The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
Can anybody give me info on how a simple panel would look with Ash rails and styles with a Baltic Birch plywood center? Or, is there a Nother combination of plywood that can be used well with Ash when you were staining it?
-
- 3 replies
- 3.1k views
-
-
I heard of this alleged case of the illegal cutting of maple trees on public lands in Washington. According to the article; "The textured wood known as “figured maple” found in some big leaf maple trees is prized by woodworkers. Writing the court, Assistant U.S. Attorney Seth Wilkinson said blocks of some patterns – “flame maple” and “quilt maple” – sell for hundreds of dollars."
-
-
- 8 replies
- 2.9k views
-
-
Hey guys, I'm new to woodworking and I just bought a lot of wood that I need help identifying. 90% of the wood was unlabeled, the few that where labeled were ash, maple, walnut, butternut, cherry and cedar. Ive taken a few pics of a few pieces any help is appreciated, I will post more pics as I pull more out. The last pic is everything I brought home stacked/leaning in my shed. If anyone is near me and would like to stop by for a few beers and help ID them is person that would be great, I'm in upstate NY.
-
- 4 replies
- 2.7k views
-
-
For those that have access, anyone want to take a guess as to what type of wood is used on the piece on page 22?
-
-
- 12 replies
- 2.9k views
-
-
Hi everyone new to woodworking in general and I'm about to make a purchase from a reputable wood dealer close to me. Little information on what I'm doing. I've started a table and have the legs and frame completed but cheaped out and bought dimensional lumber from a big box and have been nothing but frustrated with it. No matter how I organize the boards for the top I'm looking at about a quarter inch plus of twist in about a 50" span and really have no way of taking this out. I contacted the yard today and my order for white pine furniture grade surfaced on both sides and ripped one edge straight will be about 2.30bf. I asked if the surfacing will take out any twists in …
-
-
- 5 replies
- 2.5k views
-
-
Project: 48" round table with 3 x 9" leaves - This equals a glued-up slab of 49+ inches wide, 75+ inches long, grain running the short way. Assuming 1" boards, what sort of guestimation do you guys make when ordering the wood? This works out to 25 BF cut to size ... is there a rule of thumb? Does it matter that I can't use anything under 4'?
-
-
- 29 replies
- 5.6k views
-
-
So I went to a lumber yard near my office to look for a piece of wood to make a tree swing seat, and to peruse a whole new world of wood that HD doesn't carry. This was my first time seeing all the different woods you all talk about here in the forum. That feeling like a kid in a candy store..... Anyway I found a piece of cypress that I really liked and wouldn't have to make any cuts. Just round it over and finish it with something. I came across a box of cut-offs with some cool looking wood so I grabbed what I liked without thinking of what I would do with it. It was 10 bucks...why not try something other than 2x4's and plywood?? I thought about a jewelry box but my w…
-
-
- 9 replies
- 3k views
-
-
I blame Tom Cancelleri...after all the deals he's been finding at his Woodcraft I had to go take a gander at mine. Blah. Garbage. Nothing but garbage. Clearly marked...NO discounts on Festool or Leigh!...the two things I might be interested in. But they did have plenty of garbage on clearance. Oh, and no Danish oil...the one thing I actually needed. But I wandered back into their junk area...er, uh, make that "lumber" room, and I spotted this basketball-sized alien brain. Picked it up...whoa, heavy. Not domestic, whatever it was. Flipped it over...dark, reddish. Honestly, no idea. I thought maybe bubinga. Went t…
-
-
- 29 replies
- 5.8k views
-
-
Hiya folks. I've been spending a lot of time just sitting and staring at this project. For as unremarkable as this table is, as bad the shape is, it's likely not a candidate for repair/restore. That being said it's an important family piece so I'm going to do it anyway. I've been pondering the wood species of the various parts and I have some pics here that hopefully show a lot of the detail. There's far too many and they are too big to post here so here they are up on a Google image album: https://picasaweb.google.com/111807419907392952307/DiningroomTableTop?authuser=0&authkey=Gv1sRgCL6l5oryvPT2Bg&feat=directlink It seems to me, and I received one…
-
-
- 23 replies
- 3.3k views
-
-
Got some wood in for an upcoming build, laid it out on the outfeed table to get an idea of where I wanted to make my cuts. I figured it out, and began to break down the material. Material... just a word we toss around to mean what ever wood we're using at the moment. I'm as guilty as anyone else here, but I design a piece, get the wood, process it and start putting the thing together... Most of us appreciate nice grain patterns, but I really get a lot of joy in seeing such a rough board before processing. Anything can be underneath the surface, perhaps a hidden flaw or spectacular grain or color. A few swipes with the smoother reveals a different story than is being t…
-
-
- 12 replies
- 2.5k views
-
-
Well I knew it would happen eventually. After a dive last night, loading my gear into the truck, I felt a big crack in my spear gun. Today upon further inspection, the teak laminations are beginning to delaminate. Time to build a new stock. As with many marine applications, teak is the go to wood but recently, i have seen a few very high dollar ipe and padeuk stocks on the market. I have a bunch of padeuk on hand and am thinking of giving it a go. Any reason not to?
