The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
Vienna hardwoods in Vienna Virginia. It's a cluttered disorganized disaster! wood everywhere, dangerous as could be, good prices, if you can find what you're looking for. Looking for some high figured curly maple at least 6" wide for the Rogowski boxes I'm gonna be making. I spot this monster of a board. 12" x 112" x 4/4 Zero patience! So I start jointing the face by hand. Clearly I'm not cut out for jointing by hand since I needed to take a break. I just wanted to see the grain with some naphtha on it. At $4.93 bf I'll take it! Sent from my 831C using Tapatalk
-
-
- 22 replies
- 4.3k views
-
-
My shop is my garage so space is limited. No room for a lumber rack. I have a Rubbermaid 7x7 shed that is weather proof (occasionally not mouse proof) and was considering storing my lumber in it. I think I heard Shannon say on WTO that he keeps his lumber in a shed, and Norm built one for the same purpose. Does anyone here do the same? Does it need to be stickered? Any pitfalls to be aware of? All of my lumber is KD. Just worry about seasonal changes around here, extreme cold in winter, and it gets hot as heck in there in the summer. Thanks
-
-
- 6 replies
- 2.8k views
- 1 follower
-
-
So, I had to pick up some more wood for this coffee table I'm working on... (actually I didn't, but I thought I did because I didn't see the piece I already had sitting my lumber rack). My wood guy let me know he had some nice curly walnut sitting around. I knew they were there, and I almost bought them last time. He was trying to talk me into it like I'm some sort of guy that can't control spending or something! ha! I have will of steel! I can resist anything!! Well, almost anything... on to the pics... Something around 30bf of walnut. Yeah, 10/4 On the rack! Where as happenstance would have it is where I found the spalted elm I needed for the other project...
-
-
- 17 replies
- 2.9k views
- 1 follower
-
-
I was given approx 50 bd ft of this wood - 4/4 rough stock. I've been told it was maple, blond oak or even ash soI'm not sure. Wood identification isn't my strongest skill so I thought I would turn to the experts... ?
-
-
- 21 replies
- 3.3k views
- 1 follower
-
-
I need to build a simple pedestal 12x12x36, needs to be bamboo. Doesn't matter if edges are exposed and polished or mitered, I prefer mitered to match the flooring. Now the question to anyone that has some longer term experience with this stuff. I'd like to know if it truly stable? Some say its terrible others say it as stable as it gets, no real consistent answers. If its not stable I don't want to miter the edges. Ive never received a complaint even with slab doors but want to make sure, on the other hand have only done a bunch euro cabs with the stuff. Thank you Don
-
-
- 18 replies
- 10.5k views
-
-
ok, I figure I get three of these a week before the forum collectively beats me for my ignorance. Pretty clueless on what this could be. It looked like a turd construction 2x8, but I picked it out of the pile and chucked it in the truck, because it had "product of Thailand" stamped on it and it was laying next to bubinga and wenge. I took a smoother to it to expose some of the wood and it seems like pretty nice stuff. So we know it was shipped out of Thailand and came in through Baltimore. Other than that I haven't a clue on this one.
-
- 21 replies
- 6.4k views
- 2 followers
-
-
Good thing this is my last mystery board, because i assume one has to pay after 3-4 IDs.. End grain growth rings look zig-zaggy(like that fine descriptive prose?). It is soft wood, my finger nail dents it a bit. It also appears to be semi-brittle, because i have a 2" section on the edge that is about to snap off along the full 11-12' length of the board.
-
- 4 replies
- 2.5k views
- 1 follower
-
-
Another post asking about wood species....what do you guys think this one is? Lots of open pores. Thx for the help... If the images below don't embed correctly, here's a link: http://imgur.com/a/5vd3p
-
-
- 10 replies
- 2.8k views
- 1 follower
-
-
-
Diamond in the 'faced' lumber yard anyway. ........ Found this 8/4 beauty in the middle of the stack. I could see the figure from the side grain. Had to move and replace about 300 pounds of 8/4 maple to extract it. $3.25 a board foot. About 11 feet long. A few ambrosia streaks here and there, but figure out the wazoo. Pics do it no justice.
-
-
- 14 replies
- 3.1k views
-
-
Expenses paid (but it should be from within easy driving distance, not a plane trip). The purpose will be to evaluate, inventory, and take some pics of the Jesup Wood Collection, described in this thread and which is in an Agriculture Center in or near Memphis.
-
- 1 reply
- 2.4k views
- 1 follower
-
-
A neighbor around the corner threw away two joined oak table leaves. 4/4. We were hoping they would fit our dining room table, but they're just a bit short. (The one on the left has some separation, visible at the top. But it's fixable. I think. At the price I won't argue.) That means ... I'm going to make something out of them. When warm weather returns, that is. Can't let good wood go to waste -- or a landfill.
