The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
Anyone ever heard of such a thing? I was cutting up this tree today, and spotted some inkiness in the end grain. So I slabbed off the side of a log, and voila! I'm quite certain it is in fact hackberry, and I'm absolutely positive it is NOT maple. So is this actually spalt, and has anyone ever seen it in a wood other than maple? I thought it was just a maple thing?
-
- 17 replies
- 7.3k views
- 1 follower
-
-
Saw this ad on Craigslist. Looks like a decent amount of wood for the price. Never heard of anyone refer to mahogany as "vintage" http://washingtondc.craigslist.org/nva/mat/5094571218.html
-
-
- 6 replies
- 2.3k views
-
-
I recently had a client request a counter similar to this look. I have done numerous patterns before, but I haven't done such a subtle difference in stripes before. Also worries me a bit that this piece was stained in two batches(assuming with the DIY tag) to attain such a uniform color for each stripe. I don't like staining countertops, because I have seen numerous examples of them wearing like crap. I also generally try to avoid staining. What species could I use to achieve a similar look without staining? American walnut seems like the obvious choice for the darker stripe. I haven't worked with many different species, so my knowledge is a bit lacking to make the best c…
-
- 3 replies
- 2.8k views
-
-
Many posts and plans mention hardwood for a miter runner or some other use. My question is where do folks get this hardwood? And what are the dimensions available? I'm used to the big box store and all I can find in any dimensions is knotty pine. Anyone buying flooring or are there other sources I'm not aware of?
-
-
- 23 replies
- 4.1k views
-
-
-
hey everyone, A friend of mine just had a baby and I thought it would be neat to make her a baby rattle. Too give you an idea on the design, think sucker on a stick.. I have a left over piece of maple baseball bat stock I picked up from Rockler a while back. The stock is about 2 1/2" round. I was thinking about cutting two pieces about 3/4" thick off the end. Then using a 2" fostner bit to hollow both pieces out and glue the two pieces together (after filling it with the noise making material). My question is, is using the bat stock a good idea? The main surface area is going to be end grain. will it look nice, break when if hollow it out, hold up with out breaki…
-
-
- 21 replies
- 3.9k views
-
-
Hi all- haven't been able to find much on this topic. Marine grade plywood is expensive- in most cases the cost of shipping just one sheet is about 2-3 times the cost of the sheet itself, making ordering a specific thickness very costly. Nearby, I've been able to find 3/4" marine, but i need 1/2". Has anyone ever tried planing the ply down to 3/8" (or any reduced thickness) and then water-proof gluing a new face veneer on the thinned ply to get a thinner sheet overall? I want to give it a try, but would like to learn from others' experiences/past mistakes beforehand. If you haven't worked with marine ply in the past, the lowest grades are still almost $90 a shee…
-
-
- 7 replies
- 3.7k views
-
-
I have a queen Palm that has a trunk height of about 16' that I'm going to take down. Is this true wood and is it worth salvaging?
-
-
- 6 replies
- 3.6k views
- 1 follower
-
-
My cousin sends me a text. The wood fairy is on the way to your house. I'm building a vanity for his bathroom remodel. 5 sheets of walnut ply, but here we go....
-
-
- 14 replies
- 3.1k views
-
-
Was given some of this by my father-in-law, he said it was cherry. Some friends said it wasn't. I've never worked with cherry so I'm not sure. It was much darker before I planed it.
-
- 10 replies
- 2.7k views
- 1 follower
-
-
I have read very little about root wood except from whittlers. This punky stump I dug out of a planting bed was likely arbor vitae or yew. I just got curious how deep the punk ran as it was not rotting in the pattern of above grade wood. As I ran my jack across it, I could see appealing patterns. I know embedded rock might be a concern, but a root slab might have appealing figure. Is it stable? Gravity places stresses on above grade branches, what about soil supported branches? Would crotches have less internal stress? The smaller volume of root material might limit the scale to small boxes and I doubt there would be any practicality behind the pursuit. I am simply curiou…
-
-
- 8 replies
- 3.4k views
-
-
I'm looking to get some holly so I'm looking for someone in the south eastern United states who would be willing to look around for a holly tree that they can cut. I don't have a project in mind I just don't want to pay the huge amount of money they want for the small pieces. If anyone is interested perhaps we can do a lumber swap I'm sure I could find some local lumber like hedge Apple, crab appe or I have some small pieces of lilac.
-
-
- 48 replies
- 7k views
-
-
Looking to try something new for my new soon to be office. I can't afford ebony so I am going to dye black. It is going to be something like below so I was curious what wood would be the best for this type of project? I was thinking oak since its on the cheaper priced wood. What else?
-
-
- 18 replies
- 24.1k views
-
-
Looking for recommendations for lumber yards in Southern California. Wife and I are going to be down there this weekend, and I'm looking for a lumber yard or two to visit while we're down there. We will be in the Orange/Newport Beach areas, so I'm planning on hitting up Rockler and Woodcraft as well as Austin Hardwood and Hardware. I'd like to find a place that has a good variety of woods, especially exotics. And of course they'd have to be open on Saturday at least or possibly sunday. Any recommendations?
