Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by Tom Cancelleri,

    Lots and lots of it. Description when I get home.

      • Like
    • 23 replies
    • 4.1k views
  2. Started by dodgeram99,

    I glued up 3 peaces of cherry to make a panel. After glue up, the panel decided to bow a little bit. Its not much, about 3/16 on an inch. If I push done on the bowed corners the panel is flat. I cant joint it because the panel is 16x20. I was woundering if i spray water on top and put weight on it to push it flat and let in dry. Will this take the bow out? Or will it come back?

      • Like
    • 20 replies
    • 5.1k views
  3. Started by amanda11984,

    Hi everyone! My husband and I build tables using mostly reclaimed and sometimes rough cut wood. We're pretty new to this though. I had a customer send me this picture and ask if we have this kind of wood-but she doesn't (and I don't) know what it is. I'm sure someone in the awesome community can help me! Thanks in advance.

    • 8 replies
    • 2.6k views
  4. I have yet another find from my barn. This piece has some checking. I was hoping someone knew of a good way to save this beautiful board. I was thinking of "painting" some epoxy over it and then scraping off the excess, but I don't know how that would work. Any helpful suggestions? I'm posting a picture of one side of the board in hopes the checks show up enough for you to see. Thanks! Kent

    • 13 replies
    • 3.1k views
  5. Started by Dnorris1369,

    Not a bad haul for Saturday morning Sent from my iPhone using Tapatalk

    • 8 replies
    • 2.7k views
  6. Started by MarkN1975,

    Hi guys, I cut and planed 3 perfectly straight pieces of 3/4" plain cut walnut. I wanted to glue them together to make a small panel. I clamped & planed the edges in pairs to get a quality glue joint, I carefully glued and clamped them together using clamping cawls to match and correct any irregularities along the length as the glue dried and reduce any sanding needed. The day after, I went to make some cuts and noticed that the panel had cupped. Why did this happen? Is there any way to correct it so I can cut a straight miter along the length of the cup.? How do I stop this from happening again in future? Thanks in advance for any help. …

      • Like
    • 17 replies
    • 4.5k views
  7. So I came across a lady that wants a standing Black Walnut taken down on her property and I was lucky enough to come across it. This will be the first time that I've gotten a tree milled, so I'm pretty lost as to what would be best. I don't have a particular need for the lumber, so don't have specific dimensions/slabs that I want. I also think I can get some decent pieces for the lathe? Here's the dimensions: Diameter at Base - 20" Diameter at chest level - 18" Left Branch Diameter - 14" Right Branch Diameter - 13-1/2" It's approximately 50 feet tall and the lady said that it's about 30-35 years old. The woodpeckers seemed to have ravaged the tree, so I'm …

      • Like
    • 29 replies
    • 6.8k views
  8. Started by baok,

    Taylor Guitar company has a magazine which, this month, has a series of nice articles on where their wood comes from and how it's used. You can read it online here: http://www.taylorguitars.com/sites/default/files/Wood-Steel_Winter-2015_EN.pdf

    • 1 reply
    • 2.5k views
  9. Started by woodbutcher74,

    In St. Louis for a couple days R&R. Trying to get a schedule together. Anybody know if U-Pick is still open on Sundays? The website site says they are open on Sunday for Fall and Winter.

      • Like
    • 19 replies
    • 2.9k views
  10. Started by ScottyM,

    Hi everyone, My sister-in-law just gave me a slice of the redwood tree she had to remove from her yard. It's almost exactly 3 ft. by 4 ft. It had been 2 trunks grown together, so there's 2 piths. The tree was in Pasadena CA, and I'm in Simi Valley, so the climate is similar. Dry & warm, but not as extreme as Marc in Phoenix. Here's the photo: Here's a link to the full sized photo: http://mcclaury.smugmug.com/Woodworking/Forum-Photos/i-kXsTpxK/0/O/IMG_1394.jpg The thickness is 2 1/2 inches at its thinnest point, and 6 inches at the thickest. Because the guy with the chainsaw was not too clean on the back side, that 6 inches will need to come d…

      • Like
    • 4 replies
    • 3.7k views
  11. Started by Willin,

    Am planning to build a sofa table next, a copy of an arts and crafts piece designed by the Scottish designer and architect Charles Rennie Mackintosh, circa 1904. Pic below. Setting out Monday, I went into town intending to get either cherry, white oak, or red oak, but whatever, in rift sawn. The first place I went, a yard that sells all their hardwood hit-and-miss planed to all the standard thicknesses, had it in white oak, and best yet, on sale. So, for $5.95 per board feet, I picked some up. I went through about half of the 125 or so ten footers they had in the sale bunk, to find what I wanted, and the pics show the results. Clear select white oak, rift sawn…

    • 6 replies
    • 2.7k views
  12. Started by roadmutt,

    https://akroncanton.craigslist.org/mat/4977302649.html Bought some 4 inch thick. Nice and clear. Air dried 5 years.

