Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by wouldwurker,

    Quick question. I just got my shipment of 20 board feet of Flame Birch (so pretty by the way), from Bell Forest. Is there any advantage to keeping the boards in the sparingly wrapped, tight bundle, as it was shipped, while it acclimates? To limit the movement maybe? If not, I'd store them in the usual manner while they adjust. Thanks --VJ

      • Like
    • 23 replies
    • 5.7k views
  2. Started by estesbubba,

    I had to pick up some more cherry for my bed project and it was $4.15 for 15/16 SEL&BTR. When I bought it earlier this year it was $4.65 and 10 years ago over $5. The same place currently has an overstock of 15/16 FAS walnut and is selling it for $5.15 but you have to pull it from the top (no picking). A lot of their other hardwoods seem lower than they've been in the past except hard maple seems higher. I don't if there's a current trend nationwide of hardwood prices dropping. Anyone else seeing this? I'm tempted to stock up on some cherry buy my shop is already full and there is already overflow into my garage, but I don't have a lot of cherry. I keep telling …

    • 8 replies
    • 3.1k views
  3. Started by Slm220,

    I was asked to build a extremely large Butcher Block Table( 90in x 48in ). I was wondering what species of wood I should use to keep the cost down while maintaining a durable table top. This table will be for a family with a lot of kids if that means anything.

      • Like
    • 18 replies
    • 3.8k views
  4. Started by BeautysBeast,

    I had posted earlier about a CL ad I found. It was for 500 board feet of cherry. The original price was 800.00. I met the gentleman on Saturday, and purchased the whole lot of it for 500.00. It is kiln dried, and half is S&B, and the other half is #1 Common. All in all, I think I got a good deal. The wife asked where I was going to put it, and I said I would stack it under our raised back porch. (Clean, dry, and covered) To my amazement, she said, "Do you want me to stack it in the great room?" (Thats a huge extra room INSIDE the house) I said "Sure". Before I knew it, she had moved it, one board at time, into the house. I may not always understand her, but I su…

      • Like
    • 12 replies
    • 2.3k views
  5. Started by MisterDrow,

    I'm admitting my own inexperience here... Making some test boxes to see what works best for some tabletop game deck boxes. I'd like to use 1/4" solid wood and plan on rabbeting the top and bottom but when it comes to the sides, is 1/4" enough for a miter joint? I know plain miters aren't very strong, typically, but I'm hoping that having the top and bottom put on with rabbets will help to give it strength. The smallest boxes will be roughly 3" x 3.25" and roughly 4" tall. My initial thought was splines but on 1/4" stock, it doesn't seem like that would add much. Thoughts? Maybe I need to consider doing 3/8" instead unless I use plywood? I'm going to be messing a…

      • Like
    • 8 replies
    • 11.4k views
  6. Started by JerryJ,

    Some time ago I was gifted with a collection of wood from a supplier which is no longer in business. Each board was labeled as to species. One board was labeled "Gumbera". I have not been able to find any reference to this wood name. The wood is hard, close grained, straight-grained, red-brown color. Any guesses on the species?

      • Like
    • 4 replies
    • 2.7k views
  7. Started by BeautysBeast,

    This seems almost too good, but I will get your opinions, because I don't trust my own. Is this a really good deal? 500 bd ft. of kiln dried 4/4 cherry. 800.00. Comes out to 1.60 a board foot.

      • Like
    • 12 replies
    • 2.8k views
  8. Started by RichardA,

    Yesterday, the guy I buy my wood from stopped by the house and brought me a fresh cut piece of Box Elder! He also tells me that lower down in the tree that it was infested by some insect, and the remains of the insect leave this color in the wood as it grows. He also told me that when kiln dried, the red color is enhanced and doesn't fade over time. So, what do you guys think of firewood now?

      • Like
    • 14 replies
    • 2.8k views
  9. Started by Chestnut,

    I don't know a lot about the walnut harvesting process but i want to know if this is just what i should expect. I have 2 pieces of walnut, pictured below. One board is from a locally fallen tree that was air dried for roughly 5-6 years (front board). The other purchased from my local hardwood yard (rear board). The picture is as close to perfectly color balanced as i can get it. Is this what we can expect from Today's harvested walnut, or is this just the difference between steamed and not steamed? I've never really been super impressed by the walnut my local guy gets. Is the wood he gets an exception or the norm? The boards currently have wet poly on the b…

  10. Started by KSUBANKER,

    Planning to have some Oak and Walnut logs run threw a saw mill later this summer. Would like to do everything possible to keep the natural bark edge in place while the 1.25" planks are drying. Any ideas or suggestions on what can be done to help this?

      • Like
    • 10 replies
    • 3k views
  11. Started by davewyo,

    Over the last couple of years I have purchased perhaps 5-6 orders for hand-picked exotic lumber from Bell Forest. These are not large orders; perhaps $250 each. In every case I have been happy with the product. In each case the lumber has been exactly as described on the web site. If it says "minor checking", "worm holes", or "1/16" twist", then that's what you get. In my last order there was a stick of Zebrawood that was listed as defect free but came in with nearly every wonky defect you can imagine. It was bowed, twisted, and what I can only describe as curved (not straight-line ripped). To be honest, the board may not be cupped, but it's hard to tell with all the twis…

  12. Started by Donmattucks,

    I'm trying to repurpose some 19teens piano keys. I'm making a pommel for a large stirring spoon. I need Idon't know how or what type of glue to use to take several pieces and make them one.

