Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Greene and Greene Inspired 9 Drawer Dresser

Featured Replies

  • Popular Post

Did ya ever notice how the projects for your own home tend to take forever since everything else comes first? <_<  There is a bedroom set that people seem to like.  I have done them in cherry and mahogany.  This one is for me so it is walnut.  I also altered the dimensions some what to make it fit better for me and my home.  This is the general idea:

GnG Low CoD (0).jpg

It is a carcass with web frames although the drawers will use full extension slides and not rest on the frames.  Other folks prefer side-hung with wooden runners and I am happy to do that.  For myself, I like being able to get to the whole drawer.  The web frame parts are hard maple, half-lap at the corner and dado'd for vertical dividers in some places.

GnG Low CoD (4).jpgGnG Low CoD (6).jpg

The frames have a groove along the long front edge to accept the drawer divider trim.

GnG Low CoD (68).jpgGnG Low CoD (70).jpg

The side panel frame parts I get from resawn lumber in order to make the figure similar. 

GnG Low CoD (15).jpg

The SU drawing doesn't show it much but, you will see the side detail which is an oversized tsuba shape created with some opposing cloud-lift shapes later on.  I use templates for this and due to the different dimensions I had to make a few new ones.  I use 1/4" MDF, rough the shape out on the bandsaw and then fair it with rasps, scrapers and files.  I even have an old shave that I use for this.

GnG Low CoD (17).jpg

I gang the side frame parts and dado them for the web frames.

GnG Low CoD (20).jpgGnG Low CoD (21).jpg

I use a Mortise Pal to make floating M&T joints for the side frame construction.

GnG Low CoD (28).jpg

You can see the recess for the floating panels here.  The small upper and lower "connector" pieces will get rabbeted to complete the shape of the recess.

GnG Low CoD (33).jpgGnG Low CoD (34).jpg

Gratuitous clamp shot.

GnG Low CoD (43).jpg

Part of my design uses a shallow, but wide, rabbet at the top and bottom of the side frame assemblies.  These accept the trim you will see in a little while.

GnG Low CoD (59).jpg

There is discussion now and gain about part selection out of a board as opposed to just grabbing the next board in the stack.  Here I am selecting the portions that will serve as the floating panels in the end frames.

GnG Low CoD (63).jpgGnG Low CoD (66).jpg

These panels get a groove for a spline.

GnG Low CoD (73).jpg

GnG Low CoD (77).jpg

And I end up with this.  The floating panels are pre-finished so I don't get any peek-a-boo bare wood during seasonal movement.

GnG Low CoD (80).jpg

I find it easier to attach the web frames to one side at the bench.

GnG Low CoD (81).jpg

GnG Low CoD (84).jpg

You can sort of see how the frame fits into the shallow dado and acts as a keeper for the floating panel.  the picture is not real self explanatory but, I can talk about that more if anyone is curious.

GnG Low CoD (82).jpg

And its starting to look like something . . .

GnG Low CoD (86).jpg

Some more templates that had to be done to accommodate the different scale of this one piece.

GnG Low CoD (90).jpg

The drawer divider trim is cut from one board to retain some figure consistency.  I run a couple of dado's on the router table and then rip off the trim at the table saw . . . rinse and repeat.

GnG Low CoD (94).jpgGnG Low CoD (95).jpgGnG Low CoD (96).jpgGnG Low CoD (97).jpg

I lay out the front cloud lift divider trim and things start to come together even more.

GnG Low CoD (99).jpgGnG Low CoD (100).jpgGnG Low CoD (102).jpgGnG Low CoD (103).jpgGnG Low CoD (104).jpg

And more still.

GnG Low CoD (110).jpg

Time for the lower trim parts.  I cut a lot of exaggerated finger joints.  I have fouled enough of them to get pretty good at it and now just do this at the tablesaw.

GnG Low CoD (111).jpgGnG Low CoD (112).jpgGnG Low CoD (113).jpgGnG Low CoD (116).jpg

I make my own leveling feet.  These are made out of an old red oak door that I scrapped out.  I can't remember how many levelers I have gotten out of that free old door.

GnG Low CoD (117).jpgGnG Low CoD (118).jpg

Very few parts make it from machine to assembly.  That is particularly true of the cloud-lift profiles drawer parts.

GnG Low CoD (132).jpg

More fingers.  Since several of the drawer fronts are asymmetrical I only get to gang cut a couple of sets.  I am doing that here . . .

GnG Low CoD (138).jpg

Here's the drawer parts all roughed out.

GnG Low CoD (139).jpgGnG Low CoD (148).jpg

This may be interesting.  I want the full thickness of the drawer sides to show in the finger joint but, I also want full extension glides that require clearance.  My solution is to bury the glide in the drawer side.

