Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Travis Anderson,

    Hey guys, need some advice. I accidentally used 1 coat of spar urethane on my end tables for inside my house. I wanted to use a clear coat/sealer to help prevent water rings and such. Sanding them down is not really an option due to the design on the tops. What do you think would be the best option for applying an interior clear on top of spar urethane? If there even is one.. Thank you so much in advance!

    • 6 replies
    • 3.5k views
  2. Started by Greg Dent,

    I was filling some hole in a lamination. Its salvaged pine boards with screw holes nail holes and a few knots. I poured the epoxy in and tried to break the bubbles with a heat gun. I have done this before and not had a problem. I used West System with their slow dry hardener. I mixed it 2 parts rezin to 1 hardener. It went hard on me within what seemed like 10 to 15 minutes. i thought it should have taken longer to flash. It would up getting a pile of little white bubbles in it and I will have to grind it out now and refill it. Any tips you guys have would be much appreciated.

      • Like
    • 5 replies
    • 2.9k views
  3. Started by JosephThomas,

    Any way to remove some small wine stains from raw wood? It's actually BB ply...someone spilled on it after sanding but before I had applied any finish. Making it perfect again is not critical, as it's a plywood project. But I'm wondering if there's any way to pull some of the color out of the birch veneer before I add finish...? Something akin to spreading out kitty litter on concrete to soak up oil stains?

  4. Started by amateur eric,

    I work in a cabinet shop, and we’re doing a job for a customer and we are putting a maple pull-out cutting board into a knotty Pine kitchen cabinet. I asked my boss how it will be finished, seeing as how the cabinets are getting sealed and lacquered. He said probably lacquer, which baffles me. Aren’t cutting boards supposed to be finished in an oil product, not lacquer??? I always assumed the chemicals in the lacquer would contaminate any food products that gets cut on it. Am I correct, or misinformed? Sent from my iPhone using Tapatalk

  5. Started by Brendon_t,

    Recently I started finishing an outdoor table that will reside on my new patio area. Decided to go Epifanes over cpes. Planned on a few good coats of gloss then matt over it to knock down the very high shine. First two coats on and wouldn't ya know it, it's not very shiney. In fact, it's not shiney at all. Checked the can... Duh, I ordered the matte finish in the big jar. For those with knowledge of the product. Would you continue building coats with the matte or bring it back down and go the original plan? I'm not sure as to why people start with gloss but I'm assuming that widely used schedule is there for a reason.

      • Like
    • 13 replies
    • 4.1k views
  6. Started by Mycrossover,

    There are endless discussions on the best finish for cutting boards salad bowls and wood handles on kitchen tools. I used some brand of nut oil finish. Then I mixed mineral oil and bee's wax, that was even less durable than the former. I have heard tung oil is durable and actually dries but takes forever to do so. I usually see it sold mostly for outdoor use. It is not toxic when dry. Any advice? Thanks. Sent from my SM-G900V using Tapatalk

    • 0 replies
    • 2.7k views
  7. Started by Gixxerjoe04,

    My wife has a client that had her table get some fine scratches on it and she came to me for a solution. Was hoping they could be buffed out but wanted to ask the experts. A couple people suggested paste wax and 0000 steel wool. Seemed like a good idea but didn’t know if it could affect the sheen? What say you finish experts?

      • Thanks
      • Like
    • 9 replies
    • 3.2k views
  8. Started by OakStBeachBum,

    Hey WTF crowd - was hoping to get some input on a finishing question related to a desk that I am making for my girlfriend (sketchup design provided for reference). The primary wood is walnut with some holly trim accents. Here's what I know: She's going to use the desk in her office where she sees clients so she is somewhat particular about how it looks (prefers a more satin look) She likes the appearance of one of my previous projects where i used boiled linseed oil under 5-6 coats of amber shellac and buffed with steel wool/paste wax The linseed/shellac/wax finish seems like it wouldn't offer very much protection for a piece of furniture that's going…

      • Thanks
      • Haha
      • Like
    • 25 replies
    • 8.4k views
  9. Started by Kate Beatty,

    Wondering if mildew could be the cause of chair seat graying after staining? My friend is refinishing an old chair and sent me this picture asking what can be done. I’ve never encountered this before.

