Finishing
2,922 topics in this forum
-
I have decided on a Fuji Mini Mite 4 for my spray system. My question is about accessories. I read somewhere about a cheaper, different brand of gun that some people bought as extra guns and were happy with. I can't find the article/thread. Does anyone here have another brand of gun that works with their Fuji setup? Also, what kind of pressure pot do some of you have? Would making a pressure pot be conceivable? Many people run 120psi air pressure in pvc. Why couldn't a person make a small 8-10 psi pressure pot? Any other info about your spray systems would be appreciated.
-
-
- 14 replies
- 5.2k views
-
-
I need some advice on finishing a farmhouse table. The table top is finished with 3 coats of polycrylic and its built out of kd Doug fir. I read polycrylic is just as good as oil polyurethane, however I think its to soft. I know Doug fir is a softwood. What would be a good product to put over the polycrylic that would be harder?
-
-
- 3 replies
- 3k views
-
-
I am building a out door farm house table. I'm looking for a bar top finish does any one have any ideas. I do not want to use salttreated wood.
-
-
- 12 replies
- 3.7k views
-
-
I am building a coffee table as a mother's day gift out of Hard Maple. This table is inspired by an coffee table my Mom saw at a craft fair one time and really loved. I've not been able to find a photo of the original, but here is one thing that I found that is fairly close: Note that the outlines of the images are have been essentially carved into the table top and then painted black, and the table surface is then painted. To give a bit more context here was the initial design I did in Sketch up as to what the table would look like. The idea was for the whole top to be painted and the base to be left natural wood. The top here is shown in blue, but the id…
-
-
- 9 replies
- 3k views
-
-
I am the new owner of some 12+ year old teak patio furniture. The former owner stained it with some kind of thick wood stain (I assume NOT made for teak). The set was then pressure washed in an attempt to remove said stain. This appears to have somewhat worked, but they are splotchy where some of the stain was left in the grain. It's dry, cracked in areas, and ugly. So now as the new owner, I tried to sand the tabletop to remove the mess and quickly realized sanding the HUGE table and all 6 chairs was far more of a project than I was willing to take on. I tried a small patch with teak oil and learned that won't work since, of course, the old stain shows through in pl…
-
-
- 27 replies
- 9.1k views
-
-
I am building a picture frame of Poplar with General Finishes Pre-Stain followed by Java Gel. I plan on putting on a top coat of Minwax WipeOn Poly. I am considering putting on a sealer of Sealcoat before the Poly because that's what I did in finishing a Cherry frame which turned out well. My concern is that there is already a sealer/stain and would the Sealcoat add anything before the Poly?
-
- 1 reply
- 2.7k views
-
-
Hi, I just found out about this forum via the woodworking subreddit and I would like to get some advice. FIrst, I'll have to introduce myself. My name is Mike and I'm a complete beginner in woodworking. My past experience in woodworking was to create sawhorses for this project. Now, situation around my question: I'm building a tabletop for my standing desk. (I purchased the mechanical parts from Autonomous) from Mahogany. As of now I have purchased the wood, joined the boards together into 2 sets: 60" x 30" and 60" x 15" as a 2 tier desk I was able to join the boards together including adding dowels to the seam to help support the table.…
-
-
- 77 replies
- 32.7k views
- 1 follower
-
-
Yes I'm breaking my rule of no painting wood. However I am working on a commission that needs to be satin black. Any recommendations for a paint and a primer to use on ply? I will be spraying it with my Fuji MM4
-
-
- 9 replies
- 3k views
-
-
Hey guys, I'm new around, yesterday I shoveled some snow from the backyard deck of my uncle's house, and since the snow closest to the wood surface was really hard I had to really stick the shovel deep and make a lot of force, when I finished it was all good but now today I woke up to find that most of it is cracked, and I need help finding the right putty/filler product, the right color and whether it's oil or water based, I was looking for them in amazon and the only filler product was not the of the right color (walnut), I believe, I found these putty ones but I'm not sure, have any of you bought them in the past? Color Putty Company 126 3.5-Ounce Jar, Brown Mah…
-
-
- 12 replies
- 3.3k views
- 1 follower
-
-
i have acquired a family silverware box that is starting to come apart. not sure how glue it back together. it has little or no $$ value, but it would be hard to calculate the sentimental value. my concerns are: i don't know what was used originally, so i don't know what will stick it back together. if i try - say,TBII, and it doesn't work - where do i go from there? it is a small joint, - i can't clean it out, without making the box worse. i have some syringes to inject the adhesive with, just not sure what to use. any suggestions?
