The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
I'm working with some Mahogany for the Greene and Greene inspired Blanket Chest Guild build and a couple of my 4/4 pieces I'll be (hopefully) using in the side panels have some slight twist to them. I can put a little weight with my hands on the ends and flatten the boards out. I've also done a dry clamp up and without much effort can get everything flat and flush across the three pieces in the panel. I'm going to be using my Domino to align and join the boards at glue up but I was curious if you guys had any input or thought I should be concerned with the twist. If it was really drastic I wouldn't even bother, but it doesn't appear to be that bad.
-
- 6 replies
- 2.9k views
-
-
Went down to the wilds of PA last week to visit my friend Mark Peet who is a bit of a wood scientist, a bit of an urban sawyer, and avid collector of wood samples. He loaned me another set of samples from his collection for me to take home and process, which is what I was expecting when I went down there to return the last batch he loaned me. As I was leaving he surprised me with 3 boxes of wood that I didn't even have time to look at since he was pressed for time and was politely shooing me out. When I got home I was like a kid in a candy store. I thought it was going to be mostly domestics but right away I was seeing such native PA woods as Brazilian tulipwood, Indone…
-
- 16 replies
- 2.8k views
- 1 follower
-
-
-
It's extremely frustrating. I live the capital city of my state (charleston wv) and I can't find good plywood. I'm not even talking about cabinet grade walnut veneer....I'm talking about Baltic birch for jigs and such. I just want something consistent, flat, and stable. Sadly, it's outta the question here. Everywhere I call acts like I'm speaking a foreign language, "well I got some plywood, but it ain't that Baltic stuff u said. It's good pine. U can sheet a roof with it so you know it's flat." Frustrating!!!
-
-
- 31 replies
- 10.4k views
-
-
I get most of my wood from local sawyers but some species I have to hit a hardwood dealer. 5+ years ago local lumber dealers counted 5 1/2" boards as 6" and 7 1/4" boards as 8". Visiting 2 different dealers in the past week it looks like they now measure exact widths which is good for the buyers. Is this something that has changed over the years or maybe just my local dealers staying competitive with each other?
-
-
- 19 replies
- 3.5k views
-
-
Just a question of curiosity. I am located in the San Francisco bay area. The lumber yard that I buy from sells all S3S and S2S. Recently I purchased a bunch of 4/4 Red Oak for $3.90 a board foot and some 8/4 Cherry for $5.50 a board foot. The down side to this lumber yard is they don't sell anything small like something that turners would use to make pens or bowls or other small items. Most of their stock is 8 to 10 ft. Not to far from this lumber yard is another lumber yard that sells nothing but S4S that at most might need some light sanding. This is a great place for the people that don't have the tool set up to be able to buy from the other lumber yard. And …
-
-
- 11 replies
- 3k views
-
-
I'm doing the ground work for building plywood boxes (cabinetry and bookcases). I'm was intending to use rabbits for the joinery... However this just caught my eye...maybe this is the way to go. It's labeled a finger joint, but not what I would typically call a finger joint (I'm new, what do I know?). Just wondering what other people use...is there a consensus on what joint is best for my application.
-
-
- 22 replies
- 129k views
-
-
I'm considering building a stand alone bench for inside my master bath shower. I guess that teak would be a good choice but am open to other suggestions. I guess I'm also looking for advice about shape/style, species of teak, glue/epoxy, joint types, fasteners, etc. I should consider. I admit that I don't know what I don't know so please feel free to educate me Thanks Chris I've spent the last week read hundreds of posts in these forums and the depth of experience and the awesome attitude I see in all of you is encouraging me!
-
-
- 5 replies
- 2.7k views
-
-
My co-worker is the biggest Washington Redskins fan (what is he thinking) and he also happens to be a really good cook. I was thinking of making him a Redskins themed cutting board with a burgundy (or as close to it) colored wood, a with a gold colored wood inlay that says Redskins or perhaps just their R really big on the board. These are the colors they use, I know there's the whole Officially Licensed by NFL thing, however it's not being sold, and is a fan piece that I'm making as a gift. My question is what woods would really fit the color scheme and still be food safe? I was thinking for the yellow, maybe going with Canary Wood for the gold color.
