Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Cutting noards,

    Hello all I’m trying to make a cutting board with turquoise inlayed I have the food safe stain and oil for the wood but my question is should I stain before I inlay or should I inlay then stain carefully?

  2. Started by JFII,

    Suggestions for steps to finish kitchen cabinet doors using oak as the frame and Maple as the panel. The stiles and rails are all cut (mitered) and with dado for panel and biscuit slots have been cut. They have been dry fitted I will be using neutral stain with some pecan mixed in. The maple panels are all cut and have been finished with 8 coats of satin clear lacquer (from a spray can) and look great. I did a test and stained a couple of the frames and glued and assembled with the panels I did get some swell around joints which was correctable but may not have been if they were also poly'd My main concern is the build up of poly around or possi…

      • Like
    • 16 replies
    • 5k views
  3. Started by Meatwad,

    I'm getting ready to create a lazy suzan as a wedding gift. It's just a simple two-piece with the top about 16 inches in diameter made from walnut and mahogany. It's a table centerpiece. After I build it my wife will paint some decorations on top, like the first letter of the new couple's last name. Since it's going to be used on a dining room table I was thinking it would need another coat of maybe water-based polyurethane on top to protect against spills and food items. What would you all suggest for the steps in finishing? I was thinking some sort of finish, then the paint, then the poly. Maybe even as simple as: Poly -> Paint -> Poly?

      • Like
    • 5 replies
    • 3.1k views
  4. Hi, entirely new to this forum and woodworking / furniture building. Based on talking to a live edge vendor and consulting the internet, I've devised the following plan for an outdoor live edge bench I'm making. Would appreciate people's feedback! Details: Maple live edge Will sit under the eaves of our house, so will be somewhat protected from water, but may get damp Will not get a ton of direct sunlight Planning on Epifanes clear varnish for first 3 coats, then Epifanes matte varnish for last 2 coats, as I'd like as much of a matte finish as possible Planning on doing this in a garage at about 60 degrees Plan: Prep w…

  5. Started by Sara,

    Hi all and thanks in advance. I bought a desk that I want to refinish into a rolling kitchen island. I sanded the top as it had only stain and not sealer/varnish. The sides and legs had a varnish over the stain so I used a stripper. Now it’s all gummy and goopy. I removed what I could then used steel wool. Still icky. Then tried mineral spirits on a cloth…bad idea?? The legs are twisty and hard to scrape. Any suggestions would be great

  6. Started by Hammer5573,

    I'm in the process of building a four-drawer chest made of maple. My plans for finishing are as follows: 1. Sand surface to #320 grit 2. Spritz the surface using distilled water in order to raise the grain 3. Re-sand the surface to #320 grit 4. Seal the wood using de-waxed shellac 5. Sand surface with #400 grit paper 6. Spray it with stain (probably water based) 7. French polish the piece Does this sound like a sound plan..?

      • Like
    • 11 replies
    • 3.5k views
  7. Started by EasyD,

    Hello friends. So, some time back, my dad picked up a large haul of gorgeous butcherblock from the side of the road. While the big slab (8 foot long) is earmarked for our new workbench, I cut and routed a smaller slab for a deck table. I've applied the stain, and I have a 2-part epoxy for the surface: problem is, the epoxy doesn't provide the weatherproofing I need. I actually used an Identical slab already, thinking the epoxy would protect it, but it only lasted a few months before the warping of the different slats made it unpresentable, so I tossed it. This time around, I'd like to get some serious lifespan out of the table (seeing as how it's so pretty). I was thinkin…

      • Like
    • 6 replies
    • 8.3k views
  8. Started by EasyD,

    Hello friends. So, I've been finishing a butcherblock table, wanting a nice appearance as well as durability. I've already poured the 2-part epoxy, and I'm on the poly, but my spar urethane has an odd appearance: it is separated into 2 layers, the top clear and dark, the bottom milky. I did pour some leftover poly, cut with mineral spirits, back in the can, so I would imagine that is what caused it. What I'd like to know is why, and is it still usable, or do I need to toss it? I bought a new can, to be safe (Rustoleum Oil-based Spar Urethane - https://www.amazon.com/gp/product/B000JQCJTK/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 ), but its appearance is milky a…

  9. Started by Murield,

    I have have tacky water based stain on new wood, how do I safely remove excess stain so I can apply my water based Polyurethane top coat. Help is appreciated.

