Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Hammer5573,

    I'm completing work on a walnut jewelry box with an oval shaped inlay on the lid. Apparently I didn't notice that I removed too much material from one end under the inlay before the glue up. Now the inlay doesn't sit level, one end is noticeably deeper (about 1/16"). I'm planning to French polish the box and before I start over making a new lid I was wondering if I could use thick, uncut shellac to level it out ….?

  2. Started by Ron Swanson Jr.,

    Howdy Does anyone have experience or advice on prepping and finishing leopardwood? I have a small piece that I'm planning to use as the floating panel in the lid of a small keepsake box. When I took a smoothing plane to it... The little spots don't exactly plane well as they're harder than the wood that surrounds them. For boxes like this I typically use an oil finish (I really like Gen Finishes Wood Bowl oil, so that's probably what I would like to use) with some wax on top of that. Anyway, I don't have much to experiment with, so I'm hoping for some guidance. Thanks in advance!

      • Like
      • Thanks
    • 5 replies
    • 8.5k views
  3. I am very much a hobbyist and very much have a hobbyist budget. I have seen a lot of videos on, "Getting started with HVLP," and some of them are great. But... there are three aspects of an HVLP system that I'm finding difficult to parse out. Air compressor size and specs Connectors between different air hoses and components Nozzle size I have no aspiration to some day be spraying dozens of pieces all throughout a day. My needs are incredibly small. The largest thing I'd ever need to spray might be a book case... and even then, I'd only spray something once or twice a month max. So, I am pretty desperate to keep my investment as low as humanly p…

      • Like
    • 6 replies
    • 4k views
  4. Started by Check Twice,

    I built these chess boards several years back and forgot I had built two, seems to be my thing to build two of something. The first was built with oak and walnut and I do like purple heart for trim just a very vibrant color when finished. The second was built with birch and walnut again with the purple heart. The second I gave to my oldest son 18 - 20 years ago (now 52) as we both enjoy chess. The first I can't remember who got it as it was built first not even sure how long ago. I had a habit of using up small scraps for small projects, waste not I say. BTW my two son beat the pants off me in chess now. My children and grandchildren got a lot of my projects. The s…

    • 2 replies
    • 3k views
  5. Hello all. New guy here and first post. I am in the process of remodeling my kitchen and one of the things I'm doing is building new doors and drawers from my cabinets. I have a few questions regarding the finishing of the drawer boxes. The sides are solid 5/8" soft maple and the bottoms are 1/4" maple plywood both of which are unfinished. I am using Blum undermount slides which require certain dimensions, notches and holes for proper fit and mounting of the slides. As such I believe that the drawer bottoms need to be inserted into the drawer boxes during box assembly and glue up. They cannot be removed after since the back of the box captures the bottom in th…

    • 7 replies
    • 4.3k views
  6. I know that we are totally crazy but we just purchased this beautiful indoor Restoration Hardware table to use on our patio outside It will be exposed to all the elements including humidity as we live in southern CA about 4 miles from the beach. RH website says that it’s an unsealed salvaged solid pine. Could you please help us understand how to seal the table to at least partially protect it from rain, sun and humidity. Thank you!

    • 3 replies
    • 4.4k views
  7. This is our first set of cabinets painted white using our MiniMite 5 spraying lacquer. We spray one undercoat/sanding sealer, sand, then two finish coats. On a few of the cabinets, small pinholes in the paint will show up on the last coat when there wasn't any sign of a problem on the first two coats. It isn't bubbles. Anyone know what is causing this? Also, I don't think the gun is atomizing like it should. We have tried different tip sizes, fluid pressure, air volume, thinning ratios, etc. Any suggestions on that?

      • Like
    • 15 replies
    • 4.5k views
  8. Started by Kayellluh,

    I’ve had this table for a mere 4 months and there is already damage to the finish. It’s an IKEA dining table and I think what happened was condensation from my coffee cup combined with the fabric of the cozy it was in adhered to the table and took the finish right off when I took the cup off of the table. my question is, what type of paint can I use? Should I sand the whole thing down and repaint? Should I just sand the effected area and spot paint? Would Minwax polyacrylic be okay to seal it up?