-
-
- 15 replies
- 3.5k views
-
-
...as you're sanding away the lumpy orange finish (badly applied danish oil?) from the top of the solid oak lamp table you just picked up on gumtree...and then discover it's only partially solid oak, with veneered chipboard panels in a solid frame...and you've just hit chipboard on a panel corner . I'd have probably realised it was veneered on a larger sized panel. I've managed to rescue the corner to a satisfactory degree by carefully gluing a hand plane shaving of oak from a a block I had lying around and carefully sanding it down to blend it in. I'd be annoyed as hell if we'd payed proper money for it but as it is it's a pain but it will serve a purpose for the ti…
-
-
- 8 replies
- 3k views
-
-
I'm building a bathroom vanity and my wife would like it painted black. I don't have an hvlp sprayer and won't be buying one anytime soon. Was wondering if I could use a can of black spray paint and then clear coat. Would that give a strong enough finish for a bathroom? Dumb idea? Should I just brush on some latex paint? Any feedback is appreciated. Aaron
-
- 2 replies
- 2.8k views
-
-
Hello all, Let me start by saying that I am new to woodworking and love it. You just can not beat spending all day in the shop building something you or someone else is going to love for a long time to come; now onto my plea for help! The pool in my parent's backyard is now complete, and they have asked me to build a bench that will serve as additional seating for around the pool as well as seating around the firepit they are going to have built. The picture shows what the plan is so you can see that this bench will not be moved once it is in place. The problem is I know nothing when it comes to finishing outdoor stuff and don't want to mess it up, and the other is…
-
- 3 replies
- 2.6k views
-
-
Hi! I am a complete novice to woodworking who recently became responsible for maintenance of a log home. I have two refinishing questions and any input would be much appreciated! 1. Circle sawn fir flooring - My fir floors are in dire need of refinishing. They were installed about 10 years ago and only finished with one coat of DuraSeal polyurethane for wood floors. I've been advised to screen (probably 3 times...starting with a more aggressive 30-grit, then 60-grit, and finishing with 80-grit) and then refinish with up to 3 heavy coats. Thoughts on that plan? Is DuraSeal the best product for this application or are there others I should look in to?…
-
- 2 replies
- 3.6k views
-
-
Help! My husband and I are redoing our hardwood floors. When we took up the carpet that was in the living room it revealed a pretty dark hardwood floor. This is in contrast to the almost natural color of the other wood floors in the house including the connecting landing and stairs. He rented a sander, sanded the floors down and we applied a traditional cherry stain. The color came out much darker in the living room the anticipated which is fine, but definitely does not match the floors it connects to as they do not appear to be taking the stain the same way. Any ideas on what we can do to help blend the floors? We are okay with the darker look but can't have the tw…
-
-
- 6 replies
- 9k views
-
-
Howdy folks, I've been lurking around the forums here for a couple of weeks and you are are awesome! I started a refinishing of an old dresser and I'm having issues with the stain. It's splotchy and looks like poo. A little background. We have an awesome cat who pee'd on the dresser. Got that cleaned up with anti-icki-poo. There was some staining and peeling from clean up and pee. But got the smell out. I used orange citristrip to pull off the old finish then wiped it down with paint thinner to remove the residew. I then started sanding from 60 up to 220 grit. I took the top to 320 so I had a nice smooth top. This took care of a …
-
-
- 16 replies
- 4.5k views
-
-
I am looking for suggestions on what you guys would use to finish these. The sides are paper backed veneer and the top is 1/4" edge glued oak planks. An easy, natural type look is what I am thinking. However, I am open to any suggestions. I know that for now I won't be spraying, so a wipe or brush on technique is what I need. They have been sanded to 220 at this point. For anyone interested, the black is 3 coats of Duratex over mdf. The speakers are my own original design right down to the crossover. I am a member of the Parts Express Speaker Design Team.