  10. Started by Hammer5573,

    I constructed a privacy screen made of white ash for my patio. I intend to keep it covered during the winter months and expose it in warmer weather. I was told that I should use polyurethane followed by a weather protectant such as Thompson’s. Does this make sense? Does anybody have a better solution?

  11. Started by lucyt,

    Hi, and thanks for the add! I am refinishing some very old kitchen cabinets from my parents house. House was built in 1940's, and I think it was 50 yrs ago that my mom refinished the cabinets. They look like a brassy medium shade of red with a hint of brown in it. I took the cabinet pull off, and underneath the wide base of the pull, was a golden oak color! I'm assuming they were stained and the finish (lacquer?) must have really yellowed. I'd like to put a gel stain on them to tone the red down at least, not trying to darken them. I washed one, did a little bit of sanding and used some Minwax Chestnut gel stain on a spot, and it did nothing to the reddish color-l…

      • Like
    • 4 replies
    • 3.2k views
  12. Started by NoviceGirl,

    Hi, I ran into problems with my mild not holding so now I have a lot of black epoxy over flow that has stained the wood. When I go over it with mineral spirits I don't see the stain, does that mean you won't see it in my finish so I don't have to worry about sanding it out? Going to use rubio monocoat finish. TIA

    • 4 replies
    • 3.3k views
  13. Started by philip sabwa,

    Hey Guys, I have been a silent follower and only recently opened an account. I have a question but it's directed at DIY pro or generally any person experienced in polyurethane finishes. I recently repainted my tool cabinets and I had some poly left from another project that never got used again. I don't want it to overstay and probably expire so can i use this poly on top of the paint on the cabinets? The cabinet's wood is solid mahogany.

  14. Started by Ron Stewart,

    Just wondering how you keep dust off your projects when spraying. Thank You Ron Stewart

      • Thanks
      • Like
    • 8 replies
    • 3.7k views
  15. Started by Tobykanobe,

    I bought a new address sign for my property from one of those booths at the fair that makes them to order. I’m screwing it into an oak tree at the bottom of my driveway. Turned out great but I’m wondering if I need to spray it with a clear coat of something to make it look even nicer, but more importantly, last even longer. Was thinking a rattle can of some sort?Suggestions?

      • Like
    • 6 replies
    • 3.3k views
  16. Started by Dtxdude125,

    I've been looking on here to see if anyone has the same problem and it looks like they haven't. I bought this old mid century coffee table which I believe is walnut and sanded a lot of it down the other day. I decided to use citristrip to try and get the rest of the varnish off and make it easier and it has now stained my table! It won't come off at all and almost looks like I added a varnish... I've tried using denatured alcohol and mineral spirits to get it off but it won't work, please help!!

      • Like
    • 7 replies
    • 11.8k views
  17. Thank you for reading my post. I’m excited to learn more about finishing and expand my possibilities! I have an unknown to me species of hardwood from Peru. (Bought from the importer off of Craigslist) Finished with pre California ban Waterlox original and satin. It is very “orangey” and sometimes red like a Sapelle. I’m aware that I will need to go to bare wood to attempt a color correction I’ve eliminated stains as a possibility. Samples look very artificial. I have allot of this lumber and would like to find a solution and reinstall it. I am actively investigating using dyes (water or solvent?)and possibly a 2 part bleach to change the…

    • 2 replies
    • 4.1k views
  18. Aloha! I recently hired a guy to seal a few large posts around a pool cabana asking him to match the ones on the main house lanaI, matte, natural color of wood. I'm guessing he just used whatever he had in his truck which seems to be a marine grade high gloss poly. I gave it a couple days hoping the shine would dull when dry but no such luck. It's been almost 2 weeks and still slightly tacky too. I know I should try and get him to correct it, especially for what he charged but sometimes you just want it fixed without a lot of hassle so going to do it myself. so..... How do I go about sealing it with a matte? Do I need to strip off the gloss or can I paint it on top?…

      • Like
    • 4 replies
    • 3.6k views
  19. Started by WGR,

    I have outdoor teak wood furniture that has turned grey. My understanding is that I should sand with 220 grit and apply an oil to preserve the wood. Anyone have experience?