    • 5 replies
    • 3.1k views
  10. Started by Chris Kocher,

    Hi all, I finally got back into woodworking (since high school 10 years ago) and everything has been a learning process during my project. I'm looking to finish a live edge coffee table (and also two console tables and a side table for next to my couch made) made of sycamore wood with the following conditions but am having trouble finding the 'just right' method/products. The following is my ideal finish for this project. Enhanced grain while yet conserving the light tone of sycamore to keep as natural looking as possible Low Sheen (Matte preferred) Non-yellowing Protected from water, booze, food Protected from scratches Preserve t…

      • Like
    • 9 replies
    • 7k views
  11. Started by Andrew1,

    I am making a sign in book type sign for a wedding. I need to seal it and then have people sign it and than finish again. Any thoughts on the finish? I was thinking a clear shellac to seal and a lacquer to seal in the marker but also heard that a Sharpe is oil based and can ruin the shellac. The wood is maple with cherry endbaords type design and they want a more natural wood color and for it not to yellow the maple

      • Like
    • 12 replies
    • 4.1k views
  12. Started by Craig Farnsworth,

    Spent a hour this am looking on how to's finish bocote. I have a lazy susan made up with different types of wood.. One being Bocote. Had used minwax sanding sealer that is good under water or oil base material.. Then applied Helmsman finish over top.. All the pcs dried cept the darn Bocote. 3 days later still tacky.. Called Min Wax people and told me to wipe with mineral spirits. Since then I have experimented. Found that Helmsman with added Japan drier will dry after about 8 hours.. Also the Helmsman spray satin dries in half that time.. Course the spray is thined I expect and will require more coats. Just thought i would past that along.. Bocote like Cocobo …

    • 6 replies
    • 8.6k views
  13. Hey guys, I'm looking at buying finish for my book case project. My favoured finish is currently General finishes Enduro var. It's water based, so it sprays well and dries quickly, but it seems tough and has the amber hue of an oil finish. I realized I'm likely going to need more than a quart can for this project, which run me about $48 each. I'm not crazy about spending over $100 in finish after tax. I looked around, and it seems like the Minwax oil modified polyurethane is close to the same thing. It's also water based, with the amber hue and other characteristics I described above. The difference is I can go to home Depot and buy a gallon for $62. The questio…

      • Like
      • Thanks
    • 28 replies
    • 14k views
  14. Hey there. So I just bought a house and had the floors done prior to moving. They looked great when I first got to the house and paid the contractor after his final visit. But the more I look at certain boards the more I’m noticing peculiarities. I can deal with a sander mark here and there, but what on earth are these drop/smear/zebra marks seen in the pics ? (Shown with and without flash to highlight appearance in various lighting). They claim it is due to my Wood’s age, but i think it seem more like a rushed job. It’s only on a few boards scattered randomly... and always isolated to single boards... never bleeds over to a neighboring board...but it seems odd…

    • 7 replies
    • 3k views
  15. Started by Jg2259,

    I have been asked to refinish this too to a bookcase and am having trouble removing the black water spots that have penetrated the wood. The finish was Shellac, so at first I tried to just use denatured alcohol to dissolve the finish and refinish that way. That didn’t work, so I completely strip it and now the black stain is still deep in the grain. Any suggestions on how to remove the black in the grain? Thanks Sent from my iPhone using Tapatalk

      • Like
    • 11 replies
    • 3k views
  16. Started by Fotobabe28,

    Hi, I am new to this forum and really hope someone can help me. I am refinishing a cedar chest, close to 100 years old. Lid and sides are veneer, inside and back are cedar. I am an amateur, all work is done in my basement and not a woodworking shop. Let's just say I am learning from my (many) mistakes. First, used straight polyurethane, I applied it too thick, and then dust and stupid bubbles kept showing. I sanded in between the coats, but on the last coat, I stood the lid on it's side to dry, thinking less dust would settle. Instead, long drips appeared. I thought I could sand them out, but I wound up having to sand a good portion of the lid. So, knowing all the s…

    • 6 replies
    • 5.1k views
  17. Guest
    Started by Guest,

    Planning on using satin finish as a wipe on finish. How long do I need to let it dry between coats? I have scrap white cotton fabric I was going to use as an application cloth. This OK? thanks. Brian

