made of a maple-walnut-maple sandwich. Does that make sense, or do I need to draw a picture? I'm guessing it needs to be about 30 inches by 16 inches (rectangular, probably, but oval-y would be cool) and be able to lift at least 2 pounds (of tea, crumpets and porcelain). But I am having trouble conceptualizing the bottom of the tray. My intuition is that plywood will be ugly and that real wood will be pretty (-er). But how does one get a large, thin piece of hardwood? Joining …

      • Like
    • 12 replies
    • 5.5k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.