Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Finishing up some end grain boards made with hard maple, walnut, and cherry for Christmas gifts. There are a million different food safe finishes on the market so was just looking for recommendations from the community. Would like something that I can buy a small bottle of, for not too much money, to give along with the board so that it can be periodically refreshed. Let me know what you guys think. Thanks!

  2. Started by Coyote Jim,

    Just installed some solid oak counter tops. These counter tops were treated with butcher block oil. The directions said to apply one coat, wipe off excess, then wait a few days and do it again and then once more. We only got to do it once. Then the the folks came to install the back splash. The back splash people created some problems. When doing the grout, some of the water they used to wipe the grout got onto the counter. The counters are now discolored in a lot of places. Pics of the discoloration below. My theory and plan to fix: Because the wood already had been treated with oil then the grout water could not have penetrated too deeply right? So I boug…

      • Like
    • 16 replies
    • 4.7k views
  3. Started by AABigRick,

    Hello all, I am into my first project as I bought some Koa wood in Hawaii. I decided to try to make some shot glasses with my fathers help. We have it turned and sanded on the lathe. My question is what kind of finish does everyone think i should use? I would prefer it to be as glassy as possible. I would like to have the grain drawn out alittle more but nothing to dark. Should i try a mineral oil and beeswax formula maybe? Or another type of oil and beeswax combo? Could we try a shellac or polyurehane on the exterior and oil and beeswax on the interior? We have never tried to make anything that needs to use foodsafe finish, and im not sure w…

  4. Started by Minnesota Steve,

    So I was at an estate sale yesterday, and picked up an old music box. I'm not sure how old it is, but I'm guessing maybe 30-50 years. It has plastic feet on it, and it appears the top is finished with a thick polyurethane or epoxy type finish. I just thought it was kind of pretty due to the marquetry in the top, and it has a 17 note Reuge swiss movement playing Isola di Capri. I paid $20 so it's not like I'm out a lot of money if I can't do much to it. The movement is a bit sticky, sometimes it just stops playing even though it's wound up. I thought maybe if I took it apart and cleaned it, maybe use some sewing machine oil on the shafts it'd help. But …

    • 4 replies
    • 3k views
  5. Started by rbraaten,

    I've finished a set of chairs with ARS and after about 6 months the finish on the arms became soft and discolored. On the worst two I sanded to bare wood, redyed with General Finishes water based dye. My thought was the first time the dye had not completely dried so I waited a week before applying three very thin wiped on coats of ARS. The finish is softening again, I'm thinking it is the oils or sweat from hands and arms reacting with the finish. Has anyone experienced this and have a solution? Would lacquer sprayed over the ARS provide more protection or is this just not a good place to use ARS?

    • 5 replies
    • 3.2k views
  6. Started by lewisc,

    I'm toying with the idea of staining some Victorian Ash for my upcoming desk build. I'd love to use some Walnut but I've been using local timbers recently for building. It's quite expensive in Australia. The table is the colour of the Vic Ash I have for the top. The floor is a Walnut stain I've come across. I'll try out some test pieces soon to see how it goes but has anyone used Osmo Polyx over stain? The alternative is a wipe on poly but the feel of Osmo on timber is quite nice.

    • 0 replies
    • 6.2k views
  7. Started by lewisc,

    Anyone know about guitar repairs? I’m looking at a second hand guitar that is a steal but one thing holding me back is some damage. I normally buy secondhand with the option to resell to break even or lose $50 or so. I was thinking this repair could be stabilised with some CA glue.