-
-
- 19 replies
- 4.2k views
-
-
This isn't a typical question. I have a phone that has a Zebrawood back. I didn't know when ordering that the wood is unfinished. I suspect that even with clean hands, the wood will eventually absorb skin oils and discolor in areas it is touched. I would like to apply some kind of clear finish to prevent that, preferably one that results in the least change of appearance and am looking for recomendations The wood is not sanded completely smooth and the grain is pronounced. This back can be removed from the phone and the non-wood edges can be masked off fairly easily. Attached is a picture if that helps.
-
-
- 18 replies
- 9.4k views
-
-
hey guys i've been working with baltic birch plywood quite a bit and i've noticed any of the oil based products end up yellowing the wood which doesn't always look that attractive. I don't think that i'm going for a pure white wood, normally I like warmth in the work but the yellow i've gotten from oil based poly and shellac aren't that attractive. I've tried water based poly urethane and it didn't yellow it but it's a little to un-natural/heavy duty for my work. Have any recommendations of things to try that will make the wood look rich/dynamic but not yellow it? found this list http://www.rockler.com/finishing/finish/clear-water-based-finish never tried gen…
-
-
- 9 replies
- 3.1k views
-
-
Hi Folks! I'm getting some new bare wood furniture for the living room. Coffee table, media center and end tables. It's all arriving unassembled. I was wondering when I should put the finish on it. Before or after I put it together? So far I've only finished things that were already put together. I'm defiantly doing the poly coat after it's put together. But wasn't sure if staining it before would be easier because it would be smaller flat pieces or cause problems with scratching the stain. They are made out of parawood/rubberwood. I was planning on sanding them to 180 or 220. I'll be using the same stain I used on the dresser I did since I figured out how to avoid…
-
-
- 4 replies
- 3k views
-
-
i have used this for some time and it has given me good and bad days, today it was mostly good, but i had troubles on the last round of spraying on a piece that was to be the most seen piece.. it decided to give me fits. i ended up cleaning the nozzle and re-pressurizing the pot to get it to go and i t seemed to help to move the pot up higher to where i was spraying. at a height of 84" and the pot was at 36" got maybe 12 ft of air and supply line. the only thing i did notice was the compressor had kicked in during the reprieve to get it going better. i thought i had enough compressor 5 hp 60 gallon and a wall of 1" pipe for cooling and extra air supply.. i am close to …
-
- 5 replies
- 2.8k views
-
-
Hi all, new to this form and looking for some advice. My husband and I are remodeling a 1925 home in Seattle, WA. We are turning a small bedroom upstairs into a master bath. The room has some wonderful T&G paneling on the walls (see picture) that we love and would like to find a way to keep. Obviously the problem is the paneling (and joists behind) would not be be sealed inside the wall and a bathroom is a damp area (we have a fan and two windows, but still...). I am concerned that we would have moisture & mold issues if we cannot properly seal the T&G. Are there any suggestions as far as tactics we can use to seal the finished side of the paneling to be…
-
- 1 reply
- 2.7k views
-
-
Gentlemen, is it OK to use BullsEye Shellac Traditional Finish and Sealer as a sanding sealer before I stain with a Minwax Gel Stain? The orange box store did not have just the Shellac Sealer. I tested it on scrap cut 50/50 with alcohol and it looked fine. Should I go get the Minwax Pre-finish Sealer? Thanks!!!!
-
- 2 replies
- 3.4k views
-
-
I was using a dark stain on white oak. looked great then went to use general finishes satin oil poly and pulled out a lot of the stain now it looks very light. I was thinking on the next coat to put a little stain in the general finishes to try to darken it up again. bad idea, good idea? just not as happy with the finish now.
-
- 4 replies
- 3k views
-
-
I just finished staining a cabinet with GF oil based Gel Stain. Will wipe on poly smear my staining job.
-
-
- 3 replies
- 6.9k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·