Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by jahill5,

    Hey Guys, I have a kitchen remodel under way, and I'm trying to match a finish. Of course this is complicated, which is why I'm tossing this out to you guys. I have attached a couple photos of the finish on a buffet sideboard. I am trying to put a finish on some cherry cabinets, and am trying to match the style to the buffet as possible.The existing stain seems to be semi-transparent. I've never had to match something existing before, so any help or suggestions as to what the existing finish may be, will get me started (and will be much appreciated). The color is going to be similar, but not exact. I attached a third photo of the color chip (it's a viking range colo…

  2. Started by treeslayer,

    i have a customer who wants a dresser made out of doug fir but she wants it stained dark walnut to match the rest of the room, my question is can i expect the same problems with doug fir as with pine? i have never stained doug fir before and would think i would encounter the same problems as with pine. the wood is kiln dried, thinned shellac first coat? walnut is way out of her budget or i would build it out of that. as always, thanks for the help guys.

  3. Started by Keegan Riotto,

    How do you repair a blister on a surface that you can't clamp a wood block to keep the newly glued area down?

  4. Started by 111nathaniel,

    Hi! I'm making a set of Birch tables for the living room. I want to avoid yellowing film finishes, and finishes that prevent darkening. I would like my tables to darken a little but I dont want to stain. Given that I have a 3 year old and another on the way, I want durable table tops, so I'm prepping with Minwax wood hardener, is this a good idea? Also I was thinking of a oil finish because I like the warm feeling of the wood. But the durability of a film finish appeals to the wife. lol Like I said above I wish to avoid the film finish because it takes away the warm wood feel, and prevents aging and could yellow the wood. Thanks for any advice, Nathaniel …

  5. Started by Jgr327,

    I've built a farm table. Now time for stain. I have pine pedestals and wormy maple top. I did a bunch of tests on the wormy maple and the pedestals. My wife liked the colonial maple, so I stained the pedestals colonial maple, but they went a totally different colour than the wormy maple sample. I knew the different woods would have a bit of a difference, but it's more than I wanted. Is there a way to mix some minwax stains to achieve the same colour between the maple and pine? The legs are stained already, so I would be matching the pine to the maple. Thanks

  6. Started by dflan004,

    hi All! just finished a changing table for my baby due in April. my wife wanted it painted so we are painting it. my question is what kind of clear top coat should i use? it has to be some what durable since it will probably get wet and need to be wiped down. we also want a semi-glass shine to. i was thinking shellac since ive read that it is kid safe? but i think that would also cause some issues over the paint and i dont know enough about shellac to know if it would give a semi-gloss finish to it. so with all that said, what finishes do you all recommend? thanks in advance.

      • Like
    • 9 replies
    • 3k views
  7. Started by JosephThomas,

    Does GF arm-r-seal have a minimum application temperature? My un-heated shop is in the low to mid 50s all weekend and I generally don't heat it. It's also raining and fairly high humidity, so I realize I would have to wait longer than the normal 2-3 hours between coats...Just want to make sure it's ok though and won't fail to cure entirely at these temps, and I can't seem to find anything online.

      • Like
    • 9 replies
    • 7.2k views
  8. Started by wtnhighlander,

    A recent post about finishing wood with shoe polish made me remember these characters. I whittled these from 2x2 construction lumber, in the late 1970s or early 80s. HillBilly and Hound, finished with Kiwi medium brown wax shoe polish. HillBilly had to give up smoking after his corn cob pipe broke off, somewhere along the way. I was 15 or 16 when I made these, using just a whittling jack. I'm looking forward to the day life slows down enough that I can sit around and whittle again. Hopefully with improved results!

      • Like
    • 6 replies
    • 3.2k views
  9. Started by MoMiner,

    I am building a table that is made from 4 different types of wood and the top will use all of the woods intermingled. (Wenge, Jatoba, Padauk and Walnut). Because of the very open grains I need to fill the pores. Since the colors of the woods are so different, I'm wondering what single product to use? Also, what finish would be good? (I'm thinking Watco Danish Oil Natural). The table will be used as an office work table. Thanks!

  10. Started by Isaac,

    I've been wondering, Is there a rule of thumb for what surfaces of a project should generally be finished? Is it as simple as just finishing the outside/exposed surfaces that are expected to be seen? Are there any issues associated with having one side of wood boards finished and the other left untouched, in terms of absorbing moisture? For examples: the inside surfaces of a cabinet that would only be visible when the drawers are removed, or the bottom surface of the bottom shelf of a bookshelf that rests directly above the floor.

      • Like
    • 12 replies
    • 3.2k views
  11. Started by arbiterr,

    Hello everyone. I have this beautiful piece of a walnut slab that has a few small cracks. I need some advice on what would be the best choice and way to fill this. Currently, I have a Walnut wood filler and Epoxy resin. I have never worked with either and also do not have a flame torch for the Epoxy. With this wood, I will not be staining anything, but rather use an oil finish (tips on finish will be helpful too). I read about Danish oil and would love to know it anyone who worked with Watco's Natural danish oil knows if it's a clear coat or has a yellow tint to it? (since ill be using it on maple as well and prefer clear). So, will the wood filler look awkwa…

      • Like
    • 11 replies
    • 10.1k views
  12. Started by Derek_PNW,

    I am almost finished with my larger workstation / out-feed table and would like to finish it with Danish Oil - Black Walnut. The workstation is made out of 3/4" birch ply. My last steps are to finish the carcass and top of the workstation, trim with a white hardwood (poplar most likely) and build some drawers. However when it comes to finishing the carcass I am a little overwhelmed with the idea of rubbing it down with Danish Oil. . . Can I spray Danish Oil with my HVLP system? I have searched far and wide and have not found an answer. This makes me believe that this is NOT a good idea. If it is a good idea, great, but if it is not, why is that?