      • Like
    • 9 replies
    • 3k views
  8. Started by cgrayson65,

    I just recently made a new work desk out of red oak. All is good with the exception of the finish. I have applied 3 coats of gloss clear polyurethane to it. I did do a ight sanding between each coat. The problem I have is I can feel the wood grain. Is there a way to correct this or should I just continue to add more coats till it smooths out. Thank you Chris

      • Like
    • 9 replies
    • 4.3k views
  9. Hello everyone, I'm brand new here at WoodTalk Forum. Need advice please. Just ordered a huge block of wood from local sawmill in Leitrim Ireland. A block of Sitka Spruce to size: 23.6in x 23.6in by 6.5ft long This is for a totem pole standing straight up when complete. Was told today that Sitka Spruce being a soft wood won't last more than 2 years outside in the wet Irish climate. I did not know this. Total newb ! QUESTION : what is the best possible way I can treat the block to last as long as possible? 1) The block was only sawed a week ago so still full of moisture right... can I apply wood seal even though it's still so …

      • Like
    • 5 replies
    • 5.5k views
  10. Started by Johnny4,

    Hey team, Can I use General Finishes High Performance waterbourne finish for a baby's crib? I just don't want the little one ingesting anything funky, and it's gonna be a bit before I could do shellac outside....mama's on my case to finish this thing. Any ideas? Thanks

      • Like
    • 5 replies
    • 3k views
  11. Started by rodger.,

    I use General finishes HP Poly a lot - its one of my "go-to" finishes for both HVLP and brush. I saw this in the LV catalog the other day and it looks enticing. Anyone have experience with it? http://www.leevalley.com/en/wood/page.aspx?p=75628&cat=1,190,42942

  12. Started by ArtJacobson,

    Hi, Would a product like Oxalic Acid help tone down the vibrancy of a grain like pine? I like the pattern on some of the wood I have but need it much much less vibrant / less contrast. I was originally thinking gel stain would help and just color things evenly, but the grain still pops on my test piece. Thanks for any suggestions!

  13. Hello, Been watching the forums for a while now, finally decided to join today! I want to match an existing project that's red cedar with a shellac finish. It looks like the attached image, mostly clear / rift sawn / straight grain with a brown very slightly warm tone. (Not reddish cedar) I would love to use something like white oak since this need to be durable, but not sure if I'd be able to match it with off the shelf stains and finishes? Thanks for any ideas or links to techniques. Edit/Update: By durable, I meant a harder wood that will stand up to use indoors as a shelf. Art

      • Like
    • 10 replies
    • 15.9k views
  14. Started by thg812,

    I currently use a Graco 3800 that is 20+ years old. I feel that its time for a new sprayer due to advancements over the last 20 years in HVLP spray guns. I was planning on getting the Earlex 6003 HVLP system but noticed that it is just a 2 stage turbine & my Graco is a 3 stage. So now im thinking that i should just buy a new spray gun for the Graco system because the old turbine runs well. If anyone has any opinion on which route is best or of a good spray gun to match my Graco please let me know. I will attach a pic to show the type of work that i do, most of the finish coats are a latex paint(Ben. Moore Advance) Thanks much for any help !

    • 5 replies
    • 4.4k views
  15. Started by Lane,

    I am going to invest in a 5 stage HVLP (turbine) system finally to improve my work and opportunities. I am torn between Apollo 5 stage and Fuji 5 stage. I would appreciate opinions on both and briefly why. In other words which is better? I'm only interested in those two. Thanks in advance for your help

      • Like
    • 10 replies
    • 3k views
  16. Started by curlyoak,

    Invent one and get rich. I am done since this picture. Next sanding. I don't like refinishing. I do my own stuff. Each time it reminds me not to do that kind of work. It was waterlox. An additional coat was added 8 years ago. It was fine for a number of years. Then it started gettin gummy. Nasty. Constantly filled the scrapper. That is now behind me. I intend to finish it with General armRseal gloss, oil. I have watched a few videos on application and it looks like it shouldn't be a problem. But now I am tired and I will do the sanding next when the energy returns...

  17. I made a Purple Heart cutting board (not end grain) when oiling the board there’s a large area down the center that will not hold oil! Have applied multiple times but the area keeps looking starved/dry. Should I seal the underside with shellac? Idk what to do. Please help! Any suggestions very welcome.

  18. Started by Tmize,

    I’m getting ready to use general finishes milk paint on a project I am wrapping up. Got the can of it today and it says to saying to 220 grit. Here’s my issue The piece already has a hand plane finish. I’ve never had a problem with a finish it hearing to it before do you think it’ll be a problem?

