Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing

  1. Started by Cg9638,

    Hello all I am new to the forum and was hoping for some finish guidance. I am building a hickory crib for my daughter and would love some recommendations on a baby safe finish that can be sprayed.

      • Like
    • 3 replies
    • 3.1k views
  2. Started by LadyB,

    My husband is the builder in our family, and while I've tried my hand at that, I'm pretty much a laborer / cheerleader when it comes to building. I have found that I really enjoy finishing, however, but my learning is mostly trial and error. I think I've done enough projects that I've decided to really put effort in to making the finish as good as it can be. Right now I'm a moderate DIYer, but I want to go to the next level. We have hopes of building / finishing our kitchen cabinets, bedroom and office furniture, etc. The styles are not terribly ornate -- think shaker or mission style. What resources would you recommend for finishing furniture / cabinets? Right now I…

  3. I've been doing some research on professional grade cabinet finishing strategies, and a lot has come up on using Pre-Catalyzed, Pigmented Lacquers in place of paint. I know the advantages/disadvanteges etc, but I cannot find a place to purchase online. Do I purchase the lacquer not yet tinted, and have it tinted to a custom color somewhere locally? I've got limited knowledge on how to get it, so any and all help is appreciated!

      • Like
    • 12 replies
    • 14.6k views
  4. Started by Gwenn,

    I have applied 3 coats of Danish Oil, spaced about 6 mo. apart, on a kitchen cart. Last application was over 1 year ago. I would like to apply a finish that will not fade or need retouching. Can I use a poly gel or Minwax stain, and what prep do I need to do beforehand. I have never done a project like this before. Thank you for your suggestions.

      • Like
    • 5 replies
    • 3.1k views
  5. Started by houstonwoodworker,

    Hi, I almost never paint furniture and my wife wants to me build and paint a few pieces so I want to get a sprayer. What do you recommend for spraying paint? And do I need to dilute it ?

      • Haha
      • Like
    • 12 replies
    • 6.2k views
  6. Started by cjm111,

    I've been working with wood elements for many years...going all the way back to the late 1960's when I refinished golf clubs (yes, the old days when woods were actually wood). IN the past few years, I have been building slab tables and mantles. I typically use Danish Oil for color and have used General FInishes products like Arm Or Seal for finishes. I am working on a project that is relatively new for me. My front doors are knotty alder and get late afternoon sun on an angle....the lower part of the doors is fading and I have decided to redo the doors to add color back to the natural color that was on the doors. Here is my question. If I use GF gel stain, can …

  7. Started by Trevor,

    I was curious what finish would prove a high gloss shine?

  8. A client sent me a picture of a nursery round someone had or that she had seen. The stain on the wood round was black on the edges of the circle and in the middle it had both colors throughout. The easiest way to explain it would be either to say it looked like a wash type stain job OR... if it was paint that would have been used I could achieve this look by maybe painting the whole round back and then possibly using a dry brush technique to go over it (in the middle only, excluding the edges) with a weathered grey or white-is grey by doing a dry brush technique. My mom uses the technique all the time on ceramics. I have mocked her technique and have achieved similar resu…

  9. Started by Neofita,

    Hello there! Newbie here, I’m an enthusiastic, but this is my first job. I got a mahogany chest of drawers. It was in a very bad shape. After all the repairing job and a lot of sanding (maybe too much) I decided to paint it white with a Jolie paint. As you probably already figured out, it was a disaster. It was not just bleeding, actually the paint became pink. This is the only option to have my daughters’ chest of drawers, so, after looking on the web, I sanded off the “pink paint” and I used two coats of shellac. I applied them with a cloth. I changed the cloth before doing the second coat and after that I noticed the cloth was dirty, pinkish, still due to the…

      • Thanks
      • Like
    • 29 replies
    • 10.7k views
  10. Started by OakStBeachBum,

    Lie Nielsen is now selling something called "Peacock Oil". It comes in three different colors and claims to be "A unique blend of the world’s finest traditional oils, resins and waxes that together produce a breathable, water-repellent, figure enhancing and grain strengthening finish." Has anyone tried this stuff out? Thoughts? What category of finish would you put this in? Can another finish (poly?) be used as a topcoat over this stuff? Thanks for the help!

