The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
My favorite, and only reasonable hardwood supplier only sells S3S lumber. I need 1" stock so buy 5/4 which comes in exactly at 1". I milled to length and width a couple days ago and two critical pieces turned into pretzels. No opportunity to mill flat. I would be forced to buy 6/4 just to end up with what I need. I'm tired of creating expensive firewood... Anyone know where you can buy rough sawn lumber in San Diego (that isn't Frost)?
-
-
- 22 replies
- 13.1k views
-
-
I am planning a toy chest type piece and my plan was to use some maple lumber and oak panels. I was going to pick the materials up from a big box store, Lowes. But i am wondering if i should look else where for a better grade and straighter boards. Thanks Jeremy
-
-
- 18 replies
- 4.7k views
-
-
I am of the "build it from wood that is the color that you want the final product" school of thought. That is, I try to avoid stains and dyes at all costs! That said, I've been asked to build something to match this: http://ak1.ostkcdn.com/images/products/P10766117.jpg Is there a wood species that is this kind of red/brown color? Thanks! David
-
- 15 replies
- 3.6k views
- 1 follower
-
-
I am hosting a 75th birthday party for my grandmother in a few weeks and I am making a keepsake box for her as a gift. My uncle who now owns her old house that she raised a family in, had a large black walnut tree come down that was in the center of the yard. It came down about three years ago and he set a few large pieces aside in the event that someone might do something with them. They are 18-20" diameter logs, that have been stacked outside for the last 3ish years. What would the feasibility be of milling down some of it to use in a box? I was planning on making the panels of the box out of quilted maple, and using contrasting wood for 4 corner posts and the edges o…
-
- 7 replies
- 2.5k views
-
-
First post on forum, looking for quick and dirty advice to not screw this up. Within a day of cementing my decision to get into woodworking with no prior skills, and little knowledge..... A sign from the universe dropped into my lap. Long story short, I came into possession of some wood that has sentimental value that I wish to dry properly. Elm trees were cut down, with a claim from the power company that they were diseased. I spotted them on a drive, and noticed the trunk was nearly exactly a heart shape. With help from some folks authorized to dispose of the wood, (these were considered nothing but firewood) I now have several "slices" cut via chainsaw. My thought is…
-
-
- 24 replies
- 3.8k views
-
-
I was talking to a cabinet maker friend of mine and mentioned I have about 5 jigs I need to make and was planing to use birch ply for. He said to bring my truck on over because he has a bunch of .75" birch that he hardly ever used just taking up space. I went over and tried to lift the first 4x8 sheet. . Holy cow this stuff is so darn heavy. I'm used to using home store 3/4" ply that is pretty darn light. This stuff feels like it has an iron core. I left with 6 sheets of ply and some beautiful cherry shorts for free. I think I need tp bring him a case of beer now. .
-
-
- 5 replies
- 2.6k views
-
-
This summer I was able to pickup some air dried lumber, 4/4 cherry 4/4 white oak, and 8/4 walnut, at a local auction. He had several thousand board feet left that didn't sell. I recently came into some extra loot so I decided that rather than buying tools, I would invest in some more lumber. Having a good supply of lumber on hand has changed my woodworking. Retail lumber prices are no longer a project barrier. I can build anything I want whenever I decide to start. Specifically, I wanted some 8/4 cherry. Called him up today and went over, after some fierce negotiating got around 500bf of 8/4 Cherry and 400 bf of white oak for $2200. Didn't plan to buy the…
-
- 22 replies
- 3.9k views
-
-
I had a fairly big walnut tree fall in a recent storm. I want to mill it but I'm not sure into what. I have no woodworking projects planned at the moment but ultimately I would like to do some simple furniture pieces and perhaps some smaller items like boxes and perhaps some trim for my house. Can anyone recommend what dimensions I should cut tree to? What sizes would be the most universal? Also if anyone could briefly list the advantages and disadvantages of walnut wood I would greatly appreciate it. Thank you very much in advance
-
-
- 16 replies
- 3.2k views
-
-
So I did a stupid thing... this past spring, I hauled a big stack of walnut that my grandfather had from a tree he felled up to my place. It was stacked and stickered, in my aunt's barn for somewhere around 8-10 years. When I picked it up, there were dead asian beetles on some of the boards. I didn't think much of it. I hauled it home.... and (heres the stupid part), and stacked it in my unfinished basement by my shop. Well today I went to move this big stack, so I could bring in a table saw tomorrow. And I noticed some piles of sawdust on some of the boards. I checked and vacuumed each side of every board. I pulled off all live edge to see if anything was underne…
-
- 9 replies
- 3.2k views
-
-
All, I'm getting ready to start building a chest of drawers for my son that will be born in early May. I'm deciding (read: my wife is deciding) between cherry and figured maple, and in researching prices/suppliers on figured maple I'm getting pretty confused, probably because everyone seems to have different terminology. My main questions: - Is there any difference between curly hard maple and curly soft maple, other than the fact that one is hard maple and one is soft maple? Does one tend to have more "curl" than the other or is it just random? I ask because bellforest lists them separately (and the curly soft maple is significantly cheaper). - Is tiger …
-
-
- 7 replies
- 2.8k views
-
-
The table top of my dining room table has seen some better days. From raising 3 kids, it is quite beat to hell and the epoxy fillings that filled large holes have come loose. My wife has asked me make a new top but with what? I have only really worked with red oak and a few colorful exotics for cutting boards. The new top will be attempted to be stained to match the current table bottom and benches. They are all quite dark. I am thinking walnut with a spring joint breadboard ends. The table will be 7x4 in California without much weather change.