      • Like
      • Thanks
    • 12 replies
    • 3k views
  19. Started by wdwerker,

    We just started a project building 3 bookcases with storage in the bases for a doctors office. Needed to match the existing desk as close as possible. I removed a drawer front to use as a sample. My finish supplier offers a color matching service. They mixed me a gallon of "Amazing Stain" , it's a spray on leave on solvent based pro shop only product. But alcohol based dyes behave very similarly. I spray very thin coats with only a few minutes between them. Careful 50% overlap of the spray pattern. One coat on cherry ply with a scrap of the raw ply as a comparison. Prep was 220 Granat on my ETS 150/3 random orbit sander then 220 & 320 grit by hand using fo…

      • Haha
    • 15 replies
    • 5.2k views
  20. Started by Mark J,

    Has anyone ever tried using a white cotton glove as an applicator instead of a rag? I'm applying a gel product onto a small decorative piece with a lot of curves and crevices. It has to be coated top and bottom and inside and out. I was just thinking that using one of those white cotton glove liners might be a better tool. Then again maybe not?

  21. Started by Peter Magurran,

    Evening All, I'm looking for some advice on how to clean up this grandfather clock. I'm pretty new to this so apologies if these sound like stupid questions! I am not totally sure what wood has been used to build the clock but I wanted to know the best way to get it looking neat and tidy again. Any Suggestions are greatly welcomed! Peter

    • 5 replies
    • 2.9k views
  22. Birch veneer plywood. 2 coats of General Finishes Gel stain on top of that. Just gave the Arm-R-Seal (semi-gloss) 24 hours to dry, and it has a lot of little bumps. They don't appear to be dust or contaminants, but just bubbles in the finish. First time using this stuff, so hoping for some guidance - I'm just planning to sand and put on the next coat once it's smooth, but wanted to make sure I'm not overlooking anything. Tried my best to capture on photo, but this is more a angle of the light/rub your hand over it kind of description. Per instructions, the seal was stirred constantly during application, put on with a foam brush, and the bubbles did seem to appear rig…

      • Like
    • 12 replies
    • 10.7k views
  23. Started by Martin-IT,

    Hi, I have a live edge hard maple counter by the hot tub outside. I have used spar varnish on chain saw carving which lasted very well. Since it is a flat piece and many youtuber were using penofin, I decided to give it a try. Both side and the underside still look like new after 3 years but the top had cracked/peeled and water was getting to the wood. What is worth the extra $ for penofin ? I doubt it at this point. I used a chemical stripper on the top only and sanded it. I have other piece, in teak or eucalyptus which I used Cabot Australian Timber Oil (the real stuff, not the blue can cover), which lasted fine, but they are not 12 mo…

    • 5 replies
    • 2.9k views
  24. Started by Chestnut,

    **** I pulled the below from another thread. I wanted to add to the review but it no longer made sense to put it where it was and as i try out different WB finishes I'm going to keep updating this ***** From what I've seen below i don't know that there is a point to put shellac under it. Though i don't know why it over dewaxed shellac would matter but I'm not a finish expert. Also from what I've seen 1 coat of 2lb cut shellac isn't enough to seal the wood so the WB polys were raising the gran and soaking into the wood <shrug>. Going to start with the conclusion because that's all that any one cares about. The Minwax Oil Modified poly (MWOMP) seems very com…

  25. Started by Coop,

    I needed to darken a 1/4” piece of ply that will be used as a back panel on a walnut end table. I bought a bottle of Coffe Brown TransTint and mixed some in with some ARS, which became suspended and not mixed. I mentioned this a while back in another thread but don’t remember where. Tonight, I mixed some up using denatured alcohol and it looks mo betta. Question is, can I now apply ARS over this? As cheap as 1/4 ply is, I could have tried it without creating this thread but I thought others could learn from my mistake. Thanks

      • Haha
      • Thanks
      • Like
    • 46 replies
    • 9.6k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.