Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Dmom,

    My daughter got heavy handed with the Lysol while disinfecting a delivery and unknowingly sprayed the front of antique desk. Woke up to the finish now is spotted in areas. How can this be fixed?

      • Like
    • 7 replies
    • 4.1k views
  2. Started by aliebling,

    I've glued up a zebrawood and wenge desktop - it's 60"x30"x1.5" with parallel zebrawood for the majority and 3" of wenge border on all sides. This is for a work desk - mostly computer usage with some writing on it. It will see definite use (and the occasional cat running across it!) and I'd like a relatively durable but satin/low gloss finish. I'd like the zebrawood to be high contrast (light background not too brown and dark stripes) and the wenge to be dark (relatively little pattern visible) but not shiny/gloss or ebony-like. Given this, does anyone have any recommendations on the best way to finish? This is also the first time I've finished a mixed wo…

      • Like
    • 20 replies
    • 7.5k views
  3. Started by Tom King,

  4. Started by Joan McElroy,

    I am finishing a Catskill kitchen Island with Danish Oil this the first time I have used it I keep getting dry spots I have applied and applied but the just don't go away. Am I not allowing enough time to cure I have been applying a coat everyday. Help Please.

      • Haha
      • Like
    • 10 replies
    • 4.4k views
  5. Started by LSommer,

    PLEASE: IF responding to this post, do NOT tell me why Tung Oil is bad, and other finished are better, or to sand everything off and use Poly or Varnish instead. I have used Tung Oil MANY times with great success, and this is my first problem. I am mid-way through this project, and am only interested in replies from those with experience with Tung Oil that address what I should do NOW to fix it. I'm finishing a table with Acacia/Rubberwood butcher block type top and it seems that the large pores of the Acacia are giving me trouble. I followed the usual steps I always do: flooding with 50/50 Tung/Citrus Solvent for the first application, 75/25 for the 2…

    • 16 replies
    • 10.4k views
  6. Started by Larry Moore,

    I need some help on how to remove these marks from bubble wrap. The biggest problem I have is the tables are in AZ and I'm in MI and can't even touch them. The finish is a wb poly that had set for two days before I wrapped them in bubble wrap and shipped them to my client. The fix has to be something an armature can do. Or I'm going to have to see if I can find someone in their area I can have do the fix.

  7. Started by aliebling,

    I'm finishing a walnut and cherry bench and it looks fantastic everywhere except the top of the bench. On the top, there are a number of lighter areas - like maybe I sanded through? Finishing schedule was: Light coat of zinsser bullseye lacquer on the dovetails and through tenons to prevent glue stick during the assembly/glue up 2 coats crystallac grain/pore filler a light coat of tung oil 2 coats of zinsser bullseye lacquer arm-r-seal - so far two coats of gloss (planning on finishing with a coat of satin). I originally thought the light spots might be dust in the finish so I carefully stripped the top (I think to…

  8. Started by freedhardwoods,

    I don't think our spray system has been atomizing right ever since we got it. Whatever we are spraying hits the work piece looking slightly textured, but has always leveled out to look good. About 4 months ago, we sprayed a kitchen with Axalta white pre-cat lacquer and it came out fantastic. Between then and now we sprayed Axalta pre-cat clear over stain and it worked great also. Over the past week, we have been trying to spray gray and can't get it to work right consistently no matter what we try. With the white, we mixed 8 oz of butyl acetate per gallon. The clear we sprayed undiluted. Our supplier has told us all along that diluting too much would cause probl…

  9. Started by Mark J,

    This was a good article on blotching I saw elsewhere and meant to repost here. https://www.popularwoodworking.com/finishing/how-to-control-blotching/#:~:text=The Cause,the surface of a board

      • Like
    • 3 replies
    • 3.5k views
  10. Started by LarryJ,

    Trying to rescue a yellow balau wood patio chair that was in my neighbors garbage pile. One of the chairs was too rotted to save. I've sanded all the surface mold/mildew and rot, but water staining remains, as well as cracks. What's the best finish to give this chair a descent look and help preserve the wood. [url=https://flic.kr/p/2jFUwp3][img]https://live.staticflickr.com/65535/50334705792_06f7cedf0e.jpg[/img][/url] [url=https://flic.kr/p/2jFTzww][img]https://live.staticflickr.com/65535/50334521206_6e064fc264.jpg[/img][/url]

  11. Started by pkinneb,

    Anyone had a finish can start leaking from the bottom Went out to the shop to find this nice little mess It was a gallon can of General Finishes Waterbased Poly I was able to save about a quart and a half so only lost about a quart.

      • Like
    • 4 replies
    • 3.4k views
  12. Started by ZoeyG,

    Hi everyone, A newbie here. After watching online tutorials I decided to use GF gel stain to refinish our orangey oak dresser top. I found a perfect solid oak table on the side of the road for practicing. I sanded the finish on the tabletop with 220 orbital sander, not completely to raw wood, just to smooth it out. Then I wiped the dust off and wiped again with mineral spirits. I applied 3-4 coats of GF gel stain in Antique walnut using wipe-on - wipe off method, in sections, waiting about 1 minute before wiping off. The painting conditions were perfect, temperature and humidity-wise and it dried quickly. The top looks awfully blotchy. I tried using mineral spirits t…

      • Like
    • 6 replies
    • 6.6k views
  13. Started by WcW,

    I recently bought a mid-century modern sewing machine cabinet/desk and matching stool. According to the catalogue page, the original finish was likely mahogany—albeit quite orange in appearance. The finish wasn't what I was looking for,* so buoyed by my previous two projects involving cabinets (oak both times), I thought stripping and refinishing this pair would be a no-brainer. Wrong! The desk has large blotches throughout (pic 1). I used a chemical stripper, circa 1850. Is this something that can be fixed by trying to strip these areas again? Or is it due to the age of the wood or something else that is beyond my control? The stool did NOT have blotches; …

      • Like
    • 3 replies
    • 3.6k views
  14. Started by MookoTheKing,

    I just had a new set of stairs built and put in by my contractor and now I'm staining it myself. The treads are unfinished red oak, so i sanded it, applied pre-stain conditioner and when I went to apply the Minwax dark walnut oil based stain, there was one spot on the treads where the stain just would not penetrate. The rest of that particular tread took the stain fine but just that one spot where it didn't and still has that unfinished wood look. What would cause that and how do I get it that spot to absorb the stain? Do I need to re-sand that spot and clean it with something?

