Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by nerdbot,

    Hi guys, I'm in the planning phase of my first workbench build, and I'm trying to decide what wood to use for the top, which will then help me decide what to use for the rest of the bench. I'm planning on building the Guild's roubo bench, and I know both BenchCrafted and Marc recommend soft maple. But, the wood I work with most often (volume and frequency) is cherry, and occasionally maple and walnut. I do work with exotics on nearly every project, but it's more to add accents (like trim, edge banding, etc). Would soft maple still be a good choice for the top? I've looked at the Janka hardness numbers and I see that soft maple, depending on the species, is pretty cl…

      • Like
    • 60 replies
    • 10.6k views
  2. Started by Lee Bussy,

    Imported ... as in I had to order this from North Carolina (I live in Kansas City, MO) to get QSWO. This is no doubt going to be unimpressive for a lot of folks, but I'm pretty happy with what the folks sent out. That figuring is pretty common through all the boards. It will look nice I think - it's for a tabletop.: Them trees were not too big were they? Yield is 95% removing the sapwood, none of the ends are checked. All but one board is straight although a couple are slightly cupped. they all should finish to my needed 3/4" with no issues. It looks like I may have a match with 5 - 9, 3 & 4, and 1 & 2.. The rest is not actually that far off color-wise, t…

      • Like
    • 17 replies
    • 3.5k views
  3. Hi All - Next up in my project queue is to make a new dining table to replace the IKEA-special that's there now. The table will measure almost 4'x8'. So, the question: The wife is asking looking at those pottery barn inspired dark espresso colors. So, we've settled on General Finishes Java gel stain. I'm debating what I should construct the table out of. Obviously, the grain and figure of the wood will be largely hidden under the dark color. Given that, what would you all recommend? I was thinking of hard maple for durability but it might be tough to get such a dark color in a light wood like that. Doesn't make any sense to use something expensive like walnut or ma…

  4. Started by Eric.,

    That time of the month again. Today I brought home about 130 bf of red maple. A little more than half of it is wide, bright white, lightly figured ten foot boards. The other less-than-half was this heavily figured juicy deliciousness. No idea what the pictured pile will become but I do have plans for the lightly figured stuff...entertainment "cabinet" for the basement when it's finished. So...never.

      • Like
    • 29 replies
    • 5.8k views
  5. Started by Enclosed spaces,

    cutting up a 3x6 plank of Spalted holly for boxes. Found this . Those fungus sure create some neat patterns.

      • Like
    • 16 replies
    • 3.6k views
  6. Started by Adelg88,

    What's up guys I live in nashville. I'm looking for some people who also live around here. I need advice on where yall get wood. I've gone to a local shop called good wood, it's mostly re claim or live edge slab. Does anybody have more local places that would sell some more exotic wood variety? I've asked around locally without luck. Thanks

      • Like
    • 4 replies
    • 2.2k views
  7. Started by Tom King,

    My guess would be Maple, but interesting anyway. https://plus.google.com/u/0/110958733824086718994/posts/Zja9fYubLdh?pid=6224177845081594242&oid=110958733824086718994

    • 4 replies
    • 2.5k views
  8. Started by namluke,

    Hi, im looking to make a planter for the front of my house, can someone let me know what the best type of wood and finish i should use? Many Thanks Luke

  9. Started by Gunther15,

    I am working on some cutting boards for Christmas gifts. I am trying to find a good accent wood to use. I am getting all of my lumber from my firewood pile as well. I have made a sawmill jig for my table saw to cut dementioned lumber. I currently have enough stock of hard maple and hickory, but am looking for a species to use as an accent color. Lately I have been looking at the Osage orange (called hedge where I live) thinking that it would add some nice color. Do anyone have experience with this wood? Some forums say that it is toxic and should not be used others say that it works great for cutting boards. Any help would be appreciated!

    • 8 replies
    • 4.7k views
  10. I'd like to acquire lumber that originated in Liberia, Western Africa, as a special future project for my father who's a part time missionary aid worker to Liberia. Liberia is tough to work with due to trade issues that are still lingering from trade restrictions. I'm willing to do the work required to get it, however, I have no clue where to find the source of lumber. Anyone have experience in this?

      • Like
    • 5 replies
    • 2.3k views
  11. Started by cdolcourt,

    Hi All, As I just posted in the project showcase, I have some chess pieces that were handcarved in Africa. That project is located at http://www.woodtalkonline.com/topic/20540-chessboard-shadowbox/ I'd love some help identifying the woods used. As best I can guess, the black pieces are ebony, as they are very dense (though one of the bishops is a different, much lighter species). The white pieces...I have no idea. Here are some photos. I can certainly take others. Thanks for any advice you can provide.