-
-
- 8 replies
- 2.8k views
-
-
I was lucky enough to find a local guy who owns a lumber mill. what is nice is he does it out of bordom vs profit. I picked these up last week for cheap and saw he has some maple and cherry slabs sitting out back stacked. some of these will be inlays in some concrete tables and I will make some finger joint boxes with the rest. I think It a plus and a problem to find a local guy cause I will just buy with out a project in mind.. I just waiting on something to come in then I can get started. photo
-
-
- 12 replies
- 2.9k views
-
-
For our anniversary :-) Still sounds kinda dirty, but really... She got me a chunk of ebony. She didn't know what kind but I'm guessing either Mun or Brazilian? This thing is heavy! it's 6" x 6" x 3" and has to weigh at least 5 pounds! Very hard and coated with wax. I can veneer it out, but then what? Any suggestions what to do with a small chunk like this?
-
-
- 16 replies
- 3.3k views
-
-
So these friends of my wife.. he's a farmer/railroad worker/woodworker. Every stick of furniture in his house is home made. He has a few dozen apple trees, which is nice cause there is really nothing better than some fresh apple cider. Then of course, if I had to guess, he has about 10 truckloads worth of cherry and oak wood firewood (which he generously offered me as much as I want for my smoker!) But most importantly - he cuts his own wood for woodworking. He cuts it off of his own land and processes it. Mostly cherry and walnut. He also has tons of wood from just collecting people's fallen trees over the years - oak, elm, pine, fir. First picture - The uppermost shel…
-
-
- 23 replies
- 3.3k views
-
-
Good afternoon all, I have a design question for you all today. I've come to the conclusion that I need to build my own vanity cabinet for my bathroom, I just cant bring myself to pay almost $700 for a particle board cabinet from the home store. So I'm thinking of building my own shaker style cabinet if I can't find a local cabinet shop that would do it on the cheap (unlikely). Bathroom Colors: Shower walls are a greyish wood look tile, shower floor is greyish natural stone, and the bathroom floor is a linen texture grey tile. All will have the same steel grout color (medium grey). I'm anticipating painting the walls a linen/ canvas color, and all the fixtures are d…
-
-
- 6 replies
- 2.8k views
-
-
Granted, it's been (possibly stained) and sealed for a number of years so this might not be easy, but I'm just looking to get some close guesses here. I'd like to build some "matching" furniture so it'd be nice to get as close as possible on the species to make finishing easier... Drawers and side panels looked like red oak to me, wasn't sure about the drawer fronts or the top or the FFs....any input appreciated, thanks!
-
- 3 replies
- 2.5k views
-
-
so a friend gives me a couple of small purple heart boards and i decided i would make a recipe box my daughter, all good ,nice purple color, after sanding not so much purple color, more brown, i've read here that this wood will turn brown over time, my question is will it turn more purple now that i've put finish on it, ARS satin, exposure to light ect? don't mind it the way it is just wish it was more purple at least for a while. thanks for the help, dave
-
- 6 replies
- 2.7k views
- 2 followers
-
-
My wife and I went to the lumber yard yesterday so I could buy what I need for my bench build. The wife is the reason for this post. 2 years ago I promised her a live edge counter for our breakfast bar and I took her so she could pick out the slab. While I was in the warehouse picking the boards for the bench, she looked at the slabs. At the end of the day I ended up with 230 bd ft of beech and she picked a slab of sapele that is twice the size that we need.... I don't argue with her I never win. I would normally let any wood sit in my shop for a couple of weeks be for I start breaking it down, but the slab will be delivered on Thursday and a 6/4 by 30" by 11' slab…
-
-
- 10 replies
- 3.2k views
-
-
I'm about ready to finalize the prep for the top of my coffee table made out of curly maple and there is a small 2x2 inch section of some worm holes in the wood that I want to disguise/hide - any suggestions? Currently they are 'more white' than the surrounding wood...should i scrape them out and fill with something? The finish i will be using is coat of de-waxed shellac with some dye to pop the grain, sand back, and then 3-5 coats of arm-r-seal. Thanks in advance for the suggestions!
-
-
- 9 replies
- 4.3k views
-
-
What wood is this? Grabbed it out of the scrap bin at Woodcraft and then my phone rang and my wife checked out for me so I didn't have an opportunity to ask. Thanks!! Sent from my iPhone using Tapatalk
-
-
- 7 replies
- 2.6k views
-
-
I'm gonna do Marc's Outdoor Bench for my parent's yard as a gift for them. My mom is real big into her yard and outdoor decorations and such. Readily available to me I have the options of using white oak, western red cedar, and I'm not sure if sapele would be good for the outdoors, though I've read using it possibly, and it's fairly inexpensive. I would like to stay below 6 or 7 bucks a board foot.
-
-
- 20 replies
- 4.4k views
-
-
Anyone have suggestions on how much would I sell Mesquite slabs that are 5.5ft long, 14-16in wide, and 1.5 in thick?
-
-
- 7 replies
- 2.9k views
-
-
Like so many even the statement that I am still learning of wood types is repetitive. Anyway, picked them up at the local restore for a couple bucks ea. They look like a soft maple. Whatever they are they're going into Christmas presents. Sent from my MotoE2(4G-LTE) using Tapatalk
-
- 1 reply
- 2.2k views
-
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·