Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by Pwk5017,

    So, I have this problem in the form of a wood pile that is nearly 5' by 5' by 16-17'. It is the leftovers and rejects from a few auction lots that I recently purchased. If the boards were shorts, narrow rip cuts, only a few boards of a species etc. I piled them on this side. All the other boards I bundled and sold as discounted hardwood groups. Once I have my buyer come pick up the ipe lot, and i sell the exotic lot that you all were so kind to help ID, I will basically be left with this pile of wood, and an assorted 150ish bdft of nice white oak to sell. For the most part, everything has been pretty simple to price and sell. It was high quality material that I was sellin…

      • Like
    • 21 replies
    • 3.6k views
  2. Started by Josiah Brown,

    So I cut down a mesquite tree several weeks ago and got the wood cut into 1.5 inch boards. I've been drying them out with 3/4 in stickers in between and I hadn't checked on them until today. There were small piles of sawdust all over the boards. The dust seemed to be a different color than the wood but it was in perfect little piles that appeared to be from some kind of bug. Does anyone have any idea what this is and does it have a potential of ruining my wood?

  3. Started by treeslayer,

    posted this under old lumber pic but that thread wend dead but interesting enough i think to repost it here. Yale researcher Thomas Crowther used 429,775 ground based measurements and satellite measurements to estimate the earth has 3.04 trillion trees. he says 15 billion trees are cut down each year with only 5 billion replanted and estimates that the earths trees will be gone in 300 years. he also says that nearly 1.4 trillion of the earths trees are in tropical or sub-tropical forests and thats where the rate of loss is the highest. so i guess what we have learned is get busy making stuff because there will be no more trees in 300 years

  4. Started by Pwk5017,

    I am probably going to be really annoying this week, but i recently picked up a bunch of random exotics at auction, and i would like to identify them before storing them for future projects or selling them. Should be a good education for me, because i am lacking in the wood ID department. Ok, first up is this slab that is made up of 3-4 laminated boards. I wiped it down with mineral spirits to bring out the color and grain hoping that would help. My guess is I have bubinga.

  5. Started by ClintonR,

    Hi All, new here so bear with me. It appears to be a great community. I like refinishing solid wood generally but I've come across a few veneer pieces lately that I need help with. I have no idea how to identify wood and haven't attempted to refinish veneer that needed repair previously. The two areas that need repair are trashed, so I'm thinking I'll need to replace the entire area so matching won't be too much of an issue, just want to be in the same ballpark. I can strip, sand and re-stain veneer can I not? This is a vanity: A wardrobe: A solid wood secretary/winthrop pull out desk: Any help would be appreciated. Nice to meet everyone. ClintonR

      • Like
    • 7 replies
    • 2.8k views
  6. Started by Keggers,

    I was milling a beautiful piece of 8/4 curly cherry today and my day was soon ruined. This beautiful piece of wood has what I think are stress checks on both faces. I don't know if there is any salvageable wood in the whole piece. Maybe a pen maker could find some usable wood. Anyone interested let me know. The checks sure did ruined my day.

      • Like
    • 11 replies
    • 4.2k views
  7. Started by chrisphr,

    Bought some cherry plywood online from Home Depot that suspiciously looks like walnut. Pretty attractive stuff actually, but I don't think it is cherry. Here is a picture of it dry fit in the blanket chest.

      • Like
    • 11 replies
    • 3.2k views
  8. Started by tkpunk,

    Hey folks, trying to figure out what kind of wood this is. It's "reclaimed" from a crappy old coffee table my wife had. It was covered in a dark brown stain and I planed it all down. I'd like to turn it into a less crappy coffee table, but want to try and match the wood for base. The old base was just pine 2x4's. Any help would be appreciated. Thanks Tkpunk http://imgur.com/a/aOl71#0

      • Like
    • 11 replies
    • 3.1k views
  9. Started by roadmutt,

    I wonder how much a board foot it was.

  10. Started by estesbubba,

    So I'm sitting on the throne reading (OK, flipping thru ads) the Country Lanes magazine we get monthly in the mail. I saw this ad which pissed me off as a hobby woodworker as most of the wood I get is locally milled. It's people like this that make our most beautiful native hardwood even more expensive.

  11. Started by Idbill,

    Uh... I was scroll sawing a piece of Madrone (that I purchased probably about a month ago) and a ran into a perfectly round 1/4" hole that was well packed with sawdust... after cutting about 8" into the wood a live larvae popped out! Turns out, that the hole was about 10" deep about 1/2" in from the edge starting at the end. I looked for further holes, but didn't see any. How worried should I be for the rest of my wood? Bill

    • 2 replies
    • 2.5k views
  12. $1.93/bf

  13. Started by phinds,

    Eric sent me a piece of wood hoping I would be able to ID it. When I got it looked like sapele as soon as I saw it but Eric was pretty sure that's not what it is and after looking at a bunch of my sapele samples I could definitely see why he would say that. I have only one sample that has the same dark chocolate color of this piece but it DOES have that color and the face grain is the same. I did my end grain thing and compared it to all of the stuff I have in the Mahogany family, since it pretty clearly belongs in there somewhere. It's a close, but not perfect match for sapele. The things that are different are (1) the parenchyma bands are considerably more fuzzy and va…

  14. I'm trying to price up a dining table for a client. It needs to be live edge and I'd like some choice in wood species. Anyone got a good place I can buy from and have it shipped to my shop in Tarzsna California

    • 7 replies
    • 3.5k views
  15. Started by Coop,

    Sat., I took out a widow ladies "mahogany" stile, rail and panel door with a leaded glass insert and replaced it with a steel clad door to offer her more security. Nothing for me to do, as the old door was wood, to salvage the thing. Rails and stiles were secured with 5/8's dowels. The only experience I've had with mahogany was recently with the salvage of bits from an old boat. This door is probably 35 - 40 years old. Anyone have knowledge of what might have been used to build this thing? There is no laminate or veneer. I took a hand plane to some of it and it's really a pleasure to work with. Color is a little blah though.