      • Like
    • 5 replies
    • 6.2k views
  15. We have had reports of StopLossBags® developing blisters on the outside of the bag when used to store Zinsser® shellac. This may be because of the inclusion of isobutanol, a type of alcohol, in their formulation. Behlen's Behkol, which we understand is no longer available, can also cause these blisters. We have put an alert on our website regarding several solvents, as well as shellac. If anybody has had this experience, we wish to replace the bag(s) on a two-for-one basis. Please send a photo of the bag(s) you've had this problem with as well as your shipping address to: stoplossbags@gmail.com. It is our firm desire to supply products which are of genui…

  16. Started by Tom King,

    Especially if you are spraying outside. Turn the tip around, and spray what's in the line back into the can, using water to push waterbourne through. As soon as you see it thinning out, or losing color, stop. A little bit of water won't hurt a thing. If I'm outside, with the tip turned around, I spray the now thinned down remnants in the hose out of some grass. Stop, and put some clear water in the bucket you are drawing out of, and rinse off the pickup with the hose. Keep spraying until it comes out clear. The stuff on the grass will be gone the next cutting, or second if it's short, never to be seen again. If you are going to spray again tomorrow, or a fe…

    • 0 replies
    • 3.1k views
  17. Started by Mikericks,

    I finished some cherry with rattle can shellac and it came out great ! Both fast and easy. Is there a down side other than cost.? I don’t see a lot of talk/interest about rattle can use. what about rattle can lacquer ? Seems like it would be a good finish solution without a sprayer setup. please share your experiences.

      • Like
    • 4 replies
    • 3.6k views
  18. Hi! In some desperate need of experienced opinions. We are in process of buying new house and before we move in, we would like to refinish the floors. I was hoping it was an easier wood to work with like oak so we would have more flexibility with look but turns out it mahogany. So a high quality, last forever hardwood but with a look I am not fond of in its current state. I am having some trouble understanding what this wood would look like in its sanded down, bare state. And also what our options would be for staining. Is this possible to go very dark like ebony? I am guessing the blonde look is out of the question. And since there are three species or fi…

      • Like
    • 5 replies
    • 3k views
  19. Started by Bob Burwell,

    This is ponderosa pine 26" diameter that is going to be a table. Is there a way to intense the grain? I do not like the look of the torch method. Final finish will be an epoxy pour as it will outside at a lake house. TIA for your help

  20. Started by tomy josif,

    i just bought some sc johnson's paste wax at home depot when i got home i opened the tin and it was of liquid constant. is this normal? i have never used or bought paste wax before.

      • Like
    • 7 replies
    • 3.2k views
  21. Hi. I'm looking for some guidance on finishing epoxy river tables. I know there are a ton of videos online; I've watched many. But my results were not as expected. I have a small table (really just a test since I had never used epoxy that my daughter now wants for an end table). As recommended in a couple of videos, I sanded it all down to 320 and used two coats of Osmo Polyx, but I had a lot of scratches on the epoxy. It was also overall fairly cloudy. It was always meant to be opaque, but this was cloudy from the finish. So I decided to wet sand the whole top to 1500. Naturally, that also took off the Osmo Polyx from the wood. Even wet sanded at 1500, the epox…

      • Thanks
      • Like
    • 12 replies
    • 34.6k views
  22. Started by rherald1951,

    i could use some advice on finishes that are safe to use in an unventilated basement shop. i have a jet air cleaner and good masks. there seems to be no easy way to run ventilation to the outside. i suppose i could wait till summer and then apply finish to what i have built but i was hoping that someone out there who is in a similar situation and could help. thanks very much rjherald

  23. We used a big old slab of bowling alley to top our island and I like it just fine except that we poly coated it and repeat exposure to salt (I'm a chef) and heavy use has left the finish kind of sticky and impossible to really clean. We're going to strip it, but I want to coat it in something that can handle high heat and excessive amounts of salt (and butter, and flour and the like). We've considered a pour over epoxy, but I'm hearing it can get permanently sticky if exposed to heat. Once I dig into specific products, it gets verrry confusing. Any thoughts?

  24. Started by jshed,

    Hi. I'm refinishing a vintage (1950s) table. I've stripped the old finish off of it and been sanding it down and but i'm seeing the darker areas and I'm not sure how to proceed. Any advice or information on what I'm seeing is appreciated.

      • Like
    • 11 replies
    • 3.9k views
  25. Started by JaceUnicorn,

    Table i scored a gorgeous oak table from a friend and the top was really dried out and sad. I applied two coats of danish oil yesterday, following the directions on the van which I now realize was a bad choice. Most of the table is ok, but there are some tacky spots. I’ve read I can use olive oil to help it rub in a bit? Or should I just give it a couple more days and then put a top coat of sorts on it?

      • Like
    • 2 replies
    • 3k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.