      • Like
    • 14 replies
    • 4.2k views
  13. These are the prices I found for hardwood near my TN home. It is from an Amish wood mill. Am I wrong thinking that these prices are pretty amazing? Green Lumber Board Sizes Available: 8’/10’/12’ Poplar .65/BF Oak .75/BF Please call for pricing on board sizes larger than 12’. Cedar $1.65/BF 4/4/8 Cedar Posts: $ 15.00 Kiln Dried Lumber Poplar 4/4 $1.50 Pine 6/4, 8/4 $3.25 Ash 4/4 $2.25 Ash 6/4, 8/4 $1.85 Red Oak …

      • Like
    • 21 replies
    • 3.6k views
  14. Started by nikbrown,

    Ok woodworking/woodturning friends I have this hunk of sandalwood some friends brought back from India. It's wet wood. Right now it's wrapped in newspaper and stored in a plastic bag.... But it's started to check a little bit on one side. What should I do with it? It smells great! ? Too small to make much other than a couple small turned projects of some kind.

      • Like
    • 4 replies
    • 3.2k views
  15. Started by Janello,

    I'll remind myself of this piece. I started to mill this for a wall mount shelf to hold an A/V receiver in my shop and then stopped when I realized the project wasn't worthy of this thing. It's 4/4x7x4. Now I just need some drawer fronts or a better idea. Love this board.

  16. Started by JosephThomas,

    Bought some hardwood off craigslist, had a bunch of exotics in the scrap pile, here's a small sample of the ones I have't identified yet... This one below is very very dense, even for an exotic hardwood... I love the color/figure of this species... A lot of this stuff below, nice reddish hue

  17. Started by Mick S,

    I picked up a plank of black palm this afternoon to make a box for my stepson. I have zero experience with it and have read and heard that it's a tough wood to work with, but that the end results are worth it. Other than sharpening my tools, any words of wisdom on machining, joinery and finishing that anyone can contribute? Thanks in advance!

  18. Started by Chestnut,

    Bell Forrest is having a sale and i want to try two new things at once. I'm looking for an interesting wood to work with something that I've never used before and something that isn't available to me locally. Available Locally Hickory/pecan, Oak, Maple, Ash, Beech, Birch, Cedar, Doug Fir, Alder, Poplar, Cherry, Padauk, Sapele, Hon Mahogany, Lepordwood, Ganalco Alves, Wenge, Zebrawood, Teak, Purple Heart, Basswood, Ash, Walnut, Jatoba, Gabon Ebony, Macassar Ebony, Cocobolo, Bloodwood, Bubinga, bocote. I'm sure i missed a couple from my local yard that i don't pay much attention to, i was just going off memory. So shoot me a recommendation. I'm probably go…

  19. Started by Rex Edgar,

    Friday, an inattentive driver took out our mailbox and landscaping around the box and paper delivery tubes. In the almost 30 years I have lived at this location, I have erected new mailboxes at least 4 times. I have seen a design that I like: 6x6 (possibly 8x8) mounted at a 45 degree angle with the mailbox mounted parallel to the ground. The area in question is fairly level so there will be some setback from the shoulder of the road. As I stated, I have some experience with this task, but before I plow ahead, I thought I would get some input from the group. I have seen what is available (mailboxes) go down the tube as far as quality. The last box came with no latch to kee…

      • Like
    • 25 replies
    • 9.8k views
  20. Started by JosephThomas,

    Picked up some nice cherry boards off CL for a good price....stuff was advertised as 'old growth' which I can't verify obviously, but the stuff is nice, and the price was amazeballs. Just wanted to share a few quick photos for the people here like me that enjoy looking at lumber all day... There are 5 of those boards (14' long, 10-12" wide, most are 4/4 some are planed down to 3/4 already, and a handful of 8' and 5' boards... pretty much defect free, lots of beatiful straight grain. At least compared to the stuff they sell locally. All in all I paid a dirt cheap price compared to what new cherry costs, and this stuff looks way better than what I …

      • Like
    • 10 replies
    • 3.8k views
  21. Started by rodger.,

    Usually I would just let it gray naturally, but would like to protect a deck made from cedar. It is yet to be built, so I have some time. I was thinking rosewood oil from penofin, which I hear is good. Definitely don't want a film. Any opinions?

      • Like
    • 22 replies
    • 7.6k views
  22. Started by Cygnus A,

    Hey guys. I've have a tremendous amount of problems with plywood warping. Almost all of the jigs I've made have warped to some degree including my cross cut sled. It is pushing me to think of using MDF for my jigs. Has anyone else had this problem? I am using HD/Lowes ply (1/2 and 3/4) and I live in an extremely hot/dry environment (Arizona). The worst case was my outfeed table. My plan was to screw 2 sheets of ply together to form a 1.5" thick top. While building the base, the ply sheets sat in my shop for maybe 2 weeks. When I tried to build the top, the warpage was enough that I couldn't even force the two sheets to meet flush across their length, even with a…

  23. Started by akochevar,

    All, I am helping my parents clear their estate, and we came by this piece of oak that was cut down nearly 20 years ago. It has sat in the place you see in the image since then. The piece is 13" wide, 10' long, and about 8" tall. I would love if you guys could give me an estimate on value so we have a starting point for selling it. It is located in Michigan. Thanks in advance for the advice.

  24. I recently discovered a mature Persimmon tree (approximately 33" diameter) on the farm that may have to be removed due to its proximity to the highway. Does anyone know whether it would yield furniture quality lumber?

  25. Started by wouldwurker,

    Title Edit: Worth Keeping? (Question mark) Opened up the big piece of poplar crotch...realize it's just poplar, but was still a little disappointed none the less. Worth keeping a 3" slab or two and stickering? There's green wood sealer on the end grain, but it's getting some cracking along the curved edges. Suppose I need to lop off the top before it spreads? I realize the time it takes to air dry ...where to keep it ...blah blah blah More just thinking whether it's worth it given the lack of beauty inside. If not I will cut it up into blanks for …

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.