The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
I always watch the inventory at woodworkerssource and bellforestproducts.com I often order my really rare stock ( padauk zebrawood rosewood ) tempted so much on this deal. Thoughts ? http://www.woodworkerssource.com/PRO-sap4410-p-wood_of_the_month_exotic.html
-
- 2 replies
- 2.3k views
-
-
Hi Gang, I've been quietly following along since about March (2014). I have a question about some interesting wood I reclaimed and wonder if anyone can help in identification. Background: 14 years ago my boss told me to "get rid" of a wooden sculpture of a Ram. I think it was her mother's, presumably purchased quite some time before. It was about 2.5 to 3 feet long and about 18" to 2' tall at the top of its head. I kept it in my house for several years and finally a few years ago stuck it outside under a bush (in Jackson, WY). This spring I pulled it indoors, let it dry a couple of months, and cut it up with a chainsaw to produce pieces I could resaw (6" capabi…
-
- 4 replies
- 2.5k views
-
-
I'm being offered a felled cork tree... I know the bark is no good for furniture but don't know about the rest of the wood... It's an oak species but couldn't find any info on it, what do you guys think?
-
- 8 replies
- 7.7k views
- 1 follower
-
-
Hello Everybody, Really basic question here. My wife wants me to build here an ottoman for our family room. She is planning on covering the entire thing except the legs with upholstery fabric so it seems to be a good candidate for MDF or plywood. The ottoman will be about 3' X 3' X 1'. I've not done anything with upholstery before so I'm a little unsure of how to proceed. is there anything special that I need to be ware of? Can I just build the box out of ¾" ply or should I build a wood frame and add a thinner layer of sheet goods over the frame? Any help would be greatly appreciated.
-
- 5 replies
- 7.1k views
-
-
I have some scrap wood around and need a mallet, so voila. only question I have is which wood. I have some hard maple that's 3/4" thick so I'd have to laminate it together to make it thick enough, and even then it'll only be about 1.5" thick, not sure that's enough. I "might" have enough to laminate 3 pieces to make it 2.25" which I know is thick enough, but is that strong enough? I also have some 4/4 walnut that would be thicker but I"m not so sure it'd be hard enough. I know the maple is hard enough just don't know if it'll be thick enough. as for the walnut, the opposite. silly Q i know but you guys know more than I do so, there it is. muchas gracias in advance of…
-
-
- 49 replies
- 8.3k views
-
-
Good evening everyone... I was listening to talk radio today.... scanning AM radio during my travels and stumbled on some random conversations about construction materials. They were taking callers, talking about rafters and proper ventilation of a building... all very boring to me but then one caller was talking about pallet wood and home projects. This caller warned the listeners that wooden pallets are now being sprayed with pesticides, and other chemicals to disinfect and make sterile. Any comments? if this is true I would warn anyone using pallet wood.
-
-
- 16 replies
- 4.3k views
-
-
We have been discussing on another post that I did a glue up with yellow pine that have padauk inlays and after 7 hours or so, the glue still wasn't dry. We kicked around the glue possibly having broken down and one suggestion that was also plausible was that padauk is an oily wood and has to first be cleaned with something like denatured alcohol. What do you know about this and are there other oily woods to watch out for when gluing?
-
-
- 7 replies
- 7.1k views
-
-
Im looking for some weathered barn wood for various projects (platform bed, built in dresser / vanity and other) If you have found a good source for these types of projects, please let me know. Thanks! Nick
-
-
- 6 replies
- 3k views
-
-
These conversations have always fascinated me. Wolves help trees. Sometimes it is not just the logger who hurts the forest.
-
-
- 1 reply
- 2.2k views
- 1 follower
-
-
I went to the.lumber yard and picked up a 4x8 3/4 sheet of shop grade maple. It was mdf core to save money over the veneer $55 and $70 I was curious about the runners ... Can I use this plywood on the runners too? I just didn't want to spend $20+ on the plastic ones. I watched Marks video on making one and I am going to follow those steps. I will take some pics along the way to show my progress and get thoughts and help. I am sure I will need lots of that haha. Any tips starting out I should think about before I start making cuts? Sent from my old phone using Tapatalk
-
-
- 66 replies
- 10.6k views
-
-
I bought a small half-round of olive wood the other day because it looked so pretty I couldn’t let it sit in the store any longer. It’s a bit of a gamble, though, as the wood is checked some (which you’d expect) and also has some hairline cracks in it (that I didn’t expect). I realize that wood will do as it wants in the long run, I’m just hoping to get just enough breathing room to get it turned into something. It’s about 1-1.5% higher in moisture content than things that have been in my shop for more than a year, so it has very little drying left to do. However, I’m afraid those hairline cracks might get larger and I lose the whole piece of wood. My original intent ha…
-
- 2 replies
- 2.4k views
-
-
So I just picked up several good size logs from an Oak tree recently cut down (past 2 days), and I am not sure if I should let them dry out completely BEFORE I start cutting them down to planks, or if it is okay as they are? My projects are to make several Rhino puzzle figures on the scroll saw. They will be used at the local youth group as something to play around with when they arrive every night. I am new to woodworking other than wood carving, so I figured I would ask the more experienced and knowledgeable crowd. Thank you for the help! Mike Nunez
-
-
- 6 replies
- 2.7k views
-
-
ok, so new question that has popped into my head. Lets say I have a 4/4 board and am wanting it to be 1/4 or 2/4 or whatever. Can you use the table saw for this operation? I was thinking, turn it on the side raise the table saw blade to get halfway through it, if it is somewhat tall and then just run it once on each side to split it? ... yes I realize bigger boards would be out of the question since the table saw blade is limited in height. I was just curious for a 3-4" or 6" board for example.
