Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by tcarswell,

    What kind of cherry defect or funky grain is this ?? Found this locally . What on earth is with that lacey grain ? I know it's cherry it has gum pockets etc. But I've never seen it like this.

  2. Started by Normallife,

    Hello! First, I'll apologize if this question is a little too beginner... but I'm hoping you folks can help give me some advice. I'm looking into the materials to build my first major project: built in cabinets and shelves for my living room. I've been watching quite a few YouTube videos on the subject and it seems to be commonly accepted that 3/4" Birch Plywood is a good material for this type of project. (Mine will be painted white when finished). Here's the question: what is the difference between a box store's offering and a specialty store's products when it comes to something like Birch Plywood? I'm here in Columbus, OH. As I research around my ar…

    • 7 replies
    • 2.9k views
  3. Started by davewyo,

    I thought it would be fun to see what kind of wood you're holding. First is my Mother Lode. ">http:// All 4/4 Top to Bottom, Left to Right: Maybe 10BF of Hard Maple on the top shelf. 10-20 BF Mahogany Flame Birch 3 hand-picked from Bell Forest....Chechen, Lacewood, and Katalox for decorative boxes Then maybe 20 BF of Walnut and finally some Curly (Red) Maple four 6' Walnut boards I have for a cabinet project in the works ">http:// A bunch of barnwood siding which was purchased but rejected on a re-siding an old barn project ">http:// Ply ">http://http://s722.photobucket.com/user/davewyo/media/IMG_0868_zps3cqsmydx.jpg.html'>

      • Like
    • 75 replies
    • 15.7k views
  4. Started by jab73180,

    My fellow Mainers, where are you getting your rough and sheet goods from? I have found a couple places but they seem high.

  5. Started by wnaziri,

    I would like to get input from the community on an issue. I recently purchased 80 bf of 4/4 cypress at an auction. It is beautiful, plain sawn cypress. I am currently in the middle of completing a chest of drawers, using air-dried walnut. The piece has two drawers on the bottom with three enclosed shelves on the top half. I had planned to use popler or maple for the secondary wood / drawer sides for contrast. Now that I have seen my new cypress lumber, I would like to use it for the drawer sides. I realize that cypress is pretty soft but rather stable. Question: any reservations / issues with use of cypress for indoor furniture? Thanks, in advance.…

  6. Started by Keggers,

    I have a barn that sits about 60 yards from my shop that I've stored wood in over the years. I seldom go out to the barn but decieded to go look last week to see what I could find. I found these two pieces of super curly walnut. It looks like they were sawn sequentially. I forgot that I had a stack of this stuff that I bought several years ago from a man getting a divorce. Guess I'd better be brining it into the shop to take better care of it.

      • Like
    • 25 replies
    • 5.3k views
  7. Started by Brendon_t,

    There are some freshly cut logs by me on CL from a 70 year old tree. The wood seems to have a nice red heart wood and lighter sap wood. I read one Gargle article saying it was very hard and stable. I wouldn't mind picking up a log or two and cutting up tp use but would like to hear if anybody has had any success with it. The thing I fear reading that it is extremely dense is that it would be like hickory and destroy the cutting edge of everything it touches.

    • 4 replies
    • 2.2k views
  8. Started by hdtech,

    this is my first post on this forum. I recently had the time and opportunity to mill up a lot I collected about a year ago. most of the wood was in good shape except a lot of these small black holes made by some kinda bug. I've never seen these before. so my question would be is what are they and what to look for to spot future problem logs before wasting time killing them.

      • Like
    • 10 replies
    • 2.5k views
  9. Started by harley3348,

    Hello! I am just a beginner and thought I would try to build a pair of Adirondack chairs. I have a pile of shadow box fence 5/16 " stock, Is that too thin for this type of chair? Also..Anyone have any plans for a curved back Adirondack chair? Any help would be greatly appreciated. Thanks, Harley

      • Like
    • 16 replies
    • 3.7k views
  10. Started by Janello,

    I got to know some guys pictured here that own a business Natures Fell. I donate my time for them, helping them mill wood, stack, fix equipment or whatever they need in return for an occasional select slab of wood. Here they are using the Alaskan saw mill on 1 of 3 sticks of walnut they acquired. This is the smaller of the 3. The base of the trunk from this tree still needs to be milled and is over 5 foot in diameter.

    • 4 replies
    • 2.2k views
  11. Started by Joshua Luther,

    Here is my first try at hand cutting dovetails. Something just doesn't look right. Can't place my finger on what it is. [emoji15] Proverbs‬ ‭16‬:‭20‬

      • Like
    • 12 replies
    • 4.1k views
  12. Started by davewyo,

    I know it's sort of a craps shoot, but I wonder if anyone recognizes this type of wood. I was camping in Southeastern Utah when I found an interesting piece of firewood left beside a fire ring in North Wash, just north of Lake Powell, near Hite Marina. It was mixed in with a few other sticks of cottonwood, which is the usual lumber cut/sold for firewood in the desert southwest (along with pinon pine and juniper). There are also a lot of invasive "Russian Olive" and "Tamarisk" (Salt Cedar) which grow along stream banks in the area, but the bark doesn't look like either. It could have come from the Navaho Nation in northern Arizona or somebody may have brought it fro…

  13. Started by RPCV_Woodworker,

    Hey All, So there is a shade structure that was torn down at my work. I was using some of the scrap, and saw that some pieced have great grain and color. It smells strongly of spices, primarily cinnamon, when sawn. Anyone have an idea what I've got? I'm based in Senegal, West Africa, for geographical reference...