    • 2 replies
    • 3k views
  9. Hey everyone, this is my first post here. I'm new to this forum and even newer to woodworking. I just picked up a new Delta table saw, got it all set up this past weekend, and for my first "project" I'm planning on making a couple kitchen shelves. Since I'm just starting out, I plan on using dimensional SYP from my local box store because I don't want to be out a bunch of money if (when) I make mistakes. From what I've read, it can be a little tricky to get a good dye/stain on pine because of it's "grain" structure that accepts the dye/stain at different rates. So what are your recommendations for a good finish for a kitchen shelf? I've heard good things ab…

      • Like
    • 13 replies
    • 11.4k views
  10. Started by Taco77,

    I accidentally put one coat of interior polyurethane on an exterior Cedar table I just made. Can I put exterior poly over it or do I need to sand off all of the Interior poly?

    • 1 reply
    • 3.6k views
  11. Hi, I'm making a Side grip for a camera out of purple heart wood. I'd like a durable finish that retains the color. What should I buy?

      • Like
    • 1 reply
    • 3.2k views
  12. Started by Cubist Woodworker,

    I just finished a dinning table centerpiece prototype using cheap pine board finished with Watco Natural Danish oil. I'm now about to start another copy using cherry. I really liked the simplicity of the Watco finish so I thought of trying the Cherry version of their Danish oil. Does anyone have experience with Watco Cherry Danish Oil on cherry wood?

  13. Started by Mary Halada,

    We have a “hot Tub” room at our house with cedar on the walls - for about 30 years. Several years ago, I left the cover off the hot tub overnight and the result is “drips” about 2-3 feet from the floor, down the walls. These “drips” are darker than the wall. We tried to sand one off and it didn’t seem to impact it. The cedar walls were initially finished with a danish oil, I believe. Suggestions on how to remove/cover these drips?

      • Like
    • 7 replies
    • 7.3k views
  14. Started by justaguy,

    I want to try a Target finish for a dining table going into an RV. It will be exposed to warm plates, water, alcohol, and sunlight. I tried calling Target for guidance, but got an answering service with no call back in three days. I am thinking EM8000 with crosslinker If it matters, the center of the table is maple with a thin wenge accent stripe, with cherry outer end

    • 0 replies
    • 3k views
  15. Started by Anders,

    This is my first bartop ever built. It's going to be in a screened in porch, so I'm using spar varnish to give it max protection. I've got 4 coats on the top done and as you can see I've still got this pesky gap on top. I was told that the spar urethane would just fill the gap.....well I'm sorry I listened to that advice because that's not happening. If I want to seal this gap without starting over what are my options? I thought of taping it off and running some epoxy in the gap, and then maybe sanding and varnishing for a final coat. Any help is greatly appreciated

    • 5 replies
    • 4k views
  16. Started by roldogg,

    I’m making a waterfall river table with a walnut slab I found with some really unusual grain, what I like to call crotch rot. The slab was cut from the trunk of a tree, where a limb was growing from, and the slab was an unusual shape with holes throughout the piece. So, I ended up cutting it in half, flip the live edges towards one another, and I had to flip one side 180 degrees in order for it to be the size I wanted. I’ve already filled the voids with epoxy, along with the center “river” portion. I’ve also sanded the epoxy down to 2000 grit and taped over it so I can focus on the wood finish. I’ve gone over it with 220 grit sandpaper in some areas and a cabinet scraper …

      • Like
    • 8 replies
    • 3.9k views
  17. I got a friend that want's me to make a wooden head piece for his parents grave out of a 24x18x3" Hawaiian Milo slab. Instead of setting on a slab on cement like a headstone he plans to hang it from frame like a sign so he can easily take it off to maintain the finish. I do some CNC work and know little about finishes but even less about outdoor finishes. Paint is not an option and he is not a woodworker so I want to set him up with a finish than isn't too had for him to maintain but looks beautiful and hope fully protects the Milo color which tends to turn gray in the sun. I don't think he'll have an issue with needing to refinish several times a year but I wonderin…

      • Like
    • 6 replies
    • 3.8k views
  18. I have read several threads on this and other forums on HVLP as well as hundreds of reviews on dozens of sites. I talked to a Fuji rep for about 20 minutes and he says the setup I am thinking of getting will work fine. I still wanted to ask opinions here about it. I am 99% convinced to buy a Fuji 5 stage and run a 10 quart pressure pot to feed material instead of the supplied cup on a T70 gun. My son and I will be spraying lacquer based clear coat and paint on cabinet parts and doors. (We finish the cab parts before assembly.) We will have a dedicated paint room with good exhaust system to handle fumes. To a point, I am more concerned with a good finish than speed. …