  13. Started by danbell78,

    Got an email this morning on this, seems like a pretty good deal from Peachtree, $150 off on the Earlex Sprayport 6000. Anyone have experience with this HVLP setup? I currently have the Earlex 5500 spray station now, and it does OK, but can see the benefits of some more pressure and adjustability. http://www.ptreeusa.com/edirect_011317_earlex.htm

  14. Started by lewisc,

    After seeing a few of you guys rave about Arm-r-seal, I thought I would try it out. The only problem is I can't find it down under. A google search returned this: http://www.feastwatson.com.au/consumer/products/interior/product-details/1512 Does the description sound like what arm-r-seal should be?

    • 2 replies
    • 3k views
  15. Started by a1606myrsclm,

    I'm making a tambour clock as a Christmas present and was just going to shellac it. I put some mineral spirits on a piece, I think this is a good representation of what the shellac would look like and my wife doesn't think it is dark enough. I understand it will darken with age, but what are some other options I could use, should I stain it a little darker? I'm laminating 4 piece together, I also am hoping the lines will not be so noticeable. Sent from my iPhone using Tapatalk

      • Like
    • 31 replies
    • 7.6k views
  16. Started by pideja,

    I mistakenly purchased Minwax Super Fast-Drying Polyurethane for Floors in the satin finish rather than the semi-gloss for my hardwood floors. I also purchased some gloss finish Minwax Super Fast-Drying Polyurethane. Is it possible to somehow combine the two products in order to get a less "flat" finish than is possible with the satin alone. Of course, I would have to figure out the correct proportions in order to match the existing finish of my floors. You see, I am attempting to "renew" parts of the floors that are worn by use and not the whole floor. I realize their is also the question of applying the new polyurethane so that the outer edges are on a gradient in order…

  17. Started by rodger.,

    i normally spray outdoors in the backyard (water based only). for years i have contmeplated an alternate setup - maybe in the shop or basement. i google and pintrest the topic, but go round and round in circles. anyone have any photos of their setup?

  18. Started by -MattK-,

    I was going to write a note directly to @Mike. about his wardrobe build, but maybe others can benefit or want to chime in... I'm building a cabinet with frame and panels and it's nearly time to pre-finish the panels. Do you go through a full finishing schedule on those panels or just a single coat to make sure there's no naked wood that sticks out with wood shrinkage? It's a sapele cabinet, panels are 33 1/8 and 17 1/8 wide. Real hardwood panels, not veneered plywood. thanks for any advice!! Matt

  19. Started by Audiokat,

    Could I put a few coats of salad bowl finish on after using mineral oil? I've used SBF a few times and loved the result and longevity. I recently did a set of boards with just mineral oil. After four coats and some cure time my wife washed a board after using the grain rose substantially. Im sure I could sand all the way down and start over but it would be nice to just add a few coats of bet salad bowl finish.

  20. Started by FlyinFish,

    I'm looking to get a spray setup for applying finishes. I'd mainly like something to apply clear lacquer finishes for when I don't want much yellowing from the finish. I'd also like to spray some latex paint if possible, but nothing large or that needs to look perfect. I'll likely get an HVLP turbine, a Fuji 3 or 4, later on to use for remodeling projects but I'd like some sort of LVLP gun to run in the shop on my compressor for now. I'm not looking for something exceptional. Don't mind sanding between coats. Just something to start playing with. My compressor is pretty small, a Makita MAC2400. It's under 5 gal and does just over 4 cfm @ 40 psi. It looks li…

    • 0 replies
    • 3.2k views
  21. Started by Marmotjr,

    I've noticed a lot of people on the net state they only sand to 120 or 180 before applying a finish. I've found I like to go to 320, 400, or even 600, especially with pens or other work on a lathe. The higher grits offer such a smoother feel and look to the wood. What I am missing here? I'm guessing they are using the finish to cover up any imperfections left on the wood, but wouldn't a smoother starting surface allow for less coats? Or am I just making more work for myself?

      • Like
    • 11 replies
    • 3k views
  22. Hello all. I just completed my Christmas build of two end tables for my wife - delivered the stained product on Christmas and then applied 4 coats of arm r seal after the holiday. My question is how long should the final coat be allowed to cure before the table can be used. thanks for the help BB

  23. Started by Texan6923,

    Im new to this cite and working with wood. I will appreciate any and all answers to my question. But i had poured epoxy on 2 pieces of mesquite wood and let them dry. In certain places there was a white haze like this. Any idea what it is and how to prevent it in the future. Ive been told its just air but i want to be sure.

      • Like
    • 15 replies
    • 5.6k views
  24. Started by Isaac,

    Just kind of checking my assumptions here. Typically I apply finishes as the last thing I do in the shop for an evening and don't return until the following day or later, at which point the finish is dry and any odors from the finishing have dissipated. Once the finish has dried/cured, does that mean the risk of VOCs is basically gone, or are they a risk even after the finish is dry and odors have dissipated? I'm typically using common urethanes and such.

      • Like
    • 8 replies
    • 3.1k views
  25. Started by DennisR,

    I glued purple heart with maple and when sanding the maple was being darkened by the purple heart or something. I was not as white when I started. how do I prevent this when gluing dark and light wood together and sanding?

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.