      • Like
    • 8 replies
    • 3.2k views
  20. Started by Kevinartman,

    Hi everyone, I could use some advice. I took on a job as a favor to Father in Law. Two L and J.G Stickley side chairs that had been painted white, stripped(probably dipped), and than coated with latex polyurethane. In the photos you can see my problem. I sanded relentlessly from 80 to 180 and thought that I could cover up the white in the grain with paste wax after the Dye, sealer, stain and Waterlox. The photo shows the oak after the Dye. Any suggestions?

      • Like
    • 12 replies
    • 4.7k views
  21. Started by Tom King,

    I stumbled on the fastest, and easiest way to perfectly cut in casing, and baseboards this morning. I put up a new ceiling, and needed to paint the Dining Room in a lake rental house. I had watched a youtube video titled something like "caulking your masking tape", and decided to give it a try. I'm probably fairly good at cutting in with a brush, especially on casing, but the top of a baseboard is no fun for me. I've tried several types of masking tape, including Frog tape, as was used in the video. I've never been That impressed with Frog tape. The caulking method involves putting caulking over the working edge of the tape, painting over it while it's still wet, an…

      • Thanks
      • Like
    • 14 replies
    • 4.3k views
  22. Started by Crimson0087,

    I have oak that's riddled with holes from bugs. I need to fill them.. I plan to stain the project a dark color...I've seen stuff where people mix Sandi g dust with glue but if I o this it probably won't stain...I wondered...could I get sawdust and mix it with my stain and let that dry...then mix that with glue and fill the hole? I also considered clear epoxy after staining but the stuff I have isn't runny enough to get it in the holes .....I've tried before...

  23. Started by Dyami Plotke,

    I'm rush to finish a wedding present be Thursday (tomorrow) morning. I'm finishing it in my air conditioned shop on Long Island. In the shop, its in the low 70's. Outside it's been in the high 80's and low 90's and very humid. I put a wash coat of 1/2 lb shellac on Monday night, and it dried fine. Last night I rag applied a 50/50 polyurethane / mineral spirits blend. Now, 10 hours later, it's still too tacky to sand. I turned the AC up, thinking that will drop the humidity in the room. Anything else I can do add to the mix to increase speed time? I need to install 4 coats in the next 18 to 24 hours. Thanks for the help.

      • Like
    • 15 replies
    • 63.4k views
  24. Hello. Thanks for any help in advance as this is driving me nuts! Using my orbital sander I seem to get sanding "stripes" from the leading/trailing sides of the sander. These are showing up through the finish regardless of what grit I sand up to. To answer some questions ahead of time. Yes I am sanding with the grain (though it happens if I don't too), I'm following the 1 inch per 1 sec rule and it seems to happen if I over lap sand or not (obviously I get more "stripes" the more I overlap). The wood I am working with is maple. In the picture attached the lines I am talking about are the black lines (4 of them) running north to south. The line are not "b…

      • Like
    • 22 replies
    • 12.3k views
  25. Started by Wesley,

    I had European walnut butcher block installed 10 months ago and they only used a single coat of osmo top oil wiped on.needless to say it’s really wearing in some places. im not sure what to do now as I’ve heard osmo top oil might not penetrate walnut well. I’ve been told by some to just lightly sand and add a couple more coats of top oil. Ive also been told to use the top oil with a slurry technique, sanding it in. I’ve also been told to switch to polyx or extra thin wood wax finish. many advice? I’m a novice in all this and don’t want to mess it up too much

      • Like
    • 4 replies
    • 5k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.