  19. Started by Dave S,

    A while back I picked up some Enduro Var from General Finishes. I used it on a number of projects and liked it. However, it does not add the rich amber color that an oil-based finish does. The directions say it should only be used over water stains, dye stains and raw wood. I tried it once on an experimental project for myself over an oil based stain, giving the stain seven days to cure. I’m about three quarters of the year in and everything seems to be holding up. The project I’m working on now is with walnut and I don’t want to use a stain, but don’t want to go straight Enduro Var because when I’ve used it on walnut in the past it fails to produce that deep warm br…

      • Thanks
      • Like
    • 14 replies
    • 5.2k views
  20. Started by Kimberly Cates Meraz,

    We purchased a teak table and chairs at the end of January, and sometime in Feb we applied a tung oil to preserve the beautiful natural color of the wood without a shellac finish. The wood is continuing to darken and gray...and looks uneven now. We would like to get it back to the golden, natural finish and don't know the best way to do that. We don't want to damage the wood. We've found some VERY expensive solutions online, but one sounds like its going to bleach the wood to a whiter color. I don't know much about refinishing but I can follow directions. See attached pictures. Thanks, Kim

  21. Recently upon making a gunstock out of A grade English walnut, I began the finishing process using traditional English methods and mixtures . I first applied coats of 100% boiled linseed oil with alkanet rood dissolved in it to deepen the color and enhance the grain. After this I began applying finishing oil consisting of boiled linseed oil, turpentine, Venice turpentine, and carnauba wax. Again this is a traditional proven mix. I applied over the course of a month in very thin layers massaging it into the wood. Now after a month some blotches seemed to have surfaced. Could this be moisture that the oil is drawing out? Do you have any solutions?How do I fix this?

  22. Started by pridmore,

    All- Just a hobbyist here with no spray finishing experience, but am currently building bathroom vanities for a master bath remodel in my home. My wife wants gray cabinets, so I'm going to make them gray. Instead of paying the trim folks to paint them, I think this will be the perfect time to invest in a spray system and do them myself. Can I get opinions on the systems out there/that you've used? I don't have or want a big compressor, so a HVLP seems like the way to go. I want this to be my paint/clear finish solution all-in-one. I only seem to accomplish a few projects per year. I am very comfortable in the $400 - $600 range, but biting off $1k for the Fujis m…

      • Thanks
      • Haha
      • Like
    • 10 replies
    • 4.5k views
  23. Last year I was fortunate enough to come across an Anco Bilt drafting table for $20 at a church rummage sale. (I've only ever dreamed of using one of these for my illustration, so happy birthday to me!) Now with so much time on my hands, I figured it was time to start refinishing it. Now, even from my untrained eye, I can tell it needs some TLC - the frame and hardware seem in very clean condition, but the table top panel has seen some neglect. It's riddled with discolorations, pencil grooves (whoever was tracing/cutting seemed very heavy handed) and what I can only assume are cigarette burn marks along the main working area. Due to these numerous imperfections, I'm…

      • Like
    • 3 replies
    • 3.7k views
  24. Started by Ed Yadlowsky,

    I live in southwestern Virginia and have an Ipe (Brazilian hardwood) outdoor deck. This wood is very dense and oily making penetrations and adhesion problematic. I have tried oil and film type finishes(Sikkens) with limited success. Marc Spagnuolo suggested an epoxy sealer followed by a marine varnish for a table he was refinishing. Is this appropriate for a Ipe deck? He also refers to a CPES (whose source he does not specify) which has a better penetration. Epoxy distributers indicate that epoxy is not suitable for outdoor applications because it does nor expand with changes in temperature. I need suggestions for a suitable approach.

      • Like
    • 12 replies
    • 8.6k views
  25. Started by CustomGlove,

    First post here as a brand new wood-ruin-er. Hopefully graduating to woodworker. I am making a set of corn-hole boards and they have gone out of control. I ended up engraving sports logos on them and proceeded to fill with Enviro Tex Epoxy. I picked it up at my LHS before I realized there were way better options for woodworking resources. After filling with the epoxy I covered with Minwax spar varnish and after 2 days the Spar is still tacky only over the epoxy. It just doesn't seem to be curing. I found this thread. So it seems like it is possible, but i'm not quite sure how to proceed at this point. They need to be finished by Sunday so i know im pretty …

      • Like
    • 22 replies
    • 34.4k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.