Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by Frank Speyerer,

    Is 1/4" baltic birch plywoon exactly 1/4" thick?

    • 2 replies
    • 3.4k views
  2. Started by NiNler,

    Hello all, I recently found some extremely splated red maple for a great deal. It was near that line between amazing and unusable...not sure which side since it had some massive checking along the some of the spalt and I could readily see areas that were obviously punky. But I got suckered into the best spalting show I've ever seen and was given a deal so I took the board. I made some hand mirrors with part of the board and stabilized anything and everything I could see with epoxy. I then started to finish with poly. I put three coats on over four days (#0000 steel wool in between) and then got distracted for a week. I had planned on a couple more coats to e…

    • 5 replies
    • 4.8k views
  3. Started by ChetlovesMer,

    Okay, I have access to a metric ton of 4/4 (actually it's a little better than 4/4, but that's another story) Black Walnut. It is all air dried (for only one year, which means I don't think its ready to use yet). Anyhoo, I'm thinking of a bedroom set for the most beautiful woman in the world (My wife). She's been hinting about it for quite a while. I can get as much as I want for $6/bf. That's not a great deal here, but it's slightly better than my local Woodsmith store at $7.99/bf. There's a mill about 65 miles from here where I can get it for about 50 cents cheaper a board foot, but it would be fresh cut and I'd have to dry it. So, I'm curious, wh…

      • Like
    • 27 replies
    • 11.6k views
  4. Started by MaidensGator,

    My neighbor about 3 houses away sent out an e-mail to our community e-mail list yesterday that said he's moving and had some lumber he wanted to sell, mainly cypress and oak, with some maple and walnut. He said he wanted to sell it as one lot, not break it down, so make an offer. My wife saw the message within an hour of him posting it and I called him up and went over to look at it. It looked like quite a bit of cypress and oak, rough sawn, but some boards 8 to 10 feet long, 1-1/2 inches thick, and 6 to ten inches wide. Some of the boards are only about 4 to 6 feet long, but same width and thickness. I told him I wanted it, but didn't know how much to offer, what di…

    • 9 replies
    • 3.9k views
  5. Started by sapele steve,

    I just purchased a Guitar kit & the body is made out of Paulownia wood. I did some research on the wood & it is a hard wood which is apparently good for making musical instruments. My question is does anyone know how to finish this type of wood? The standard for Guitar finishes is obviously Laquer but I'm not sure how this would look on this wood. Any info would be appreciated....Thanks, Steve

  6. Started by Eric.,

    Hey guys, a large hackberry tree fell over in my dad's backyard. I'm getting ready to go cut it up, mostly for firewood, but there are a few sections that are large enough to mill some lumber from if it's worth it. The little bit of research I did suggests that it is suitable for furniture, but I thought I'd find out if you guys had any first-hand experience with this wood before I spent the time milling it. Appearance, workability, uses, etc. Thanks guys!

    • 3 replies
    • 4.1k views
  7. Started by duckkisser,

    where can i find the price of all kinds of wood that is up to date. i just bought a stack of spalted maple some ash and some hickory for 100 dollers. one board is 3 in thick 6 inches wide and 7 feet long a quarter log is 6 inches thick x6 inches wide 8 ft long(think i can get 5-8 big boards and a few small ones)(30 dollers) 1 thick x 8inches wide x 8ftlong 1.5 thick x 3 wide x 3.6ft long 1.5 thick x 4 wide x 4.7ft long 1.25 thick x 5 inches wide x 8 ft long(60 dollers since they were partialy plained down) he gave me 3 oak boards .25 thick x 6 inches wide x 8ft long (free) 1.5 inches thick x 12inchest wide x 4 feet long ash 1.5 inchest thick x 12 inc…

    • 4 replies
    • 9.7k views
  8. Started by Everett,

    Any hardwood species that are naturally green in color? Getting bored of the colors fir cutting boards

      • Like
    • 5 replies
    • 5.5k views
  9. Started by Geymonatjuan,

    Hi I have a few 1" diameter chestnut branch pieces ( bark included) that were part of some custom chairs. I would like to straighten them up to reuse in another application. They are 16" long. I'd never done something like this and I appreciate any advice I might get

    • 2 replies
    • 3.3k views
  10. Started by duckkisser,

    i was just given some tiger wood floor boards left over from a house what does everyone think of it and how well does it keep its form and coloring?

    • 2 replies
    • 3.2k views
  11. Started by duckkisser,

    i was wondering if flame box alder is a very soft or hard wood?"think its related to maple" does it tend to split? does it keep it flame coloring after it dries out or over time? is it good for hand or machine tools? can it be cut into boards as i have only seen it as turning blanks? does it warp easily? and what are you general feelings about the wood. please give me your good and bad experiences working with it. thinking of cuting it into small 1/4 strips to make the inside edge on cherry picture frames for christmass

    • 7 replies
    • 5.1k views
  12. Started by lighthearted,

    I hate working with Cedar--the smell while cutting kills me. I have a lot of outside projects that I want to use cedar for. Does anyone else have this problem? i don't think it's an allergy.

    • 4 replies
    • 3.6k views
  13. I’m planing on cross-cutting a single narrow maple board into multiple pieces and glue them side by side to make a wider piece and I plan on using a handplane to to a final smoothing. After my maple workbench flattening I’d really like to learn what not to do in terms of alternating grain pattern ! Here is a poorly drawn picture of what I'm seeing in terms of grain pattern. If I look at the edge of the board the grain looks like what I've drawn, diagonal lines, you'll see this sometimes when you have cathedral patterns on the face but in this case I have none. If I were handplaning this I'd want to plane in the direction I drew the arrow. Is that correct? Now if …

    • 8 replies
    • 7k views
  14. ok i made a pencil holder that looks prity cool ill post in on critique later(looks like a wood jap lanturn) but for some reason when i put poly on it the end grain of one side is far darker then the other side of the end grain. could it be that one side was closer to the end of the board and it was thirstier? any way to fix this i would like to have a maple board with uniform color on all 4 sides and now i have only uniform on 3 sides.

