Finishing
2,922 topics in this forum
-
When I decided to get serious about my woodworking (and had the time) I went to a 12 week course to get myself grounded in the fundamentals. Now I can build things reasonably well, but my finishing sucks. Does anybody know of a course for finishing? I have been looking, but not having much success I am interested in coloring wood, pore filling, and spraying finishes - oil and water based
-
-
- 4 replies
- 3k views
-
-
We have heard a lot about Phoenix Refinishing Sytems, but ironically we are unable to get in touch with them. We have too many projects currently on going due to which we want to get in touch someone who won’t charge us an arm and a leg. Kindly help us.
-
- 3 replies
- 2.8k views
-
-
I would like to force age some wood and I have seen pics and discussion online that leads me to believe that I want to use ferrous sulfate instead of ferrous acetate. I looked around to find some and about the only stuff I can find is lawn care (~35%), iron sulfate for oral ingestion (~25%) and iron sulfate liquid for oral ingestion (~19%.) Has anyone sourced this differently? I'd think the filler in iron tablets would just be starch, sugar, etc.
-
-
- 16 replies
- 20k views
-
-
My house is approaching 40 years old and I am updating the insides. I want to update the looks of the trim work. I have been told to use a 50/50 mix of stain and polyurethane. Is this correct and should I do any sanding before I begin applying? If so what grain of sandpaper should I use?
-
-
- 10 replies
- 3k views
-
-
hello all, I am new to this site but was inspired by the video on the end grain cutting board. I haven't done a cutting board since high school and since the one I made back then (30 years ago) was for my mom and she has been begging me to make a repacment for the last decade it seemed like a great christmas gift. as per usual I am behind and tring to finish before the deadline. (maybe one day I will learn to start such projects 2 weeks earlier but oh well).. here is my problem, my purple heart looks more like brown heart. I chose the purple heart because I thought the wood look so beautiful and I knew my mom would love it but it just looks brown. I thought th…
-
- 6 replies
- 7.6k views
-
-
I needed to spray one of those game boards I make. I didn't want to lug in the HVLP for 1 board and make a mess of the shop so I figured I'd just use the rattle can version and knock it out fast. WRONG. The stuff in the aerosol can is awful. I spent more time trying to get enough down to flatten out than it would have taken me to brush on from the can. If I didn't lay down a heavy coat the surface finish would have looked like 60 grit sand paper. I don't want to give a complete don't buy because it has it's place. It is still marginally easier than digging out my HVLP and spray proofing my shop though. The over spray from the can is less than from the HVLP so i guess…
-
-
- 20 replies
- 6.2k views
- 1 follower
-
-
Working on a project with maple hardwood. Need a crown molding. Found an oak one and did a sample staining but it stained much darker. Any suggestions to reduce the stain absorption would be appreciated. Only need about 10 ft and oak is easily available and acceptable or do I need to purchase maple crown?
-
-
- 5 replies
- 2.9k views
-
-
Currently have a client with an outdoor solid (carved out of a tree trunk) baobab day bed. The client would like me to clean it without removing the patina then reapply oil. She says the person that sold it to her recommended almond oil. Any suggestions on cleaning followed by wipe on oil finish? I'm trying to slow down the growth of check marks.
-
-
- 4 replies
- 3.3k views
-
-
You see many woodworker finishing many parts of a project, and many will say it is because it is easier to finish prior to assembly. In some case, it is like painting the inside of a closet, whatever way you do it, it seems you will always make contact with a finished surface. What about to deal with unfinished wood showing mid-winter ? I made a table with a breadboard, now in January the top has shrunk 1/16 on each side of the breadboard, exposing the unfinished inside of the mortise. Also, the corner of the mortise on the breadboard is a nicking hazard. Knowing now, I would have made the breadboard slightly shorter than the table width... Any r…
-
-
- 7 replies
- 2.9k views
-
-
I have a table that I made but the polyurethane is pouring between the wood... Any ideas?