  14. Started by Milo,

    I was just curious if anyone spaltted their own wood. If so, how much do you do at a time? Do you have a soil "formula" for success? What woods have you succeeded with? I have some hard maple I was considering trying this on. Thanks, milo

  15. In fact, I've NEVER seen anything like it. My friend David Clark, author of Timber in Australia in Colour (he's Australian and can't spell), often travels to China and occasionally sends me pics of some of the wood things he sees there. This is a picture of him and a bubinga trunk from Cameroon that has roots growing inside the trunk. David is over 6 feet tall, so as you can see, that's a LOT of growth with the roots inside, although pretty clearly they had not touched the ground for many years before the tree was cut.

  16. i know the main board is different from everywhere else. but what about the legs? is there veneer?

  17. Started by bikefoolery,

    Does anyone have experience working with Blue Gum Eucalyptus (Eucalyptus Globulus)? - Does it go by other common names? - Experience drying it in a solar kiln? - Working with the material? (Sawing? Routing?) - finishing (seems pretty oily)? - or resources to read? There is a stand that will be felled in my back yard. These tree are large (100ft tall, 2-4ft diameter trunks) On the west coast in California, USA it was deemed "commercially non-viable" long ago, but some times that just means there's quite a bit of waste, or takes too much time to deal with. There could have been advances is drying techniques since then. Well, I can deal with "takes time" …

  18. Started by Brendon_t,

    XYZ lumber in BFE America has chosen you as the grand prize winner for their lifetime of wood drawing. They will supply you with as much of whatever wood you choose for life. You can only choose one wood and your selection is locked in for life. What do you choose? Personally, I choose walnut. I know it's not the prettiest wood that exists, I know it is not extremely expensive, but for me, walnut is one wood that I never tire of working with. Building with. Finishing. I think an initial order of 1,000 bf 4/4 and 400 8/4 should get me going.

      • Like
    • 37 replies
    • 6.1k views
  19. Good morning folks! This question is mostly for the local Phoenix folks, (Marc too!) I've been designing a large 4-poster canopy type bed in my head for quite a long time now... Finally was close enough on finalising the design to put it to paper, and now am collecting the lumber and hardware needed to build it. My first build will be using construction lumber, as it's cheap, and once I'm sure that it's design is what I really want, and figure out my little tweeks and such, I'll build a new one with hardwoods, and a buddy has requested this first one, so it won't go to waste. I stopped and picked up 4x4's, 2x6's and 2x8's at Home Depot yesterday, and for some reason…

    • 3 replies
    • 2.4k views
  20. I have been working through a bit of walnut the last month and a half, and am noticing a few attributes that I have not run into before. First off, this is my first batch of steamed walnut, so I am not sure if what I am experiencing is specific to the supplier or to the process. I have gone through 300bf of 8/4 #1 common walnut, and it has really been a semi-crappy experience. One, the wood seems much more brittle and flaky at times than all the non-steamed kiln dried walnut that I have worked with in the past. Second, as I cut into the wood, the face of the board will be fine, but the edges of some boards have a ton of fractures running through the board. They are like 1…

  21. Started by Mackle,

    Last time I visited my uncle he had a giant stack of logs from a tree he felled that he claims is some type of walnut. He was using them as firewood (blasphemy, I know). After I saw the color split I convinced him to let me have a few. I got a second opinion from a friend with a tree removal business who claims its some sort of maple. What do you guys think?

    • 13 replies
    • 3.2k views
  22. Started by pghmyn,

    I'm really looking at this as a good deal for a small stockpile for myself to use. It's my favorite species, and it's not too much where it would be a burden for space. Even at $1.50/BF it is cheaper than S&B hard maple 4/4 at my hardwood dealer. I could see a few nice tables, and possibly a new chest of drawers. http://wausau.craigslist.org/mat/4923340631.html

    • 9 replies
    • 3.2k views
  23. I am relocating from Maryland to Tallahassee. Here, I have a nice hardwood supplier near home and a great sawmill/lumber supplier and hour away in Pennsylvania. The close by dealer has nice stock and is very helpful. The sawmill has lots of small pieces that are faced on two or more sides and are at good prices, which is great because I don't need big pieces for my dulcimer hobby/business and I can hand pick especially nice pieces. I will probably be heading back north to visit family once or twice a year and can shop for lumber on those trips, but I am going to miss having these businesses close by to home. Can anyone point me toward good hardwood suppliers pr…

    • 5 replies
    • 2.4k views
  24. Started by duckkisser,

    So I have a chance to buy air dried skip planed 4/4 quarter sawn sycamore for what seems like a good price. What is a good price for it if I'm buying it from the mill?

    • 3 replies
    • 2.5k views
  25. Started by Brendon_t,

    When I bought my house years ago there was a fallen tree on it. I cut the branches to use as firewood and have been doing so for quite some time. I got curious and ran one small 6" diameter piece through the band saw. It looks like ash to me but I'm about an idiot when it comes to wood ID. My next door neighbor has an ash tree that stands over a hundred feet on his property so I wonder if this could be also.

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.