-
-
- 27 replies
- 6.8k views
-
-
There is a person looking to sell 100 bf of Peruvian walnut 6/4 for $600. Pics attached. I am looking to see if anyone wants to split the haul in half? All boards are 6/4, planed to 1.5" thick, and about 5 feet long. The width of the boards varies from 15" to 6", but mostly 8--9" wide. The lot contains about 100 BF total
-
- 11 replies
- 2.6k views
-
-
So, I wish I knew the first thing about what to google for what my specific question entails but I don't so please forgive me (it's not for lack of trying!). I have a question pertaining to wood as it ages in the elements and if there is a way to.. possibly speed up the effect. This is hard to do without any pictures so I will do my best to explain it in thorough detail- The last trip I went to Disneyland in SoCal, I was in line on the Jungle Cruise (this context is a little important- close proximity to the water) and I was noticing that all of the hand rails were made of solid wood which had aged in such a way both through natural aging and from millions of people r…
-
-
- 11 replies
- 3.4k views
-
-
Greetings all! My father, an accomplished artist, was kind enough to present my wife and me with a beautiful Christmas gift. It is a pencil drawing that features our son. Anyway, my wife has asked me to make a frame for it. I am asking you guys and gals for opinions on the design and materials choice. Our idea is to do the frame AND the 'mat' from wood. I have some lovely walnut fir the frame, but still haven't decided on a profile. To make the 'mat', I plan to resaw some poplar and plane it to about 1/8". The poplar will be bleached and/or stained to achieve a moderately light gray 'driftwood' color, without emphasizing the grain. I would also like to use a sub-ma…
-
- 8 replies
- 2.5k views
-
-
I know maloof and others have made cherry rockers but it seems to be a much softer material than standard oak. Would you use cherry for a rocker ? It would be a mortise and tenon construction rocker similar to the last one I made.
-
- 3 replies
- 2.4k views
-
-
FYI: http://www.laboiteverte.fr/quel-bois-utiliser-pour-quel-projet/bois-projet-type-essence/ I am not the author, just thought this could interest people. -- PAB
-
- 7 replies
- 2.8k views
-
-
I'm cleaning up my shop after 100+ hours in the shop over the last few weeks. I've rounded up the majority of cutoffs and put them in a large box. I foresee a lot of projects with contrasting splines.
-
-
- 8 replies
- 2.6k views
-
-
Late last year when I was pretty sure I wouldn't be getting any more batches of samples for the site, my friend David Clark in Australia decided to do a book on rosewoods and had about 3 dozen rosewood samples sent to me and while he was ordering them, he also picked up a couple dozen more samples of other woods. Then my friend Mark Peet down in PA got in a big new batch for his collection and let me pick the ones that I wanted to process for the site. So ... three nice batches with about 100 samples total. I'm particularly happy to get the rosewoods 'cause the samples are expensive and I buy VERY few of those on my own. These have all been processed now and most …
-
- 8 replies
- 2.6k views
- 1 follower
-
-
so on my recent first trip to Rockler in Pasadena I ended up walking up and down just about every row just to see what they offered. When I came to the veneer section I was absolutely blown away by how expensive more sheets of veneer is. they had numerous assortments of nice looking veneer in the 30 to 50 dollar price.. For example a pack of 4 pieces of 1/42nd of an inch lace wood veneer each one square foot was fetching $42.00. I walked over to the lumber racks and found a for a board foot section of lacewood for $46. I understand cutting veneer has a cost associated with it but the yield of veneer from a single tree is much higher that the yield of cutting four quarter …
-
-
- 4 replies
- 2.5k views
-
-
Hi all, I am constructing a conductor stand that will be in an orchestra pit to allow the conductor to see both the cast and orchestra. I have a few other threads here as well regarding the same project so feel free to reference them if you need more information. I will attach a picture or two of the final design to show you what it looks like. The question lays it out for you. I have finished the design, but have one thing left. I have to decide on what type of wood to use. I'm by no means an expert on wood, I don't know the terminology/grading system too well so please keep that in mind. Aside from holding itself up, the stand will need to hold the conductor, o…