-
-
- 19 replies
- 3k views
-
-
I picked up this board at Lowe's today, while procuring my poplar for Marc's toy chest build. Is this technically considered a type of Birdseye'? It was pretty so I grabbed it. The photos really do it no justice. It almost looks like the holes go all the way through the board when it catches the light. The figure runs the full length of the 8 foot board.
-
-
- 27 replies
- 8.5k views
- 1 follower
-
-
Well the ash next door. Mine was spared this year. Two others on my court were taken this year. Two last. The first chunk off the trunk is 18" diameter by 4ft long. Damn emerald ash borer.
-
-
- 8 replies
- 2.5k views
-
-
Picked up some exotics from the craft board bin in at woodcraft. The whole family is getting small boxes for xmas this year. From front to back: Canarywood Rosewood Zebrawood Bocote Marble wood
-
-
- 12 replies
- 3k views
-
-
Wood that's right Wood...almost done with the joy of machine assembly and made only the second trip to the local hardwood seller. Picked up some Sapele and some Hard Maple. Also grabbed some misc pieces to play with; Some Padauk and Walnut. Then stopped at the HD for some Poplar and they had some S4S maple that I grabbed since my jointer is not here yet. Then went to WoodCraft and got some thin strips and some veneer to play around with for the cutting board experiment oh a mahogany dowel for my beer caddies. Almost there... just the tablesaw to finish...but have to go to a company XMAS er Holiday er whatever celebration this evening but tomorrow is Saturday and…
-
-
- 17 replies
- 3k views
-
-
Hi all, Looking for some advice from those of you that know a lot more about this than I. I had an American Elm cut down from my father in laws back yard and milled into live edged slabs. It along with the burl has been aged for a year now and I am looking to get it to some local crafts people but I am unsure of what a fair price would be to ask for. I have about 450 board feet, varying from an 1 1/2" slabs to 3" slabs. Longest being 7' and down. Any advice appreciated!
-
- 9 replies
- 14.6k views
-
-
Went out for dinner tonight and saw this place across the street called local wood. Coming soon. Reclaimed hardwood for woodworkers. Live edge slabs, etc. Can't wait! http://www.localwoodva.com
-
-
- 8 replies
- 2.3k views
-
-
I have been making some end cut cutting boards out of Maple and Walnut, Maple and Cherry. With the recent weather one of the 5 boards has started to bow on me (Maple and Cherry), can this be saved, I do not have a dehumidifier, and what can I do to stop the remaining boards from doing the same?
-
-
- 14 replies
- 3.9k views
-
-
Driving down to KC today we passed 3 semis with nice straight walnut logs. Hopefully these are destined for nice hardwood lumber and not pallets or firewood.
-
-
- 22 replies
- 3.6k views
-
-
My lumberyard was having a year end sale so me and my wife and son drove over excited as this place never let's us down (they like the ranch down the road so everyone wins ) Anyhow they advertised honduran mahogany for 4 dollars a board foot on the flyer I figured it would all be gone. Imagine my surprise when all that was in the pictures was what remained of the genuine mahogany ( like everyone I prefer big boards if possible) so I'm kicking around a little bummed this is all they had left (the sale had been going for a week already ) the owner comes over and we talk and I express I'm a little bummed I wanted bigger boards blah blah. He tells me he wants all the maho…
-
-
- 16 replies
- 2.9k views
-
-
Some pics of my hardwood dealer's inventory. This is where I spend my weekends working the register and shooting the breeze with other woodworkers. I get to help a lot of newbies out with their projects, which is great fun. In my spare time I dig through the new shipments and cull out the picks of the litter. Nice perk. Walnut slabs... Wall o' erotics... WIDE cherry boards. These two are bookmatched. Awesome. That's right...that's THREE FEET. What you would do with them at 4/4, I'm not really sure, but still...awesome. Wide QSWO. These are what's left of a once-in-a-lifetime pack. The biggest ones have been s…
-
-
- 64 replies
- 11k views
-
-
Wood ID is not one of my strong points, unless it's written on the wood, but no such luck this time. I asked a friend and he thought either African Mahogany or Sapele. What do you think? It turned very easily. First pic has no finish and second has a coat of spray poly. Thanks for the help!
-
-
- 10 replies
- 4.8k views
- 1 follower
-
-
Hey everyone, I am currently limited if working with pine and poplar from the big box stores for starting out. I do not have a jointer or planer, but I do have a table saw. While the pine and poplar is sold as S4S, is it really square/straight enough? Would a jointer help square this material even more? Or, would there not be much to gain? I'm just doing some basic projects and nothing super high end, so trying to come to a final decision if I can get by without milling tools and buying these types of lumber from big box. **Disclaimer - yes, I am fully aware that in a perfect world, I would buy a jointer and planer, along with finding a hardwood dealer and buyin…
-
-
- 10 replies
- 3.1k views
-
-
With sub freezing weather in Atlanta in the past week, and gas heat blasting all day (not my choice, BTW), I noticed this in the past 7 days: Old Dresser we picked up at an antique shop this spring Tenon of a stretcher popped out Frame and panel cabinet door came apart on one end (panel itself is actually hardwood) Jewelry Box I made in August: The top, which was bowed in August, but had been subdued by rare earth magnets and actually flattened out quite nicely....just rebowed - even the magnets won't keep it down Half completed projects in my shop: I'm afraid to look My Guitars: All my frets are super proud (I'm used to this, but now look at it with…
-
-
- 9 replies
- 2.8k views
-
-
I needed some oak for a couple of reindeer orders and I grabbed a pieces of oak from my firewood pile and threw it on my bandsaw to slice it up. Ran it over my jointer and cut up blanks. After the horrible cut oak smell cleared the air I looked at the grain and was amazed at how different it was compared to any oak I've seen before.
-
- 10 replies
- 3.6k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·