    • 7 replies
    • 3.7k views
  15. Hello Folks, So, in my backyard, there are 3 Locust trees that my wife wants gone. I thought at first that Locust wasn't really usefull in woodworking, but with a little research, and seeing this from PME: I'm excited now! I'm hoping that I will be able to take them down and put the wood to some use. According to a lot of people online, the wood is very rot resistant, so maybe some outdoor furniture as well. Now the question is, are they honeylocust trees or blacklocust trees? I know the pods of the blacklocust are toxic to humans, and i don't feel like finding out that way, lol. I've attached some pics. Anything anyone knows about the tree and/or the lumb…

    • 10 replies
    • 5.8k views
  16. Started by simeond,

    So I just bought a house with a barn in the back (the shop is coming together nicely...). The previous owner was a wood turner (made really interesting lamps primarily). There is a LOT of odds & ends wood in the barn - mostly smaller "chunks" for turning and plenty of full rounds with bark which he had waxed the ends of and labeled (both species and year). I discovered in the upstairs of the barn about 8 6/4 9'x9" boards of an unknown wood. They were really rough-cut and initially I thought they were cherry. Upon planing, they were definately not cherry, I was thinking plum. I then discovered two smaller cylindrical pieces which he had labeled "plum" which matche…

    • 6 replies
    • 3.5k views
  17. Super excited went to the box lumber store to buy a .49 cent thimb screw and spent 70 dollers. I usualy avoid the rows of lumber at menards and lowes becase i will spend all day shifting through the wood to buy one board.But today i said what the heck and made a beeline for the lumber rows. And right on top was 7 fantastinc boards from same tree. Every once in a while ill see a board with tiny pin size knot holes all over it creating speckling and marbling. But low and behold there was 7 and on top of that they were covered in blue sworrels from the blue pine beatle. Im so excited that i cant stand the fact that i have to let them aclimate to the shop and completly dry…

    • 9 replies
    • 4.9k views
  18. Started by duckkisser,

    Any one ever had a board that was tramatized with some kind of sickness and the lumber ended being real cool looking. Thats what i bought looks like i have a pine board with hundreds of individual burls all over the board. Dont think i can plain those areas as they are a little soft need large sander to thin them out.

    • 0 replies
    • 3k views
  19. Started by Rutabagared,

    I posted in the Declining Lumber Quality thread about buying green lumber direct from the sawmill and drying it yourself for big savings, and I wanted to follow-up since I just received a load of green lumber about a week ago. Below is about 400bdft of 4/4 and 60bdft of 8/4 cherry. I got this delivered and stacked as you see it for just over $600. All of it is FAS. Green lumber prices are down due to the unfortunate state of the housing market. This will amount to about three kiln charges (solar kiln). If things go well, all will be dried to a workable state by fall. (Solar kiln drying is pretty much nonexistent during the fall and winter in PA.). I foun…

    • 4 replies
    • 3.6k views
  20. Started by sbarton22,

    Can someone help me understand a little bit more the properties of ash? I am making an assembly table with long adjustable runners as feet. I thought it would be cool to try to shape them to give it more visual interest and, at the same time, start to make a complex curves. So, I but out the plane and spokeshave and off I go. The runners are a sandwich of ash, cherry, and maple, making racing stripe, if you will, with ash being the outer sides (say 2" on either side) of a 5" wide runner. Ash seemed very hard in the lumberyard, so I thought it would be a great choice to take abuse as the trim and various edge parts of shop furniture. So, most of the shaping was t…

    • 6 replies
    • 4k views
  21. Started by ChetlovesMer,

    I've recently heard about thermally modified wood (TMW). Has anyone tried any? Do you know where to get it? Just curious.

    • 4 replies
    • 3.6k views
  22. Started by bois,

    I just recently started milling up some butternut for an upcoming project. I saved a bunch of money by going up to NH where lumber is less expensive (and tax free), plus I sorted through the "shorts" bin to shave even more cost off. I was fairly proud of myself until I actually started the milling process. I intentionally bought 8/4 stock so that I could resaw and bookmatch for the wider panels on a chest of drawers. However, when I split the first board in half on the band saw, I noticed the two sides almost popped apart as the blade reached the end of the cut. And sure enough, the two resawn halfs don't mate up any more, as there is a massive bow between the two si…

  23. Started by sbarton22,

    I just landed a sweet piece of maple burl. I'm so excited to do something with it. Now, with that said, I don't really know how to approach it. Can I run it through the planer? Which way is uphill or downhill? Should I treat it more like end grain? Any advice here would be greatly appreciated.

    • 11 replies
    • 10.4k views
  24. Started by jasonjarrard,

    got my trees back from the sawmill today. cut down some pines off of my farm, to siding a new cattle barn, had 60 planks 22 1/2 inches wide and a whole lot more around 20. man you can siding a barn pretty quick like that.

    • 1 reply
    • 3.2k views
  25. I've been given the bole of a 9" diameter mesquite tree. Should I just paint the ends, or should I do that and cut it in two lengthwise to dry? I live in Boulder City, NV , e.g. hot and very dry ( would you believe 4% RH somtimes?). I'd like to use it to cut ~ 1/8" thick flitches for veneering. I've already found out with some smaller pieces that it is tough to get consistent flitches. I watched one three inch diameter branch yield several inches of straight cut, a bow to the left for a few inches and a bow to the right for a few more as I attempted to cut a straight line through a curve in the branch and a major knot.

    • 5 replies
    • 11.1k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.