Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by pahoulihan,

    Suggestion for a good wood filler for pine? Have a few screws I’d like to cover up before stain and finish... my first time using white wood

      • Like
    • 12 replies
    • 4.4k views
  2. Started by Marmotjr,

    I have some packs of Gator paper, and I'm trying to sand the tough spots on these reindeer. More crap is coming off the paper than the wood. So, a two part question: 1) What brand would you recommend getting from a big box store on short notice? 2) What brand do you recommend long term? I prefer internet shopping, and my local hardware store only carries gator, so I'm looking to stock up on a reputable supply.

      • Haha
      • Like
    • 20 replies
    • 3.6k views
  3. Started by pkinneb,

    Hi all I am going to be turning some replacement handles for my chisels and would like to match these hand tools. Typically I just use a friction polish for turning projects and that would probably work just fine here but curious what you think the finish on these tools is?

      • Sad
      • Like
      • Haha
    • 31 replies
    • 7.5k views
  4. Started by pascal,

    newbie here who mostly browses and learns from all you great folks. I've been building cabinets in preparation for the bathroom and I'm really happy with how they are coming out. Alas they are so nice I'm afraid to paint them! I painted one vanity I built with a graco 360 and Sherwin Williams snap dry (https://www.sherwin-williams.com/homeowners/products/snapdry-semigloss-door-trim-paint) and had issues with with orange peel and pulses showing in the paint. The paint was going on too thick for sure. Our trim is painted with Sherwin Williams ProClassic Waterborne Interior Acrylic Enamel (https://www.sherwin-williams.com/homeowners/products/proclassic-waterborn…

      • Thanks
      • Like
      • Haha
    • 9 replies
    • 5.5k views
  5. Started by AndyG,

    Hi all, I have been experimenting with different mineral oil/beeswax finishes for my cutting boards lately and now I’m ready to try something new. I’d like to try using lemon and orange oil along with vitamin E and carnauba wax. Not necessarily all together, but I’ll experiment with different ratios to get a finish I like. Has anyone tried any of these with their board finishes/waxes? I’d love to hear from you. I suppose you’d have to use pure lemon or orange oil to get the benefits rather than just a scented oil. And did you use powdered vitamin e or liquid? I appreciate the help. Thank you

  6. Started by Cygnus A,

    How would I achieve this dark grey finish, preferrably on pine or fir without the tiger striping?

      • Like
    • 1 reply
    • 2.8k views
  7. Started by JeepDad,

    This spring I am transforming our patio and grill area. I am building a grilling and food station with coolers, cabinets, etc..... I also want to build a farm house table with a slab top. The slabs I will be using have been kiln dried and stored (by my wood guy) for a year or so. I live in the Mid-Atlantic region that can have humid summers and cold/wet winters. Which finish have you all used/tried that worked?

      • Like
    • 10 replies
    • 4.8k views
  8. Started by Tim Buller,

    Does anyone have experience with finishing Wenge? I have used clear Lacquer and clear Polyurethane. Both or these products turn the wood almost completely black and when this happens you lose the look of the grain. Does anyone know of a way to stop this turning the wood black when putting a finish on the wood? Thank you in advance.

      • Thanks
      • Like
    • 5 replies
    • 5.5k views
  9. I've been asked to fix the finish on a dining table with a finish like this on it: https://woodandshop.com/make-a-historic-beeswax-oil-turpentine-furniture-polish-finish/ It's not terribly sticky, but enough to be bothersome. Anyone done a similar fix? Enough of it has dissipated away, that it's covered with tiny, oblong spots that look like they have no finish on them any more. I know that Linseed OIl starts evaporating from when it's first put on, and never stops, but haven't run into this exact issue before. I don't have time to strip, and redo the whole thing, but was hoping for some applied fix. It's a big table-probably 42" x ten feet long. It stil…

      • Like
      • Haha
      • Thanks
    • 13 replies
    • 5.5k views
  10. Started by Norm Thordarson,

    The windows are wrapped with clear fir with a natural finish. Some of the corners have become water stained. So, I’ve managed to sand away the stained areas. Then I sand the whole bottom sill, not completely bare, and apply polyurethane. It either comes out blotchy or the corners where the stains were sanded out are much darker. Tried putting Daily’s wood conditioner on to seal, but darkened the wood also. How can I return the sill to a uniform natural fir finish?

  11. Started by PJ4814,

    I have a couple of A4 size sheets of ash burl veneer, commercial, and need to glue them to either side of an MDF substrate. This will be used as a lid for an heirloom box. Can anyone please advise how to find the face side of each of these sheets? regards, PJ

  12. Started by Cygnus A,

    A friend asked me to make this rustic art piece. It is almost done, but I need to decide if I will apply a finish to it or not. It is made from cedar planks that are rough on the top side. I planed everything on the back side for glue up and to get an even finish. Should I oil it? Worried about trying to poly coat it. It is glued to an 1/8inch hardboard. The full frame is not visible in this images, but you get the idea. I might just leave it bare. What do you think?

  13. Started by KLR,

    Good evening, I refinished a table for a client and a dark spot developed in a section of the surface. I stripped the area to level the color to match the rest of the table. I'm having difficulty in getting the color to level off. Can anyone give me a suggestion on patching and leveling the area?

