Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Megan U,

    Hi there- looking for some guidance and or to hire professional help down in Florida! Have antique doors built our for pantry. Looking for best way to maintain the raw sanded wood color on the antique doors, then plan to use Rubio Monocoat to match color on new trim. Ordered about a dozen sample colors of product and settled on Oyster. Put on door yesterday and do not like how much it darkened the wood. Would I be better off doing some type of super fine sanding method with Paste wax? Feel like I have searched online until I am cross-eyed how to achieve raw wood look- think my next try is Sherwin Williams CAB Acrylic Laquer or paste wax of some sort....

      • Like
    • 2 replies
    • 2.9k views
  2. Started by Cdlong,

    Given the current climate, we can't get tortillas so one item on my honey do list just got bumped up a ways, making a tortilla press. It was at the "meh, if you ever get to it" position on the list, now it's near the top since I think I have all the material I need. What I don't have is some food safe finish to coat it with. I'm not going to go out to buy anything so I have to work with what I have. That consists of various oil and water based polyurethane and some spar urethane. I could probably put some mineral oil on it, or just leave it bare for now and use some wax paper or silicone baking mats temporarily until I can get something appropriate. If the latter, an…

      • Like
    • 7 replies
    • 3k views
  3. Started by moogs,

    Hey there, Rather new to woodworking and finishing - have some small projects I wanted to try out before I dove in head first. I'm a big board gamer and I have a few wooden inserts for some of my game, made by the folks over at the Broken Token. The inserts are made out 1/8" baltic birch and sanded, then laser cut. I'd like to finish a few of them in a dark ebony type stain, but my first few attempts have looked miserable. Lighter stains seem to work better, but there are a few I'd really like to do some high contrast light/dark stains, but the ones I've tried just don't look that good - to the point I'm almost considering just painting them. I've attached a…

      • Like
    • 12 replies
    • 18.2k views
  4. Started by Larryfrombarrie,

    Can you put walnut oil over a mineral based oil I started a countertop and ran out of Lee Valley Salad Bowl Finish (do not carry it anymore )as it took more coats than anticipated and need to go over it with anther product Suggestions

    • 2 replies
    • 2.9k views
  5. I have attached two photos of the wood I'm looking to finish. The cherry mantel is 8' long by 8" deep and 3" thick. I have been browsing this site and I think my best bet (ease of use and quality finish) is to use arm r seal. Any comments on this? How many coats? Sand between coats? How long should I wait? Right now its sanded to 220 all around. This other piece is going to be my dining table. It's a 2" thick walnut slab. I have someone that can sand this whole slab down for me to whatever grit I tell him and I'm confident I can finish it if I'm given direction. I have a steel guy that I use so he will make the U shaped legs of no 4 finish stainless steel 1" x …

      • Like
    • 25 replies
    • 9.2k views
  6. Started by Mark J,

    Anyone ever try using computer duster spray as a substitute for Bloxygen? My can says its difluoroethane. Don't know if that's inert, but it's not oxygen.

      • Like
    • 5 replies
    • 3.6k views
  7. Started by Mark J,

    So I'm ready for surface coating of this most recent turning project, which is made from a block of teak. I may end up tackling this tonight, but certainly by tomorrow so I'm hoping for a few quick thoughts from the herd. First, what are your thoughts about just leaving the teak bare? The butternut top will get varnished. If I apply a surface coating it will be PU varnish (gel). So as the teak is oily I would wipe it down with mineral spirits first. But how long is that wipe down good for? I need to write on the bottom of the thing so the MS has to go first and then get pretty dry before the pen is going to work. And I'm also thinking I may wipe the who…

      • Like
    • 6 replies
    • 3.1k views
  8. Started by Dave S,

    Good morning all. Brand-new to the form, and hope I can tap your collective wisdom. I am building a dresser out of walnut with hard maple drawers and glides. When I pull the drawers in and out they slid very nicely over the sanded drawer and mounted glides on the case. My question is should I apply finish to these parts that are gliding smoothly now or will that muck things up. Never built a dresser before so not quite certain how to proceed.