-
-
- 19 replies
- 4.8k views
-
-
There was a great big old elm tree behind my family's home that was hit by dutch elm years ago and died probably 20 years ago. Over the years it's dropped all of its bark and most of the smaller limbs, but due to the size and safe distance from the house, it was never taken down. This past spring, the tree came down and within the last couple weeks, my dad started chopping it up. His plan was to just cart it off for outdoor firewood, but since there's already several years worth of junky poplar already split and stacked, I'm wondering if I or someone with more experience could do anything with what's left. The base of the trunk was pretty much turned to dust by termites, …
-
- 10 replies
- 2.8k views
-
-
I know I've seen somewhere about wetting a piece of wood and putting it in the sun and you can straighten it that way. Has anyone heard of this?
-
-
- 20 replies
- 27k views
-
-
This plywood was at home depot and marked as Sande ply. normally, the sande ply i see is a very blonde, almost maple-like wood. so when i saw this, i wasn't sure what kind of wood it was. anyone have any ideas about this stuff? the tag said it was a product of ecuador.
-
-
- 3 replies
- 3.8k views
-
-
How long do you let boards acclimate in your shops from the lumber yard before you start your projects?
-
-
- 5 replies
- 2.9k views
-
-
I bought a large walnut slab. It's about 2.25 - 2.5 inches thick & kiln dried. It came skip planed, so it is fairly flat. It is too big to fit in any of my saws or planers. The grain is so gnarly & beautiful, I'm wondering if I can have it cut into 2 slabs on a bandsaw mill (like having it re-sawn). My concern is that due to the kiln drying, cutting it will release a huge amount of internal stress & warp both pieces. Would you consider having it re-sawn or just use it full size. I'm planning on making a coffee table with it. Thanks!
-
-
- 9 replies
- 3.1k views
-
-
Started building a bar out of red oak today. It's looking good but I hate the smell of some of the boards. Kinda reminds me of a sweaty unwashed backside. So what kinds of wood do you detest the smell of?
-
-
- 22 replies
- 5.1k views
-
-
I have been looking around the net and i cant find anyone who has intentionally saturated their lumber. I am planning on soaking my lumber in an ebonizing solution to turn the entire board solid black. If anyone know how long a board needs to be in vinegar to soak in all the way to the middle please let me know. Or if you know of a web site or person who might know it will save me months of testing. Also does vinegar go bad or does the solution of steel wool and vinegar lose its intensity. I plan on takeing a large plastic container and cover both cherry and walnut with a mixture of steel wool and vinegar. (I tried this with small pieces in a jar and they turned blac…
-
- 7 replies
- 20.4k views
-
-
With "help ID this wood" posts fairly common, other than the I.D. Wood app for iOS, does anyone know of an app that can take a picture (or multiple pictures) of lumber and then either identify it or at least suggest a few possibilities to help narrow it down? I've got a ton of lumber scraps of various lengths and I'd love to be able to figure out which are pine, poplar, maple, or cherry. Anyone know of anything?
-
-
- 14 replies
- 3.6k views
- 1 follower
-
-
Hi everyone, I just got my hands on this piece of wood but I have what species it is... I got it from an old milling that closed some years ago, it worked mostly with imported wood (to Portugal that is!). The wood has been sitting outdoors since then. The board is 245x50x1600mm in dimensions, and very heavy! Any idea of what it might be?
-
-
- 10 replies
- 3k views
- 1 follower
-
-
I've been on the lookout for a nice slab for either a long coffee table, or book matched slabs for a dining room table, and I am often taken aback by the pricing. It honestly seems to be completely arbitrary, even when the slabs aren't exceptionally wide. I'd be thrilled to find someone that just sold slabs by the BF, but the hardwood dealers seems to attribute an extra 50-300% in my area. The only sawmill that I've ever bought from doesn't really have a selection of slabs, and what they had the last time I was there was all red oak which doesn't float my boat. What's your experience?
-
-
- 18 replies
- 4.2k views
-
-
I've just lined a closet with some tongue and groove cedar from Lowes . Packaged in four ft. lengths , very pretty pink color. Now I would like to trim the corners out but can't find any long lengths of that pretty pink colored cedar that I can mill to use as trim. Any suggestions??
-
-
- 7 replies
- 2.5k views
-
-
Hello guys, any ideas what this is that's eating up my walnut lumber, and/or what to do about it? Thanks in advance for any input. Cheers pw
-
-
- 7 replies
- 3.2k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·