    • 2 replies
    • 2.7k views
  12. Started by Eric.,

    I find myself using The Wood Database more and more often. It's a fantastic resource. I stumbled across this article this morning and found it extremely useful in breaking down the mahogany confusion in a simple, logical way. It confirmed a few things I thought I knew and taught me a few things I didn't. Recommended reading... http://www.wood-database.com/wood-articles/mahogany-mixups-the-lowdown/

      • Like
    • 10 replies
    • 3.5k views
  13. Started by phinds,

    Eric Meier, who runs The Wood Database web site has now published a really good wood book, called "Wood! Identifying and Using Hundreds of Woods Worldwide". It’s better than most of the other reference books I have. The introductory chapters about wood structure, etc, are REALLY good. He’s clearly put a lot of time, research, and thought into this and it shows. No book with just introductory chapters on wood characteristics will ever rival Hoadley’s “Understanding Wood”, but Eric's is better than most such sets of introductory chapters and it might be the best around. I haven’t read enough detail yet to be sure. Another bit of good news is that he covers a lot of woods. …

  14. Started by phinds,

    The bottom of this page tells the story http://hobbithouseinc.com/personal/woodpics/_anatomy/growth rings/_growth rings.htm

  15. Started by sophiasieber,

    My father in-law has been bringing in truckloads of scraps that he got free from the lumber yard, to burn in the fireplace. I looked at the stack the other day and noticed they all had the tiny perforations that are visible in pressure treated lumber. My partner and I brought up the concern that we (and our two year old) are breathing toxic fumes when we visit and a fire is going in the living room. My father in-law seemed mildly insulted that we would suggest that, and brushed it off by insisting that the scraps were the end pieces cut off before the mill treated the wood. I am fairly certain that there would not be marks on it unless it were tainted. My questions is- d…

      • Like
    • 17 replies
    • 3.5k views
  16. Started by Brendon_t,

    Browsing CL l, I came across this posting. Showed it to my wife, her words were "I'm sure you would like to make a table out of that. " What's she mean??

  17. Started by WoodlandRenovations,

    Hello all getting caught up on all the WoodTalk episodes and found that Shannon (sorry if i miss spelt) offering the Hardwood to go site is that still ran by him? or is it someone else now? Would love to support a fellow wood lover if they deliver to Colorado.

  18. Started by Just Bob,

    I am working on a live edge slab of sapele, I am ready to epoxy the edge, but there are some iron stains along the edge. The stains aren't "horrible" but they are going to show once its finished. So I would like to try to bleach them out, I have used bleach on oak, but that's the limit of my experience with bleach. Couple of questions. Do you see any problems with using bleach? And if I do this should I bleach the entire edge or just work on the areas with the stain. Yes I know there are a ton of powder post beetle holes, I have already talked the supplier, the wood was kiln dried, and they are not going to hurt the final project at all. I not sure the stains are …

  19. Started by JosephThomas,

    I picked up some cherry thru CL today. I plan to use this to build a few small pieces of bedroom furniture over the next couple years. Links to a few pics below, there's a variety of grades, but even the common boards have good figure IMO, and the sapwood is pretty minimal as you'd expect. These were leftovers from a huge lot he used for many projects over the years. He said he picked it up back in North Carolina back in the 80s when he and a few others from the local FWWA pooled their money and bought a boxcar's worth of cherry all at once! It's mostly 4/4 s2s, the big boards are 5-8" wide, and about 10' long. There were a handful of shorts he basically threw in for …

      • Like
    • 11 replies
    • 3.2k views
  20. Started by Tom Cancelleri,

    I went to a lumber yard today to pick up some walnut for the doors and drawers to finish up the vanity. These guys always have nice stuff at the shows and good prices on things. So I go to their yard today to see what they have in walnut. All they had were shorts 5-6' long and that's fine, however they were all 4/4 slabs, ok that's fine I can work around that. However there wasn't a single board that wasn't horribly water stained and loaded with tons of cracks (I'm talking 12" cracks diagonally from the ends of the 5' slabs. At 7.50 a board foot and going over the slabs about 40% waste, they can keep it. I asked if they had any walnut in board form and he looked at me lik…

      • Like
    • 9 replies
    • 2.6k views
  21. Started by miranthis,

    Found a guy with the ash I need and some other good woods at really good prices, but he has it rough...he will plane it, but no SLR.....so the question is, How do I make that SLR myself. I have: Old table saw, well set up, but a Craftsman 10 in contractor saw from 1967. 6 inch craftsman jointer Can I do this? Jeff in KC

      • Like
    • 18 replies
    • 4.5k views
  22. Started by wnaziri,

    I was going through my stash of lumber and found two boards that were mixed with maple that felt different. These two boards seemed heavier than the rest so I was intrigued. Put the boards through the planer and saw something I did not recognize. I would like to know what you all think this wood is. I placed a piece of figured maple to show the differences. The mystery wood is much more yellow. The stripes are wider and not as tightly packed as maple. I Thanks for your help. By the way, I am thinking of make a tool chest from the two boards and I would like to know what wood I am using.

  23. Started by miranthis,

    I picked up about 30 bd ft of white oak from a guy that was downsizing. They were left overs from a cabinet he built. it has been stored in a finished basement and is in good shape. A couple of the ends have split a few inches over the years. Boards are 6 - 8 ft in length. Should I just store it until I use it (cutting the bad ends out later), or should I cut out the couple of split ends now, before I store it? Jeff in KC

  24. Started by Eric.,

    I brought a load of lumber home yesterday so I had to do some rack-orgo this morning. I figured I'd share this with everyone while I had these boards out. Since I'm such a swell guy, I always give customers up at the yard my honest opinions about wood species when they ask me. And it seems that at least once a day I warn someone about the tragedy that is padauk...and very few seem to believe me. Here's proof. A gray, muddy mess. Granted, these boards have no finish on them, but they've also been exposed to ZERO direct sunlight. They've been up on my racks for a year, maybe two.

      • Like
    • 20 replies
    • 4.7k views
  25. Started by theyellowtreeworkshop,

    Has anyone any idea what species these are?

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.