GnG Low CoD (153).jpgGnG Low CoD (154).jpg

Closer and closer.

GnG Low CoD (161).jpg

I have a low angle block that I have fitted with a bob tail.  I use this as a sort of a #3 for fitting drawers and so forth.

GnG Low CoD (170).jpg

Alright, everybody's moving in and out real nice.

GnG Low CoD (182).jpgGnG Low CoD (183).jpg

Time for a top for this thing.

GnG Low CoD (190).jpg

I route a tongue all the way around as the top will float in a frame.

GnG Low CoD (191).jpg

Making the frame parts exceeds the depth of cut on my tablesaw so I finish them up by hand.

GnG Low CoD (192).jpgGnG Low CoD (193).jpgGnG Low CoD (194).jpg

And here the roughed out parts for the top are dry fit together.

GnG Low CoD (198) - Copy.jpg

I round the ends of the fingers.

GnG Low CoD (202) - Copy.jpgGnG Low CoD (203) - Copy.jpg

The corners of these joints are held with pegs which are hidden by the square pillow plugs later on.

GnG Low CoD (211) - Copy.JPG

Figure 8 connectors in 8 positions hold the top.

GnG Low CoD (212) - Copy.JPG

And its time for some pulls.

GnG Low CoD (214) - Copy.JPG

Once again some sort of hand tool seems to be involved in almost any part.

GnG Low CoD (215) - Copy.JPG

You can see here that the pulls are pulled from a single board.  Its just something I like to do on things like this.  Some folks notice and mention this to me, some never do.

GnG Low CoD (239) - Copy.JPG

I use a "strap" detail that comes from a small letter box in the Freeman Ford house.  I choose my material.

GnG Low CoD (226) - Copy.JPG

In this case I will use the right and left pieces and return the middle to stock.

GnG Low CoD (227) - Copy.JPG

They get coved.

GnG Low CoD (228) - Copy.JPG

And template routed.

GnG Low CoD (231) - Copy.JPGGnG Low CoD (232) - Copy.JPG

I then use a thin kerf medium tooth count blade to cut the easment where the strap will mate to the bottom trim.

GnG Low CoD (233) - Copy.JPG

A sanding block shaped with the profile of the trim assures a good fit.

GnG Low CoD (234) - Copy.JPG

GnG Low CoD (235).JPG

As an aside, here is a foolproof way to mark your depth.

GnG Low CoD (236).JPGGnG Low CoD (237).JPG

Now it is ready for some touch up surface prep here and there and I will lay the finish on.

GnG Low CoD (241).JPG

It may be into next week before I get the first coats on.  As per the norm, something else gets priority for the next few days.

GnG Low CoD (242).JPG

I'll continue this as I start to apply the finish.  I will need to make a bunch of ebony plugs.  I make these in that hang-time that comes between coats of finish.  I add the plugs before the last couple of coats.

  • Replies 89
  • Views 24.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Did ya ever notice how the projects for your own home tend to take forever since everything else comes first?   There is a bedroom set that people seem to like.  I have done them in cherry and mahogan

  • Thanks for bearing with me gang.  Although I'm a train-wreck with a camera, here's some better shots.  

  • Getting the bedroom rearranged is just taking forever so I will post some pics of this guy while still in the shop. The chatoyance is always a challenge for me with snapshots.  The built-in flash does

Posted Images

THIS will be a cool build with great progress and design so far.

Wow.  Looking good.  Nice clean work.  What did you use to finish the panels? 

Awesome.  You do beautiful work man.  Clean.  I appreciate your attention to detail.

But shame on you for those metal slides.  We can talk about that later. :)

WOW! Very nice work.

As @Eric. said, metal slides. I have to ask why bottom mount slides were not used for this. 

I am on the fence on metal slides.  He did a nice job recessing them so it does look nice and clean.  For a functional item that is used everyday they are very practical.  I have huge humidity swings in my house, about 20% in the winter and 60%+ in the summer, and that is with HVAC running 365, 24/7.  A friction fit drawer simply won't work, I don't care what anyone says. Side hung wood slides do work, but will be loose in the winter.   

The undermount slides like the ones Blum makes are more expensive but they work very well. Plus you can get the soft close feature. But I guess it's a little late for this project.

Really beautiful work, gee-dub! Great attention to detail from grain/figure selection to putting the small radius on the sanding block to match the trim blocks. Great work!

Great.work..Like.the.idea.of.undermount.slides.but.never.have.used.them..I.think.you.dado.the.bottom.of.draw

Typical undermount slides need a 1/2 deep recess under the drawer bottom. A knotch is cut on both sides at the rear of the drawer and a catch/ locking device is screwed on in both front corners.

