The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
Absolutely new to this forum, but impressed with the knowledge. I've some maple that was kiln dried 14 years ago. It has been outside, but completely under cover since. I live in Northwest Arkansas where we have moderate to high humidity in the summer. Within reason, will the maple remain dry or is it time for another trip through my (soon to be) solar kiln? Thanks, Jim
-
-
- 22 replies
- 3.7k views
-
-
Hello ' My name is Dutch. I'm from Live Oak,Florida and tinker with wood projects in my home shop. I was reading an article on the uses of Live Oak on the Internet which brought me to this site. Since signing in I cannot find the article I was earlier reading on Live Oak wood so started this new one. In the article members were discussing the merits of working with Live Oak and one mentioned the US Constitution "Ol' Iron Sides" had Live Oak planking on the exterior to repel enemy cannon ball. While another replied he could not find Live Oak wood on the market. Here in north Florida Live Oak are numerous and I have about 4 acres of them growing on my acreage but find it …
-
- 9 replies
- 3k views
-
-
I took a trip this morning with my gf to check out the current selection of wood for my upcoming projects. Next project is a tv stand for my parents and the base is going to be all oak with my modified version of the shaker bench base as the finish. I added a photo of the finish sample. Top will be natural cherry. I sourced some nice 8/4 boards, as I plan to resaw a wide cherry board and book match for the top. More on that later as that project comes closer and the design is all worked out. I was also eyeballing the cherry for my bench top. They had an impressive selection of 8/4 and 12/4. I talked to the guy and am waiting to hear back on exactly what species it is so I…
-
-
- 39 replies
- 7.3k views
-
-
I need some additional width on another piece of Bubinga. Would you risk rip-cutting through the center of this overgrowth (if that's what it is) and jointing it to another piece?
-
- 6 replies
- 3.1k views
-
-
Sometimes, at least. These pieces of walnut are the lintels for a small Japanese gate (torii) I'm building. It'll be indoors, so I'm not worried about damage from insects or the elements. Anyway, I was listening to the latest WTO, and thinking that, while i wouldn't want an all-sapwood board, it can occasionally be useful.
-
-
- 10 replies
- 4k views
-
-
http://www.ebay.com/itm/271371202396?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
-
-
- 10 replies
- 2.8k views
-
-
My friend has an oak slab that his grandfather cut with a chainsaw. It's approximately 2' x 3' x 6". We don't have the tools to do anything with it (too wide and thick), and he'd like to get two 3ish" thick slabs if possible. Anyone know of a place in the St. Louis area that could resaw it? I tried Hibdon Hardwoods, and they said they don't do that, and they referred me to Fehlig Brothers. I've emailed them but not gotten a response. Thanks.
-
-
- 21 replies
- 5.6k views
-
-
My wood guy gave me a stack of beech. there are probably 10 boards that are 12-14" wide and rough sawn to 4/4. there's some checking on the ends so there will be some waste there. the boards are about 7' long. i was originally going to use it for a bench top, but now im second guessing that plan. what would you do with it?
-
-
- 24 replies
- 4.5k views
-
-
Marc, Matt, and Shannon I would be nice if you dedicated one of your shows to buying lumber. I consider myself a green newbie and think myself and others could benefit from your wisdom. Do you need to know some covert language to get a good deal at a lumber yard? How do you find lumber yards that sell #1 and #2 Common Hardwoods? Do you need a business license to get a good deal? Do you have to buy xxx hundred of board feet to get a good deal? I live in North Tampa, and we have a pretty good dealer intercitylumber.com but they say they don't carry common hardwood lumber only FAS. Any ideas to find ones that do? When buying plywood do you purchase …
-
-
- 28 replies
- 7.1k views
-
-
I've had a nice piece of 4/4 cherry sitting in the shop for the past two months waiting to be made into a six-pack holder for a christmas gift. I finally got around to it this past weekend, cut up the four sides and milled them and left them flat on my bench for a few days while I futzed around making a box joint jig. Lo and behold, the longer two pieces (only 11") have a noticeable cup when laid flat - I think it's minor enough to still work, but it makes me think I'm doing something wrong. What's the best practice for keeping things stable? Should I be rough cutting the pieces and letting them sit before milling them? Cutting joinery ASAP after milling? Crossin…
-
-
- 13 replies
- 7.6k views
-
-
A while back, I purchased a load of air-dried lumber from a local sawyer. Included were several feet of red oak. I asked if he had any 8/4 stock, since all I saw was 4/4. He found one board of 8/4 oak, which he gave me for free, as it was badly warped and split on the end. I have started building an accent table, and there was enough good stock in that thick piece to get the legs. It is beautiful, quarter sawn, with abundant ray fleck. This leads me to the question - does red oak exhibit much ray fleck? I don't recall seeing this much ever before, which leads me to suspect this is white oak. Also, the pores don't seem to be 'open' like they are in the obvious red oak I …
-
-
- 10 replies
- 3.8k views
-
-
-
First post here and I'm a noobie, so be gentle... I live in Kodiak Alaska where the only wood I have access to is oak ($9+ bf from the store), maple ($13+ bf), 1 x X cedar, or green cut Sitka spruce from a local sawmill. The Spruce is $.90 bf or $2 bf for clear. The problem is that it's all really green. Since Kodiak is an island we get a lot of wet weather and very moderate temps (lows in the 20's in the winter and highs in the 60's in the summer with 80" of rain in the year). Our humidity today was 93% and about 35 degrees all day. The regular cut wood has a lot of knots in it and the sawmill just leaves them in piles (not stickered) outside. He keeps the …
-
- 5 replies
- 4.4k views
-
-
If anyone is interested- http://www.realantiquewood.com
-
- 1 reply
- 2.5k views
-
-
I am starting the holy quest of bench wood decision. After looking at scores of pictures one thing I have noticed is that every bench I have seen uses a light colored wood. Has anyone made a bench out of walnut or any other dark colored wood? Is there a good reason why workbenches have stuck to light colored woods? I could see the choice for light colored woods on an assembly bench but you are likely not working with small parts on your workbench.