-
-
- 12 replies
- 6.1k views
-
-
This looks to be the best bench type style for me at the moment since a roubo is just too much money at the moment with the new house. It looks like they have 2 pieces laid flat across for the top... Will this be easy to keep flat or is it going to be a nightmare with the wood movement? Also would some basic maple be a top contender for this?
-
-
- 5 replies
- 5.5k views
-
-
So I am currently building 7 kitchen drawers (3 of which are large pot drawers) and elected to go with solid maple. I decided that I would go soft maple, as the selection at my dealer was better in the soft than hard maple (and the price was about half). Anyways, while working it for the first time, I noticed some inconsistency. Some boards are quite dense and heavy, while others are quite light. Some are very much like hard maple (white, heavy) while others are much more like brown maple. Others are reminiscent of poplars density, and I had to do a double take more than once to ensure that I didn't grab a stick of poplar by mistake. Any "maple-ites" out there she…
-
-
- 5 replies
- 2.9k views
-
-
We recently had some work done to the house, and I salvaged 6 - 6"x6"x7' fir beams/posts. I still have a bowling alley slab and was thinking a table may be best usage of the materials. Only issue is where to use that table? Outside dining table is only option, and the wife would love to do that. IF I go that route, how good/bad is this idea? And what about finish? Should I be thinking spar varnish or some other type of marine safe finish? Would only smart thing to do is build a thick film finish to keep this baby protected? I know this isn't exactly ideal placement for this type of build, but I'd like to take advantage of the materials at hand. Thanks for the help!
-
- 4 replies
- 5k views
-
-
Here are some photos of the latest find from my stack in the barn. As soon as the yard dries out some - if it ever does - I'll bring in some more of this beautiful wood to work up. This is air dried walnut that might have seen a kiln. I just can't remember if the man I bought it from had it kiln dried.
-
-
- 15 replies
- 3.6k views
-
-
http://philadelphia.craigslist.org/mad/4999963786.html What do you guys think? I was thinking about taking a ride tomorrow to check it out.
-
- 14 replies
- 2.8k views
-
-
A few weeks ago I cut down a ten year old rose of sharon bush and was astonished at how WHITE the wood was. I took a short piece from the root flare and set it out to dry just to see what would happen. It split rather badly. Since its from the root flare I'm not too surprised at the split because the wood grew in several directions. So i'm hoping the rest of the "trunk" will dry without splitting so bad. Even though the piece is small in diameter I thought it might be good for string inlay or something. Has anyone here had experience with this kind of wood? Don Butler
-
- 6 replies
- 10.7k views
-
-
When we put the new shop* in, we have to take out two trees. My wife (via her best friend who's a professional gardener with the National Trust in England) believes the trees are locusts (robinia is was the expert has called 'em). I check it out on Wikipedia - leaves and bark sure seem to be a match. How do you judge whether you should hire a sawyer and turn it into lumber? Or is just destined to be firewood? The trees are pretty big - I seem to recall reading that you should measure the diameter at chest height... they're 62" and 48". Any advice appreciated. Best, Matt
-
-
- 11 replies
- 3k views
- 1 follower
-
-
I work with reclaimed woods for furniture. Mostly pine, occasionally oak and poplar. This is 100 year old construction lumber and barnwood. I am looking for help on how to dry lumber. i build tables and am new to it and have had an issue with shrinkage in my table tops. i would like input on the proper way to dry pine to 6%-8% mc to avoid shrinkage while not twisting warping all of my stock. i am trying to keep the old school milling saw marks in tact visually. How long should i be drying heart pine, at what temp etc
-
- 1 reply
- 2.2k views
-
-
Showed up on Spokane Craigslist. Grabbed a screen capture in case it vanished. Sent from my iPhone using Tapatalk
-
-
- 10 replies
- 2.8k views
-
-
Every time I go to Kiem lumber I think I should buy this. But I just can't bring myself to pay that much.The piece is 9" by 32" and 6/4. It is really a nice shade of green. Seems really heavy for all the bigger it is. Anybody ever worked any? oh it is Lignam Vitae Green and $399.99
-
-
- 7 replies
- 2.8k views
-
-
I want to do a Nakashima-design table, with his classic live edge detail at the two long edges, and the spaced bowtie straight-line center, all bookmatched. See the pics, attached, for what we have in mind. I can get thick slabs from a local source, but I don't want to have to remove all that wood to get down to my finished thickness target of 1-1/4". My source saws and dries at thicknesses in the 10- to 14-quarter range. Seeing an article in which a guy did one of these by ripping, resawing, jointing, planing, regluing, etc., I thought I might try it too. I don't own the big equipment needed to do the work, but can pay a local shop to do it for me. What pr…
-
-
- 3 replies
- 2.9k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·