Usually either 1/2" or 5/8" thick drawer sides are accommodated . A 5/16 to 3/8 clearance gap is left on both sides of the drawer. It's smart to get the slides first and do a sample/test drawer so you understand the process before you make the drawers.

Blum and Grass make a good product that has adjustments to get the drawer level and plumb. Some of the cheaper off brand undermount slides are harder to install with less or no adjustments. I tried 2 off brands and the savings is not worth the time and frustration.

  • Author
  • Popular Post
8 hours ago, Mike. said:

Wow.  Looking good.  Nice clean work.  What did you use to finish the panels? 

Thanks all for the kind words . . . I use an oil varnish blend with a alkyd resin, mineral spirits and BLO in a 1:1:1 mix with a dash of japan drier.  The side floating panels get a bit of brown dye to make them contrast the balance of the piece. 

You can see the contrast here on the tall boy.  I forgot to give my usual disclaimer that I am lacking the photographer's gene.  There's nothing wrong with the camera.  My photographer friend takes great pictures with it :angry:.

CoD Finish (11).jpg

CoD-Finished-2.jpg

8 hours ago, Eric. said:

Awesome.  You do beautiful work man.  Clean.  I appreciate your attention to detail.

But shame on you for those metal slides.  We can talk about that later. :)

I accept all the deserved abuse on the metal slides ;).  Pieces made for others have had side hung on hard maple runners or piston-fit riding on the frames and a center rail.  I also usually put panels in the web frames as some folks like to over stuff their drawers and I don't want things getting hung up in there.  The tall boy that this unit matches is built this way so the lowboy will be an experiment.

Under-mounts would give me the full extension and the clean look.  Maybe I should offer that to people.  This one is a mate for a tall-boy already in place so I went with the same side mounted, recessed slides and agree that hidden would make for a better overall product.

absolutely beautiful gee-dub, i am a big fan of G&G, Henry and Charles are smiling down on you, can't wait to see the finish go on

I'm not a huge fan of G&G but, certainly appreciate the craftsmanship and attention to detail!  Also, I like what you did with the drawer glides!

  • Author
  • Popular Post

Shucks fellas, thanks again :).  On the G&G stuff I use oil varnish blends.  I avoid colorants as a rule but, do add a bit of blue/green to genuine mahogany since I feel it is too orange.  I do nothing for the sipo and sepele cousins. They oil up a toasty brown all on their lonesome. 

For walnut I like to add a colorant that will maintain the "new" oiled walnut color over time.  Unlike something like cherry, walnut lightens over time with sun exposure.  Now I'm no finishing guru and don't declare this a recommendation but, here's what I do.

I sold this tip to a magazine but, since it has been out in print for awhile I'm sure I'm not breaking any agreement by sharing it here.  I used to fuss with measuring spoons and cups for mixing.  Over time one develops a comfort zone so now I just use ratios.

You want a fairly straight sided container for this.  Grab a piece of scrap and stick it in your jar, mark a line where the "full" level will be.  You now have 100% of that container by height.  For a 1:1:1 ratio put marks dividing the remaining length by 3.  For 50/50 divide the remaining length in half.  Mine is 1:1:1 plus a total equal amount of a mixture that is colored so my stick looks a bit weird but, you get the idea.

GnG Low CoD (246).JPG

Drop the stick in the jar.  Add you first ingredient till you hit the first mark.  Add your second till you hit the second mark and so on.  When you're done, use the stick to stir (and later re-stir) with.

GnG Low CoD (247).JPG

Here is the top with 3 treatments of this oil/varnish/color blend. This pretty well sets the color and matches what the material looks like without color which is just what I'm after.  After I have used this mix for the whole piece I let it alone for a day or two.

GnG Low CoD (248).JPG

I then return with a 1:1:1 blend of alkyd resin, BLO and mineral spirits to build film.  If I am not getting the build I am after I add a bit more varnish.  If the mix gets syrupy too quickly I add a bit more mineral spirits. At this stage their are no colorants so adjusting the mix is pretty safe and easy.  Usually 3 or 4 coats of this blend does the trick.

  • Author
On July 22, 2016 at 6:08 PM, Lester Burnham said:

How long have you been woodworking, if you don't mind my asking?

Thanks Lester.  Long ago and far away I had a small business making sound reinforcement speaker cabinets.  These were basically lock mitered plywood boxes that were coated with fiberglass a-la 1970's Cerwin-Vega.  Nothing much like the furniture I always wanted to make but, junior high woodshop paid off a bit and I managed to keep all my digits.  Life intervened and after a nearly 30 year hiatus I started making furniture about 10 years ago. 

I have a day job so clients need to be patient.  Four months to deliver a relatively complex piece is not unusual.  So far word of mouth keeps me busy but, I hope to retire before I get too tired to enjoy it and make more pieces per year.  This may require a lot of naps but, we'll see ;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.