  9. Hi I Have to say, I am pretty new in pro woodworking so looking for your help. I have made previously some speaker boxes, veneering, etc. (they came out very elegant), but here I am stuck and do not have experience how to proceed. I receive VERY GOOD, NICE high end Denon DP60L turntable from US, but unfortunately shipping damaged couple of corners. They look soo bad, I can glue them, but still whole turntable looks then still damaged. Bought new dustcover also, which also got damaged. Damn!! Final goal is I try to get it back into mint condition So, turntable plinth is covered with magnificent rosewood (palisander, santos) veneer. It is very thin, so it l…

    • 0 replies
    • 3.6k views
  10. Started by dvanvleet,

    Ok, I keep having some kind of an issue with glue lines; this may be a bit long, but I'm going to try and cover all the details. Here's the summary. I have noticed that after I glue, say a table top, I let it dry overnight. Then I typically sand from 100 grit through 220 so the top is super smooth. I use a raking light to ensure all glue is off the surface. I then use either OSMO or tung oil as a finish; usually two coats. What I have been noticing is, a week or so after the piece has been sanded, finished and dried, I can feel a micro line protruding on the glue seam; you can catch it with your finger nail. Some important notes: the wood is dry, 10% or less …

      • Like
    • 7 replies
    • 4.3k views
  11. Started by curlyoak,

    I think that means water base. Doesn't have to be. The requirement is a non amber varnish on q/ white oak. Kept as light as possible. Please express your favorite high quality brand for this task. Thank you.

      • Like
    • 3 replies
    • 3.2k views
  12. Started by rodger.,

    Getting into the world of HVLP lacquers (water based) as I need some "painted" pieces. I am an experienced HVLP sprayer, mostly using high performance poly by General Finishes (through the Earlex 5500 spray station). I have done quite a bit of reading, and have a copy of the technical data sheet. It does not specify the tip size for HVLP sprayers. I have a 1.5mm and a 2.0mm tip, and there is a 1.0mm tip available. Any advice for sprayer water bourne pigmented lacquer?

    • 6 replies
    • 3.2k views
  13. Started by socoj2,

    So Sherwin in their infinite wisdom only sell the Kem Aqua top coat in 5 gallons. It will take me for ever to go through 5 gallons. What should i spray over Kem aqua Plus white?

    • 2 replies
    • 3.5k views
  14. Started by blessed grandma,

    We have a 20 year old main dining table that needs some refinishing but the old finish when it gets a water mark the mark just disappears in a short time is there anything like that available?

      • Like
    • 5 replies
    • 3.5k views
  15. Started by trainum,

    Hello I am a newbie when it comes to live edge coffee tables. I was able to get some magnolia wood that is 22"-24" wide 8/4 thickness(or 2" thick) and 11' long. I cut the board into 3 pieces to make coffee tables. Around 44" long all three The magnolia was milled over 25 years ago and cured by a friend that owns a sawmill. Question1. I have not planned the wood yet but there are some other smaller pieces that have been planned ans sanded. looking on the internet also the magnolia seems to be lighter colored with a yellowish tint. The grains seems to be dense and straight. It looks great I attached pictures. the coffee tables will be Xmas gifts could u recommend an o…

    • 4 replies
    • 7.5k views
  16. Started by wellohkay,

    I'm not sure what style to call these steps, rustic is the best I could come up with. As you can see, some of the steps are not holding up too well. Small pieces of wood come off each time someone goes up or down the stairs. I'm needing recommendations on refinishing and sealing the steps so that they are more durable. These steps are in an office and get daily use.

    • 7 replies
    • 3.1k views
  17. Started by CandorLush,

    I am working on figuring out my finish the metric S-ton of sapele for this project and thought I should ask for some ideas and/or make sure I am on the right course. I am about to make up some sample boards which I will be doing in thirds; Bare wood, pore filled with Aqua Coat Clear, and pore filled with Timbermate Mahogany. I am planing on doing the following: 1) Wacto natural Danish oil topped with spray lacquer(rattle can, probably Watco, I don't have HVLP) 2) Wacto natural Danish oil topped with dewaxed blonde shellac (The project won't end up being shellac but since I will be finishing already....) 3) Arm R Seal 4) Enduro-var Anything else I should ei…

  18. Hi, I am working on a project for little toys for kids in Europe. Those tiny objects must endure a test where they will be plunged into a container with boiling water (100° C / 220 ° F) for 10 consecutive minutes. Then some chemical tests will be run to check some element migrations on other part of this toy (in latex), so while boiling, the varnish shall not release any toxic component that could transfer onto the latex parts. I have to go through this specific test to get the regulation approval ! So I have no other options to find the solution. It has been a while I am looking for such a product online, but so far, nothing's match this test. Do…