      • Like
    • 11 replies
    • 6.2k views
  18. Started by PWRFULZ3R0,

    In a couple days I’m going to receive a new Gorilla swingset/playset for the kids. The instructions recommend staining or finishing within 90 days. I would like to apply something while I build it or soon after. I’m interested in applying something clear or something with very little change in color. And it needs to be easy to apply, I’m thinking something I can spray with my HVLP. It doesn’t need to be a super long lasting finish, so long as it excepts future coats without lots of sanding. I realize my answer might be some type of deck stain, but I have no experience with deck stains beyond Penofin for composite decking (which is awesome stuff btw). I’ve used e…

      • Like
    • 8 replies
    • 3.1k views
  19. Started by Coop,

    I hate to interrupt another thread along the same topic, but better than a HJ. We recently bought a new bedroom suite that included a new bed, dresser and side table. Long story and boring but at least the new one is all wood. But, it is dark walnut. Now, wifey wants a side table on her side like I have with the initial purchase but, doesn’t want to spend the extra $500. I recently built an end table for the family room from walnut slabs that I acquired and she likes the style but not the reddish tint in the wood as “ it doesn’t match”. Question, can walnut with a reddish tint be darkened to take out the red? I’d rather loose my virility than to ask this question about di…

  20. Started by windguy,

    Howdy - newbie here. Has anyone used Spar Varnish on Port Orford Cedar? Also looking for stain recommendations. The project is vertical deck louvers for wind control. I will also be bending some laminates to add some soft geometry - probably as extensions of deck rails - that's phase II. For now it's the louvers and some basic benches. The environment is pretty harsh - coastal Oregon - lots of rain, fog/marine layer, intense sun, and hellacious winter storm winds. I'll be using STK Port Orford for structures and clear for bending.

    • 15 replies
    • 8k views
  21. Started by Lordpax,

    I have a cherry cradle I’m finishing using 100% Tung Oil. The first coat was cut 50% with mineral spirits and liberally applied with a foam brush, and re-applied to cover all the soaked in areas after 30 minutes. 30 minutes later all excess was removed with a cloth. I then noticed on one panel what appeared to be a streak in the wood, it almost looked like a bead of sweat or perhaps a bird overhead, it was approximately 1/4x6” long. I thought I could just sand this down, and re-apply the thinned oil. I sanded with the grain at 320 (the final sand grit as well), in an area covering the streak, about 2x6” and re-applied the cut oil. However, this section where I…

    • 3 replies
    • 3.6k views
  22. Guest
    Started by Guest,

    Hey everyone, I have a client with a funky little table made out of hockey sticks. It was built 40 years ago by his friend's father as a gift. It has seen years of interesting repairs, which I am in the process of undoing and getting back into good shape. Because the top is made out of hockey sticks, it has 1/8" V-grooves every 1 1/4" or so, where the chamfers from two sticks meet. To make this a more usable surface, I suggested using a high build finish to level out the top. I have a few questions relating to this: Should I be concerned about the interaction between the finish on the hockey sticks (which I cannot remove without removing the labels on…

    • 7 replies
    • 3k views
  23. Hi, I purchased a lovely inlaid box approx 5 years ago at a UK Christmas fair which holds special memories for me. Dusting it today, I noticed spots on the finish, and 1 inlaid piece seems to be separating (dried glue, maybe) which can be seen at the top middle right of the 1st picture (the inlaid burl is separating from the gold inlaid by just a hair). Not so much that it's spots, but it looks like the finish is in various stages of disintegration (I can gently scrape/push the 'spots' of the finish around, most apparent on the black wood). I love this piece, due to its sentimental value. I am new to any sort of woodworking, is restoring the finish something I …

      • Like
    • 4 replies
    • 2.7k views
  24. Started by S Williams,

    Working on first reclaimed wood project. Built a coffee table with all the hole and knots to be filled before it gets stained. Any suggestions on a good and easy 2 part epoxy to use. Project will be finished with a walnut stain and then a semi poly over top

      • Like
    • 6 replies
    • 3.2k views
  25. Started by KDickson,

    Hi guys -- I'm about to sand and finish a pine floor in my kitchen. We did it 14 years ago with two coats of clear poly and now it needs to be redone as the poly is wearing off. Poly was a good choice for a kitchen floor which gets mopped fairly frequently (I try not to use much water). But I'm wondering if there is a product that would seal as well as poly without turning the wood so yellow?

      • Like
    • 8 replies
    • 3k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.