-
-
- 11 replies
- 2.9k views
-
-
Just like the other recent poster, I also am fairly new, at least to furniture making. I too have a couple of bowed pieces, though I haven't tried to edge glue them... Yet. But I have 5 boards that will make up a table top. I have quarter sawn oak that is 4 1/2 wide x 46 and a couple of boards have a cup with a gap of about 1/4" at the worst. The wood is still 7/8" thick so I have a little help in that I need to plane them down to 3/4. The table top that these will make up will have breadboard ends and I'm considering using dowel joints to aid in the edge gluing. I'm just afraid that even with these helps of planing and dowels and breadboard ends, I'll still have tro…
-
- 13 replies
- 3.5k views
-
-
Hi folks, I would classify myself as a beginner woodworker although I have been tinkering for several years. My goal for 2015 is to build all new living room furniture in the mission style. Have picked out my plans for the projects and have decided to build them all out of cherry. I have all the tools to do my own milling, but I have never done it before. I purchased all new blades/cutters for my saws, jointer and planer and have tuned them up the best I can. Should I purchase rough cut lumber (S2S at varied lengths and widths) and mill it myself, or go ahead and purchases S4S (more consistent sizing) from the hardwood distributor? The price for 4/4 FAS cherry is $3.…
-
-
- 16 replies
- 6.4k views
-
-
All this talk lately on a work bench has got me thinking ... I see a ton of maple benches but why? Yes it's good hard wood that's not too terribly expensive. It looks decent as well. However, going off my pricing here in Texas I was thinking of possibly changing it up some. Here is my pricing: Now going off that list I started looking at pricing and the janka hardness scale here: Pecan and sapele are harder than maple. Yes mahogany seems to be a lot softer and not the best idea ... But it's the point I am going after of different woods. Now that got me to thinking. Why do I not hear much about possibly pecan or sapele being used for work benches? Sure the …
-
-
- 17 replies
- 5.6k views
-
-
Just got done doing a cherry chop for my crisscross roubo, and I've ended up with approximately 6 remaining feet of 9" wide, 12/4 cherry. It wasn't cheap, so I'd like to come up with something that will benefit from the width. I've got some end tables to build, I'm probably doing to do a pair of morris chairs (could go White Oak or Cherry i guess) but what else is out there that benefits from that much width and thickness? I hate the idea of just re-sawing into 5/4... Morgan
-
-
- 6 replies
- 2.8k views
-
-
So being in southern California, there is a lot around but very few options for hardwood not ridiculously marked up. My last walnut project, I paid about $8.50/bf for 8/4 lumber about an hour and a half drive away. I did some Google searching and found a Sawyer in my city and had a long chat with him today on the phone. He started that he has 8/4 air dried walnut up to 6 foot long he would take $5/bf for. I'm trying to build a stock up so that I don't have to go buy wood for every project. This sounds like a pretty good deal to me, a novice. Anything I should look out for or know about air dried from a mill vs kiln from a big yard?
-
-
- 13 replies
- 3.5k views
-
-
I just threw a free" thrown in the deal" piece of walnut from my haul yesterday through the drum sander. . The colors that showed up are just. .. wow. My shop is really dark right now because it's raining but I'll snap some good pics later.
-
-
- 13 replies
- 2.8k views
- 1 follower
-
-
OK, I'm a newbie to the forum. I am trying to get a wood shop set up in the garage and want to laminate some boards together (think Roubo). I found this Oregon Ash at a good price. After driving 60 miles to get it, I could have kicked myself. All of it was bowed to one extent or another. No cupping or other funky movement. The wood is 8/4 Oregon Ash, 8' long and 6" wide. It has been air drying for a little over a year and its current moisture content (as taken with a Harbor Freight moisture meter, so plus or minus…) is a pretty consistent 11%. There are a total of eight boards. The worst bow is a 1 in. rise off the ground over the eight foot length. The smallest bow i…
-
-
- 4 replies
- 7.3k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·