  19. Started by bsoder,

    I am in need of some advice before I finish up the table I'm working on. The top is birch plywood, sanded with 220 and cleaned, but nothing else so far; I figured it's a lot easier to get advice before I do anything I shouldn't, rather than try to fix it after I've already made a mess. I am staining it to match a set of chairs, and I had Sherwin-Williams match the stain color for me. The product I got from them is SHER-WOOD BAC Wiping Stain, which is oil-based, and they recommended I apply it by HVLP; they did some testing on a piece of the plywood I'd provided for matching and found that spraying it was giving them the best finish. From doing my own learning, it …

  20. Started by Chickenma65,

    I am applying polyurethane to the top of a table and I am using a white tee shirt but keep getting lint crazy all over the table. What am I doing wrong? Is there such thing as lint free cloth? The table was cleaned and free of dust before I put it on. I tried a brush and it was bubbles all over. I put on a thin coat. I don’t know why I am having such a problem. What do I use to put this on? And how do I put the final coat on if I have to keep sanding because of the lint?

      • Haha
      • Like
    • 13 replies
    • 7.7k views
  21. I bought 4 beautiful VG fir interior doors from the salvage yard and worked on reconditioning them. Most had dings and scratches but the rest of the surface was ok. I used the orbital sander with much more dedication in the problematic areas and less on the rest. I went for the BLO as a finish and it looks splendid, with the exception of the franticly sanded areas. The wood is much more opened there and it gets immediately absorbed leaving the area lighter in color. What do I do? Do I keep applying BLO to these areas until they even out with the rest of the door? Thank you, Sofia

  22. Started by hg930,

    Hi everyone, Hoping someone can help me out here as I am clueless and don't want to ruin an expensive piece of wood! 18 months ago we had a large wooden shelf installed. It is made of beautiful oak and was treated with Danish oil at the time, but hasn't been treated again since. Now we have got new flooring in the room where the shelf is, and the colour of the oak looks wrong with the floor. Is it possible to stain the oak shelf a darker colour, or will the stain go on unevenly/not at all because of the Danish oil? Would we need to strip or sand the wood? Or is it just impossible and we will have to keep the oak shelf as it is? If anyone has any …

      • Like
    • 3 replies
    • 10.1k views
  23. Started by liz,

    Hi, I am new to the forum and need all your expertise! I live in an older house that has nice old window frames, some old wood columns and some new rough wooden beams put in. I bought the house ten years ago, with all these features but have noticed over time, that the wood has started to dull/fade. Is there anything I can do to reinvigorate the wood without refinishing it? There is too much wood for me to take on a project like that! Also, any suggestions how I could match the pillars (in picture 3) to a colour closer to the rough beams on top of the pillars? Thank you so much in advance! I love wood! Liz

      • Like
    • 5 replies
    • 2.9k views
  24. Guest Sunny
    Started by Guest Sunny,

    I got a Ming coffee table with veneer burp top with the hopes of staining it darker/getting more depth to the burl—would love it to be more like the below statement piece. I’ve stripped and restrained pieces my entire life, but new to veneer... Does anyone have advice on stripping, and how to build up the stain to achieve greater depth? My piece seems like it’s just a poly coat over natural wood, very light yellow, think it’ll be beautiful if I can not muss it up. Attached pictures of the piece I’d like to achieve, sadly my piece isn’t on the internet—but it’s basically light everywhere, there isn’t any depth. Thank you!!!

      • Like
    • 7 replies
    • 8.5k views
  25. Started by Joshua H,

    So I'm getting ready to start a project with a good friend whose a carpenter... They'll be the brains for sure. I'm mediocre at wood work at best so I needed to bring in outside help. I've got the design and total in board feet figured out. So I'm moving to the finishing and looking to get all the material. I'm starting with a general purpose desk atm - secretary desk for lack of a better descriptor. I'm not really looking for that high gloss look which means (From my understanding) I'll stay away from Lacquer. I plan on pore filling the top but wasn't completely sure if the remaining pieces of the desk will still look or match.. OR if everything, L…

      • Like
    • 11 replies
    • 13k views

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.