-
- 7 replies
- 2.8k views
-
-
I hope this hasn't been discussed before. Shellac is one of my favorite small project finishes, so I went down to the local big box stores to get another gallon of denatured alcohol to thin it out to a 2 pound cut. Imagine my surprise when I was told it isn't available in California anymore thanks to someone deciding that the thinner for the most non-toxic finish around was bad for the environment. What are others using for a substitute? I even checked the dedicated finishing stores. No luck there either. And we can't get Everclear stronger than 120 proof, so that is out. Interesting side note: One of the stores had Arm-R-All, something else I haven't been abl…
-
- 14 replies
- 8.4k views
-
-
Working primarily from a picture, I tried to match the color of a project, with the existing cabinet in an apartment. Based on a picture, an oil-based stain seem to be the best. Being in winter, and having to finish the piece in the basement, I did not want to take a chance with the vapor, and I used a water based finish which did not seem as good as the oil-based (not as many color in the water based than the oil based). The resulting color is 'chocolate', while the cabinet have more of a brown-black finish. I used a water based stain, with 2 coats of water based poly on top. I have to drive 4 hours to get to where it is being used, making difficult the color match p…
-
-
- 8 replies
- 3.1k views
-
-
I've tried searching for advice on how to match veneer with solid wood (when finishing) and most of the time (maple, cherry, walnut, etc.) the veneer and the solid that they start with look almost identical. In my case, the veneer and solid look nothing alike. I ordered quarter sawn teak veneer online and when I received it, the color looks nothing like the beautiful, solid teak I had. The image is after applying one coat of teak oil to each. As you can see, the solid is an orangey, golden brown, with a nice range of detail and color just like I have always seen teak. The veneer is a strange tan looking color with little variation. I sat the veneer outside i…
-
-
- 16 replies
- 6.2k views
-
-
Howdy I have a question about using a sanding sealer (dewaxed shellac). I'm working on a bench made of Walnut right now. I'm planning to use oil as the primary finish. I would also like to fill the pores prior to finishing. My understanding is the primary benefit of dewaxed shellac is allowing finishes to adhere to it. But is it also good for oils that need to penetrate, or would it get in the way of that happening?
-
-
- 7 replies
- 7k views
-
-
Hi there! I need some advice for sanding a dining wood table- the grain goes in all different directions and when I sanded by hand I could see scratches after applying the gel stain. I did go with the grain in different directions and I sanded with a 220 AFTER the gel stain :(. Can I try another coat of gel stain?
-
-
- 15 replies
- 4.1k views
-
-
I'm going to be repainting the entire interior of my house this winter & think this might be a good time to get a sprayer. This project will be with latex paint, but I'd like to get something that could be used for wood finishes as well; dyes, polyurethane, water and oil based, maybe lacquer. I know nothing about this subject, other than having used an airless sprayer about 15 years ago to do inside of my shop & it worked great. So are my wishes compatible with any one type of sprayer? Which will work better; HVLP or airless? Thanks in advance.
-
-
- 16 replies
- 3.8k views
-
-
What's the best, most efficient finish for oily woods like Bokote, Desert Ironwood, Cocobolo, etc.? TruOil won't dry and cure on these woods, and varnish seems to present the same problem. I've tried Renaissance wax on those woods but, I wasn't pleased with the results there either.
-
-
- 7 replies
- 3.5k views
-
-
Hello Cyber-Woodworkers! I recently purchased an old Gibbard walnut table with 2 drop-down attached leaves and 2 independent leaves. It has many legs and hidden, wooden moving parts underneath the tabletop. Does anyone know how can I stop the table from squeaking without having anything (graphite, oils, etc.) drip onto my carpet and while also maintaining the authenticity of the table? I have heard rubbing bar soap on the moving parts may be a solution; Has anyone one else tried this? Thanks in advance!