    • 2 replies
    • 2.4k views
  13. Started by treeslayer,

    here's a couple of pictures of some walnut i bought last week, the one pile is all 2 1/4 to 3 inches thick and the other pile is mostly 1 inch to 1 1/2 thick all 8 foot or more. got both for $150.00 bucks total, its all rough sawn, the guy just wanted to get rid of it to make room in his garage. some of it is firewood and some i'll have to make a planer sled to get one flat side as it's a little twisted but i thought what the heck, i'll have walnut for a long while. just noticed should be walnut STASH not strash, brain not communicating to fingers this morning

      • Like
    • 13 replies
    • 3.1k views
  14. Started by Tom Cancelleri,

    So I was rearranging my shop today and cleaning things up. I moved and relocated my slabs and figured I'd snap a picture. I thought about what I paid for these, and I really lucked out on these. The cherry slab is 18 board feet, 8/4 thick 119" long, live edge on both sides, air dried 25 years. The walnut is roughly 40 board feet 12/4 111" long. Cost: Walnut - $40 for the slab. Went to an auction and they get to this huge slab of walnut. Only 2 people bid on it. I was the high bidder at 40 bucks. Cherry - $36, paid $2 a board foot for the lumber, I should've bought more slabs from the guy. Was a good/bad time to buy lumber. Good because the price was right, bad becau…

    • 9 replies
    • 2.9k views
  15. Started by Willin,

    Visited Collectors Specialty Woods yesterday in Denver to see what they have Well, if its burls, crotches, monster flitches, anything at all you need to make large scale tables, they have it for you. Saw slabs of exotic figured woods priced at $8,000 to $14,000 each, size maybe 2-1/4 thick by 40 x 100.

      • Like
    • 12 replies
    • 3.2k views
  16. Started by ekomeshak,

    Had a large oak fall down in our woods, and I've been splitting it for firewood. The wood is loaded with these wild swirls & spirals - sometimes around a knot, but often just in an otherwise straight section. I've split my fair share of oak, but I've never seen anything this prevalent. Is anybody familiar with this? I'm wondering how something like this could be used in a finished project, and if I should have tried to save some for lumber.

      • Like
    • 11 replies
    • 9.1k views
  17. Started by collinb,

    I've got some projects in mind but would like to have wood that is 3/8" or 1/2" thick. But go into a wood store and it's all 3/4, sometimes 4/4 or thicker. So ... does one buy 1/2" lumber or buy thicker and cut it to size?

    • 17 replies
    • 3.3k views
  18. Started by Chicirda,

    Any woodworkers from Philadelphia, Montco, Bucks, NJ out there? If so, where are some good places for some different wood options? Tired of Lowe's and Home Depot boards.

    • 5 replies
    • 2.5k views
  19. Started by mkrusen,

    I'm going to be building a version of Marc's rustic outdoor table for my parents new farmhouse. My sawmill/lumberyard carries both northern white and western red cedar, however the northern white is significantly cheaper. Anyone have any experience as to the color differences between the two or see any other reason for not going with the northern white cedar? Thanks for the help!

    • 7 replies
    • 2.8k views
  20. Started by Brendon_t,

    I ran across a 300 bf lot of 8&12/4 australian black wood a guy is wanting to sell. I couldn't find much info about if on the forum since everything with "wood" comes up. Has anybody worked with it? What domestic does it closely resemble? The price is right and if it's hard enough, I think it may become a new bench.

    • 8 replies
    • 2.7k views
  21. Started by bushwacked,

    Going to make another essential oils holder for a friend. It will be going in the bathroom this time. Is there a certain wood that is good for this or is it all about the finish? I was thinking of maple but not sure what to finish with to protect from the steam of hot showers. Looks something like below....

      • Like
    • 19 replies
    • 2.9k views
  22. Started by Coop,

    I bought a 3' x 5" piece of be maple today to use for drawer fronts of a small jewelry box. This board is so fine that my woodworking manhood took complete control of this purchase. The guy at Rockler chopped this piece off of a longer board with their miter saw and the entire cut was black. I didn't know this stuff was that hard. After I got home with this prize, I remembered seeing somewhere that be maple is not the easiest to mill. The latest thread I could find here was in 2011 and it wasn't encouraging. Is there a recommended method of taking this piece from 1" to 1/2"? I have a planer, jointer and ds

      • Like
    • 37 replies
    • 6.3k views
  23. Ok the topic might be a tad confusing. As a new woodworker I was wondering if there is a reputable resource either online or printed that goes through the different species of wood and goes into some detail regarding the wood. Such as origin, hard or soft wood, common uses, etc. Things of that nature that would allow me to get a good basic grounding for the type of wood that I should look for during the planning stages of a project. Any help is much appreciated.

  24. Started by wtnhighlander,

    This stick was sold to me as cherry, but scraping or planing does not reveal the pinkish color I expected to see. Here are a couple of close-up after scraping the surface. First a face grain shot: Then an edge grain shot: Sorry the lighting is uneven in both shots. I just snapped these with my phone, and my garage lighting leaves somewhat to be desired... So, any opinions?

  25. Started by Cliff,

    Ordered some s4s Padauk from Bell Forest. Nothing major, I think it's 3/4" x 5" x 8" or something. Two boards at $9.99 each. stickered it with some other wood stickered above it to add weight. Been 4-5 days, took a look at it last night and it's twisted. This same thing happened with some poplar from Lowes, so I can see that apparently the time has come for never again getting s4s lumber. Anyway to fix the twisted wood without planing it down to nothing? I bough it this size because I need it to be rougly this size. I can cut it down to 3" wide and a couple of inches off either side but I don't think that will fix the twist.

    • 2 replies
    • 2.3k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.