-
- 3 replies
- 3.3k views
-
-
I was at a sawyer friends house this morning helping him section and cut an 11000 lb oak log. We took a break and I walked through the dring stacks and saw this beautiful wood. It is yellow in color, very dense with close tight pores. anybody ever worked with this stuff?
-
-
- 12 replies
- 4.2k views
-
-
There are several lumber yards in my area. The one closest to my house is a small-time operation that only has a solar kiln for drying their wood, while the others use the big industrial oven-style kilns. They all dry the wood to the regionally appropriate 7-9% moisture content. Does anyone know if there is a measurable difference in quality between kiln drying methods, or is it simply enough that it was dried in a kiln of some sort?
-
-
- 13 replies
- 4.6k views
-
-
Last week, hanging with a buddy, he had some customers come over and pick up some ash planks that I remember him milling just a few months ago. I asked him why he was selling it already before it was dried. He smiled and told me it was dried already. Calling BS as it hadn't even been 3 months yet, he grabbed a 6/4 stick, cut about a foot off and handed me his moisture meter. 11%. Not believing it I grabbed mine, 10%. How is that possible without a kiln? The tree was a landscape cut down. Living when felled. Sat for 30 days in the yard then cut. Each stack is stickered and stacked under this thick white plastic siding looking stuff.
-
-
- 9 replies
- 2.8k views
-
-
Has anyone used Black locust for coffee tables or end tables? Thinking of making a bedroom set out of the locust.
-
-
- 6 replies
- 2.9k views
-
-
Just curious as to what might be a good contrasting wood for curly redwood. I've been working on a coffee table made out of a slab or redwood and was wondering what might be a good contrasting wood to make the legs and skirt out of. need help!
-
-
- 8 replies
- 3.6k views
- 1 follower
-
-
How do you know which species each wood is? I have a lot of different kinds of wood laying around but have no idea how to tell. Is there some sort of guide you can point me to?
-
-
- 9 replies
- 2.4k views
- 1 follower
-
-
I bought these 2 kinds of wood quite a while back. I think once is maple and the other ash. Can you help me? Sent from my SM-N910V using Tapatalk
-
- 5 replies
- 2.5k views
- 1 follower
-
-
Hi folks, I picked up a beautiful plank of quarter sawn twisted maple. I don't want to change the color, but I'd like to really get those details to leap out of the wood and get a nice sheen on the wood. This will be my first finishing work, so I'm turning to your expert opinions. I was thinking of hitting it with a coat of linseed oil and then hitting it with a couple applications of shellac. So what do you think? Should I go with a different scheme?
-
-
- 25 replies
- 6.2k views
-
-
I have an opportunity to buy some 8/4 Spanish cedar. The boards are between 10" and 16" wide and 12 feet long. The asking price is $1.45 bf. I'm not at all familiar with Spanish cedar and was wondering if anyone has used it and if it's a wood that woodworkers like to work with. There is approximately 500 bf available. I have not seen this lumber and really don't konw what grade it will be. I know it is kiln dried and that's all. According to what Bell Forrest is selling their 8/4 Spanish cedar for - it's a bargain at $1.45 bf. I'm not wanting to get a bunch of this stuff if there is no demand for it. Any help or opinions is appreciated. Kent
-
-
- 7 replies
- 2.6k views
-
-
I was picking up some finish at Woodcraft and they had a giant 5'x5' box full of 'exotic cutoffs' for $3 a pound. Most of it looked like cracked pieces and long thin edge strips that were presumably removed in their s3s process. Others were large bowl blanks with severe cracks. A few guys were picking through some of the crayola lumber, and I found this unassuming hunk of 10/4ish wood. Some figure just about caught my eye in the right light. Paid $3ish. Here it is with a little solvent rubbed on. The photo does it no justice - lots of depth in the figure. Any idea of species? A kind of Sandalwood maybe?
-
-
- 9 replies
- 3k views
-
-
hey guys. My uncle gave me some boards from a tree he cut down a few months back. He claims it's Poplar but it doesn't look like it to me. Can anybody help me here? I'm posting a few photos of the boards and a piece I made from one
-
-
- 20 replies
- 4.8k views
- 1 follower
-
-
I'm currently working on a gift box made of Bocote. The wood data base indicates that gluing is usually not problematic. I am okay with that, and I was going to use TiteBond III, but while cutting the miters I feel like there may be some level of "oily-ness" beyond other exotics I have used (specifically katalox and chechen, and some thin inlays of Paduak, Purpleheart, Yellowheart, and Wenge). From your experience with Bocote, does it glue up with no problems? I have mitered corners and I will be putting "keys" into the box for reinforcement. If you think epoxy would be wise: For such a small project can I use an immediately available Devcon 20 min. epoxy or i…
-
-
- 13 replies
- 7.3k views
-
-
It seems like historically, European beech was a very popular bench material. Even today, a lot of high end magazine order benches are beech. Any reason it's not more popular with diy bench builders? Here in southern California, 8/4 is readily available and a bit cheaper than hard maple. Plus it smells amazing
-
- 10 replies
- 3.1k views
-
-
I'm just looking a getting idea of what kind of wood this is. Thanks Dustin Cookson
-
-
- 18 replies
- 3.7k views
- 1 follower
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·