-
-
- 8 replies
- 3.6k views
-
-
Hello! I am a small rubber stamp manufacturer, and about half of my stamps are wood mounted stamps (versus self-inking). My long-time supplier of wood blocks went out of business recently. My new supplier is great but the edges of the block where the wood has been cut are too rough (the other two edges have a finger groove). It just looks unsightly. Besides hand sanding every single block, is there a better way to smooth the edges just a bit? Preferably en masse? I do not want to ask my new supplier to do it because the pricing is already a bit higher than my old supplier and I'm sure if they sanded the edges it would add additional cost. Thank you in advance!
-
-
- 10 replies
- 3.1k views
-
-
I am trying to finish a curly maple box top (8" x 6") with shellac. Never had this problem before. There are fine scratch marks or ridges parallel to the grain. You can only see them when looking almost paralle with the grain and the light is jsut right but they are there. So I sanded it down with 400 grit until the entire surface was the same sanded texture ( no shiny streaks). I brushed on a new coat of shellac - the streaks were back. { I am using a damned expensive 3/4" sable brush). I decided to put 2 more coats on and then sand it smooth again. That done, I swithed to spray shellac from a can - the marks are back. My conclusion is that it was not the brush…
-
-
- 30 replies
- 8.8k views
- 2 followers
-
-
So I just inherited a half done Grandfather clock, neighbor had it left in his house when he moved in and gave it to me to finish up or do as I wish. The story I got was that the prior owner/woodworker was not happy with how it was turning out and threw in the towel and gave up on it. Upon initial inspection last night the biggest problem I noticed that on a few spots he had tried to fix some poor glue ups with some kind of filler. biggest spot is on the raised panels on the sides of the top. The wood is walnut, but he had used a light colored filler. So what are my best options for getting this color corrected? A - stain the whole thing a darker shade of waln…
-
- 8 replies
- 3k views
-
-
I am looking for a sealer/gloss finish for Lilac wood. This wood has been drying for 17 years and is very attractive in color. I have made coasters out of some of it and haven't been able to get a gloss finish on the them without applying 3-5 coats of different types of finish. I have tried spray shellac, Polyurethane Gloss, and a type of spray that ---after 4 coats is nice,glossy and smooth. I realize that this wood is being used in the cross grain mode. I have been a woodworker for over 50 years and am still learning. I wonder what the options are out there, that would seal this end grain, short of using an Epoxy mixture ,and still maintain the color and still be able …
-
-
- 2 replies
- 3k views
-
-
Hey all, we hired a contractor to do our hardwood floors as part of remodeling our first house. We chose grade 1 solid maple due to its low-grain uniform look, and DuraSeal Golden Oak stain. After our contractor applied the first stain application though, the floors look very blotchy and non-uniform. (See photo.) We've since learned that maple blotches very easily (I wish I knew that 2 days ago). Marc Spagnuolo's video, "Coloring/Staining Blotchy Woods", suggests using Shellac Bullseye Seal Coat before staining, along with a gel-based stain, to minimize blotching. Can we recover from this? Can we start over by sanding and use Marc's method, or are the blotches p…
-
-
- 18 replies
- 13.4k views
-
-
I've been working on building up my first pair of speakers over the last few weeks. I finally finished veneering them (my first time veneering, I know looks meh) last night and was eager to get some stain on. So of course without testing the stain on a scrap of veneer first I just started slapping it on there. Immediate regret. Any ideas on how to fix this catastrophe? I can sand them a bit, but I'm not sure it would be enough. You guys will know better than me Before stain, I like the mappa burl and how knotty it is, obviously my bookmarking wasn't great. Live and learn. After stain, gross. Lost all the appeal they had. Just look blob like now. I did want them to be…
-
- 10 replies
- 5.1k views
-
-
I usually use a tack rag to clean off sanding (P600) dust prior to surface coating, but a brand new rag always leaves splotches of residue on the piece. Compressed air and vacuum don't do a good enough job removing the dust in my opinion. A rag with mineral spirits is effective, but will this raise the grain?
-
-
- 8 replies
- 5.1k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·