-
-
- 52 replies
- 13.4k views
-
-
Anyone in the Green Bay area know of a source for either QS 4/4 or flat sawn 8/4 green oak? Red or white would be fine. Thanks!
-
-
- 8 replies
- 2.9k views
-
-
I am making a pizza peel and using curly maple. I am having a hard time jointing the edge. I have a spiral head cutter jointer and stanley #4. I have tried both and still getting tearout. Any help would be great.
-
- 9 replies
- 4.7k views
-
-
So I just picked up a job building some custom oak end tables. Client knows what she wants, had pictures, dimensions, no problem.. Then she asked me if I could build her a toilet topper, and wants it to match her existing vanity, this is a problem... As you can see in the picture, the door is just a slab of particle core (Ikea?) with v-grooves to resemble a frame and panel style door. I've never constructed doors like this and am wondering if you fine folks have any good ideas, or have ever run up against it before? I'm going to try some experiments this weekend v-grooving some oak particle core ( sorry router bits), perhaps try veneered ply as well. Any thoughts on how …
-
-
- 15 replies
- 4.1k views
-
-
Novice here making shop furniture out of softwood to learn woodworking skills before moving on to hardwood. So far the shop cabinets I am making are turning out well except I am experiencing a lot of tear out during many steps of the build despite being careful and taking precautions along the way. The wood is "white wood", the cheapest construction lumber you can buy at Lowes. Purchased the cheap stuff not only because this is a practice project, but also because they are only shop cabinets. Is construction lumber particularly splintery and hard to work, or is the tear out just a sign of my inexperienced hands? Trying to figure out if I need to learn more skill…
-
-
- 11 replies
- 4.8k views
-
-
After my last trip to the mill, where I bought 150 brd feet of 8/4 rough cut maple, I found that 2 of the boards were beautiful curly maple. I am surprised that the people there did not notice and make me pay premium price for these boards. So my question, is there actually a way to tell the board is going to be curly maple before it is planed? Thanks, -- PAB
-
-
- 13 replies
- 5.8k views
-
-
The question came up in the last Wood Talk Online about scrap wood. Obviously, you can make shims, plugs, wedges and whatnot out of your scrap wood, but I'm curious if anyone's done anything cool project-wise with your cutoffs and scraps. Lately, I've been making some simple coat hooks/hangers out of random crap from eBay and scrap wood (and most of the ideas shamelessly stolen from etsy/pinterest. These are jatoba, black locust, jatoba, and the last 2 are black walnut. My wife found a book of plans for wooden toys at a library book sale, so I've got that too... but I slowly accumulate bits of pieces of wood that are perfectly good, and occasionally very …
-
-
- 24 replies
- 8.8k views
-
-
A family friend asked if I could help with a quick and easy surprise for her mom. They have one of those cutting boards that fits into the the face frame of a cabinet right above a typical drawer. The one they have has been through the test of time of about 15-20 years and three kids. Nothing special. Just a sheet of plywood with a oak lip on the front. Is plywood a typical medium for this application? I have seen these cutting boards, but never looked at what it was made of. I can't imagine solid wood would work too well since it needs to stay flat, even when slightly damp, to fit back into the slot it came from.
-
-
- 4 replies
- 2.4k views
-
-
are there any adverse effects or things to consider when milling lumber in 30 degree (F) weather?
-
-
- 15 replies
- 5.3k views
-
-
I have a client asking about oak flooring. Flat sawn is 25% less than quarter- and rift-sawn. I gave him my basic woodworkers take on stability as well as ray fleck aesthetics. But I do not have any experience with flooring. We live with 65 year old oak floors which look like combo of rift, flat and quarter sawn. Other than the termites liking it, it seems stable and well-wearing. With flooring secured in place perhaps propensity to cup, bow, twist is well restrained. But for long-term I am not sure adhesives and fasteners should have to fight nature. Any thoughts and/or experiences? Thanks much tom
-
- 8 replies
- 3.2k views
-
-
My son had bunk beds made if pine when he was little. We stowed them in the attic for years and recently got them down. They are much darker than before. So does wood get darker because of age or because of being in a hot attic? Or both?
-
-
- 9 replies
- 9.4k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·