      • Like
    • 8 replies
    • 3k views
  14. Hello, I am rather new to refinishing and have been watching many of the videos/reading the forums. I have been searching for an answer to refinishing a John Boos walnut butcher block top that originally had a mineral oil topcoat. The edges on the top were pretty sharp so I rounded them slightly and then sanded the whole top starting with 100 and then 150 and a light wash with Mineral Spirits. My paper is still gumming on the edges so I am concerned the mineral oil has not "dried" enough. The top and bottom look almost raw again and are mostly powdering when sanding. Eventually, I would like to apply one coat of Seal-a-Cell followed by two coats of Arm-r-Seal s…

  15. Started by RR60,

    So will have a 8 ft x 30" table top to finish. Stain and wipe on poloy For such a large area will I have a problem? Maybe a floor finish applicator lambs wool pad. By use handheld. Any suggestions? Thanks

    • 5 replies
    • 3.5k views
  16. Started by RR60,

    Never really used it much. But do have a couple of cans of minwax pre condition that I had for awhile I can use. Anyway staining a red oak cabinet on this project. Have not decided which one. Best doing a test sample with Zar and General finish stain I had on hand. But are oil wipe on stains. Not gel. Each color I would like to lighten it a little and like that the condition hides the grain a little. Open grain part is more of the same color instead of darker without it. Any cons on red oak? Chance of puddling in corners and blotchy. Thanks for any suggestions

      • Like
    • 10 replies
    • 3.5k views
  17. Started by Chuklz,

    Thanks to some good advice from other threads, I've been looking into making some danish oil. Do you use different ratios in certain situations? I don't plan on adding color just yet, but was curious what recipes others use when adding color to their recipe. When adding stain how is that worked in to the ratio?

      • Thanks
      • Like
    • 12 replies
    • 10.4k views
  18. Started by Chuklz,

    Being new to woodworking I started out doing a bunch of pallet projects for family members that really didn't require much in the way of finishing other than some ploy or shellac. I'm now moving on to try to build more polished pieces and have built my first small jewelry boxes. I was reading on various finishing techniques and one was to wet sand BLO starting with 220, then 300 and finish with 400 grit sandpaper. I have done the first to sanding steps and plan on getting the rest done tonight and tomorrow since I don't have much shop time during the week due to the rat race commute that is my life. My question is after letting the boxes cure for a week would you …

    • 12 replies
    • 10k views
  19. Started by Gabi,

    Hello! I'm working with a slab of honey locust, it's my first project and i did the dumb mistake of not getting a separate piece of wood to see the effects of the finish. I assumed just oil with no stain wouldn't change the wood color too much but i was WRONG. I did a single layer of BLO and now the slab is significantly yellower. Would it be possible to stain the wood now that i already put a coat of BLO or am I stuck with the yellow? Thanks!

      • Thanks
    • 12 replies
    • 6.6k views
  20. Any help getting this finish to look at all uniform would be greatly appreciated!! I am completely new to woodworking and finishes. We moved into a barge in London with a great wooden pilothouse, but whose varnish was so old that it had completely worn through in several areas, leaving bare rotted/graying/pitted wood. Trying to be useful, I thought I'd remove the old varnish then refinish with teak oil. What I did: On the LEFT door, I sanded only. The right-hand vertical piece of this door is the look I'd hoped to get. I sanded it down using only 120 grit paper on a 1/3 sheet sheet sander. It took near 2 hours for just that one piece! Hoping to sp…

      • Like
    • 10 replies
    • 7.4k views
  21. Started by Nlafer,

    I am looking for some help. I have just put on 7 coats of Minwax water-based Oil Modified polyurethane on my table. For reference, the table is wormy maple and was sanded to a very smooth finish. I expected the first few coats to be uneven as the wood absorbed the poly, however I still see major streak marks in the poly and I am now 7 coats in. I have been sanding with a high grit paper in between coats. I have also been cleaning all the dust before applying the next coat of poly. The problem I am having is that the poly is too thick and leaves all the marks from the brush or foam ( I have tried both. ) I have read various posts and wonder if I could try sanding…

      • Like
      • Thanks
    • 26 replies
    • 38.7k views
  22. Started by bbaude,

    Folks, When at my local "mill" the other day, I was buying some walnut for a project for my niece. The dude their who I have gotten to know a little bit suggested that I use a light walnut stain on the finished piece to help it remain dark because it will fade over time. I was curious if folks do this ... and if so, what do you like to use. In the past I have always just done poly so the grain can come through. Never thought much about staining walnut in part because I have several pieces from my grandparents that my father and I have refinished where they had used that thick white paint back in the day over walnut. Gasp!

      • Like
    • 9 replies
    • 3.4k views
  23. we have a sign with 2 coats of Envirotex lite bar top epoxy. on mixed species of wood. we had some tacky issues so we 220 screen buffed out. now we are wondering if we can re-coat with our satin polyurethane flooring finish?

    • 1 reply
    • 4.8k views
  24. Started by TheFirePoppy,

    Hi folks, I'm a total newbie. I cut a cookie from a fallen oak tree at work to make a sign/keepsake for my sister's wedding. She plans to keep it on her doorstep as a welcome sign, so it will be exposed to weather changes (though covered). After some research, I'm tempted to go for CAB-laquer for the finish, but am wondering if anyone has a different opinion on that? Also, if I do go with CAB-laquer, is there a sealer or something else I should put on it first? (Already did a pentacryl soak before sanding and whatnot, and will woodburn their family name into it this week - also open to advice on that!) Photo of the slab attached. Thank you so much for your…

    • 4 replies
    • 3.5k views
  25. Started by Danxyz,

    I frequently see rustic finishes where the distressed indentations are very dark or black in color. This contrasts nicely with the finished wood color of the main surface and really adds to the aged feel of the finished piece. How is this done? I've tried spraying paint over the entire surface with the idea that I'll sand it off (leaving the color in the crevasses) but the paint soaks deeply into the wood making it impossible to get it all off the main piece. This occurs even if I attempt to seal the wood first. I've searched on the internet and cannot find any references to this yet I frequently see it done on finished pieces. Does anybody have a recipe or link I c…

      • Like
      • Haha
    • 4 replies
    • 3.1k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.