    • 7 replies
    • 3k views
  16. Started by Milo,

    Hello All, I've got this nice piece of ambrosia maple that I picked up. I have a plan on how I want to mill it up, but I thought I'd double check first with other to see if they agree with the plan. As you can see, it is starting to split badly at the top and a small one at the bottom... The split pretty well centered, with a smaller split the bottom... It also has cup across it... So, I'm thinking; make an estimate where the center of the cup is on the slab and take the circular saw and cut right up the middle. Should I cut from the center of the bottom and aim for the split point at the top? I'm believe that making the cut will reduce the pressure that is in …

      • Like
    • 31 replies
    • 7.2k views
  17. Started by Bigboat123,

    So this was my first trip to a lumber yard, and i have no real idea what I should be paying for actual lumber. I found this guy through a neighbor. He sources all the wood from tree services and mills and kiln dries it in house. I was looking for some specific sized boards for shelving. I wanted at least 4/4 and 10 to 12 inches wide. I need at least 7 foot lengths. We went through his warehouse and found some southern yellow pine about 11 inches deep and just over 4/4. He said he could straight line cut both sides. I got a 4 boards, he charged 70 bucks. I feel like it was a pretty good deal but like I said this was my first time buying wood outside of a Home Depo…

    • 6 replies
    • 2.6k views
  18. Started by -MattK-,

    I had a mobile sawmill come to the house today to mill some black locust logs into lumber. I ended up with 550-600 board feet of 5/4, 6/4, 8/4 and 12/4 lumber. (585 if you believe my measurements and my excel spreadsheet) I wish I'd kept more logs - I kept only the straightest, biggest logs from the tree thinking I didn't want to be stuck with a bunch of leftover bark and unusable lumber on the driveway but I was impressed how good boards came out of even the slightly bent logs I kept. It was more sentimental and educational than a great financial move - I paid for a whole day (plus mileage) and only used ~2.5 hours (to cut 7 logs). Educational because you can see a log…

      • Like
    • 25 replies
    • 8k views
  19. Started by danbell78,

    I was lucky enough to have a friend who was taking down a couple of big oak trees, one white, one red. He also happened to live in the same neighborhood as a guy with Wood Mizer, so we took advantage of that and milled these trees up. We ended up taking 3 of the 4 logs, and gave the 4th to the guy running the mill. Had him cut as much of the white as quartersawn as possible. It is some beautiful stuff. Now just to wait 1 year for it to dry down!

  20. Started by mjwsjohnson,

    Hey all! I need some help identifying this wood. It is relatively light compared to some European Beech that I have. This is about a 6x6x36 beam that weighs about the same as a piece of Beech that's 3x3x48. It has a sort of waxy feel with straight course grain. I got it from a fella who got it from a truck driver that had it left over from a shipment. Any assistance would be appreciated as I am stumped. Some more pictures......

  21. Started by Tom Cancelleri,

    So I'm finishing up this african mahogany plaque, and the Danish oil is on day 3 of drying. After it's dry I'm going to put 2-3 coats of ARS over it. Any concerns or things I should be weary of? I've done plenty of shellac over blow, but never ARS over an oil. I know I gotta keep my coats light.

  22. Can't quite place it, but was cutting up some trim for the house and this was staring back laughing at me... The face looks familiar but can't quite place it..

  23. Started by Brendon_t,

    We pulled these off of a huge trunk of a coastal like oak I believe. There is so much rayflecking it is almost all fleck.

      • Like
    • 9 replies
    • 2.9k views
  24. Started by wtnhighlander,

    Anyone ever heard of such? I had lunch today, at the Aquarium Resturant in Nashville, TN. All the tables were surfaced with this incredible burl veneer stuff. Our table was 4' x about 30", using a bookmatched set, about 48" x 15". Seeing that ALL the dining tables were similar, I could not bring myself to believe the place would have spent what I expect is a ridiculous amount for them. So, am I mistaken about what such huge veneers might cost, or is there some "secret recipe" out there for laminating ply in such a way as to create a "burl-esque" (like that bit of word play?) surface? Sorry, no photo. Typical hide-the-food, fancy eating joint lighting (aka very dim) preven…

  25. Started by Pwk5017,

    this is my 3rd "big order" from the same yard. 'Big' to me is 500bdft at once. Total came to about $2100 delivered to my door after tax. Delivery is free when you spend enough, and this yard does not allow you to handle any boards yourself. I realize I'm not even close to being a large enough client for these people, but 2 grand is a chunk of change on lumber, and I'll probably end the year spending 5-8k. It grinds my gears when I receive boards that I would classify as complete garbage. The one has severe bug damage(lumber is kiln dried, could have happened before the kiln) and has a 18" check at the other end of the board. It's completely useless except for a 3' sectio…

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.