      • Like
    • 4 replies
    • 5.9k views
  11. Started by jadedj,

    Hi Guys - new to woodwork but really enjoying it! I bought this antique table a few months ago and have been working on it ever since. I went through the laborious process of stripping, sanding, stripping some more, etc. Well after 3 or 4 coats of oil-base stain (it was summer in NY so pretty humid) it looked like it was time to add the polyurethane and I thought I'd be eating on it in a few weeks! Not so fast. I started with the legs (thank God) and after applying a coat of poly and letting it dry, there were odd white flakes that showed up. I've attached what they look like, I've also attached a side-by-side comparison of the one leg that just has stain, compa…

      • Like
    • 25 replies
    • 22.1k views
  12. Started by Neofita,

    Hi there! I got a old frame. I’m trying to bring it back. I started to sand it and I discovered it was gold in the inner part. So: 1) I would love to restore it in the same way. Do you have any idea on how to do it? How to reproduce this reddish antique gold? 2) There is still the black paint on the black dots. Any idea on how to remove it without damaging the little dots? attached pictures of my work in progress. comments and suggestions on my whole job are more then appreciated too! Thanks!

      • Haha
      • Like
    • 7 replies
    • 3.7k views
  13. Started by Formernuke,

    I'm going to make a flag display case for my fathers flag. I want to mimic the look of purple heart wood because we all know the color of purple heart just doesn't last. I'm thinking of using maple. What I'm wondering is the coloring. Should I do water based stain or tinted shallac? Should I water base stain then shallac over that? Either way I will go back over it with a UV protection top coat. Depending on which of the above would water based or oil based be better? Thanks in advance

      • Like
    • 16 replies
    • 8.8k views
  14. guidanceNeed some ideas on how to keep a epoxy pour in the mid to high 70's for curing. I live in the mountains of Idaho and my garage is not "heat" efficient by any means. During the night I might be able to keep it at around 50 degrees. So I need to maybe build a heat box or use some sort of heating blanket for or ??????? What do you think would be best. Over head heat lamp or a heating blanket. I have never made a river board but really want to so any ideas and guidance would be greatly appreciated.

      • Like
    • 7 replies
    • 3.4k views
  15. Started by rodger.,

    A friend of mine runs a local store and bought this display case for his front counter. The seller said it was from about 1900 or so, but I doubt it is that old. Regardless, my friend wants to refinish it, and I would like to offer him some advice. Also, any chance of IDing the wood species? Mahogany, perhaps? Its a walnut colour, but it does not have the characteristic grain pattern of walnut. Thanks fellas!

  16. Started by RunnerRN,

    If any of you remember, I posted a year ago about piece that I had bought and wasn't happy with the way it was stained/painted. I spent months sanding the whole thing down, removing wood filler that was between the top three boards and trying to fill up the gouges in the construction grade lumber. I then tried unsuccessfully to stain with minwax. I just couldn't get an even coverage and avoid orange tones no matter what I did. The more I tried the worse it got. I probably sanded this piece down a few sizes in the process but used it as my learning piece. I tried oil, polyurethane, etc.. but wasn't happy with those either. Then I tried painting the base and using p…

    • 6 replies
    • 3.8k views
  17. Started by Tom King,

    Even if you just have one door that needs finishing, do yourself a favor and build a rotisserie. A screw is the pivot. Make the bars that you screw to the ends of the door some narrower than the door thickness. These are something over 30 years old. I don't bother to keep stretchers for them, but just use whatever is laying around. Anyone can spray like an expert when the surface is horizontal. With these, you spray one side, let it tack up, and spin the door over to do the other side. I have enough of these to do a whole house full of doors, but was only painting two this evening.

      • Like
    • 9 replies
    • 5.4k views
  18. Started by TDYER,

    I am desperate for your advice! This is my 2nd GF Java Gel Stain project. The first was an end table and it turned out wonderful. I used the stain more as a paint so didn't wipe off. This time- maybe because of the larger surface - i am having issues with streak marks. After 3 coats, i had a few streaks so added a 4th and still streaks. I need advice please! Should i put a topcoat on and then another coat of gel stain? Or should i sand? My plan was to gel stain the top and paint the legs with GF milk paint

      • Like
    • 3 replies
    • 3.1k views
  19. Started by Cliff,

    Anyone have a favorite technique for finishing quartersawn white oak? I'm looking towards Wood Whisperer's Grandfather Clock as an inspiration. I assume there is no problem with putting ARS on top of a dye, but I have no idea for sure. I'm open minded to some ideas. I've never used QSWO before, but to me it's the one wood that looks good with a stain of some sort on it.

  20. Started by nickinnh,

    Hello all, im new to woodworking and just about completed a new farmhouse table for our new home. Then I ruined it. The surface is pine, and I just applied two coats of Watco Danish Oil in dark walnut, with plans to poly after. The color came out well at first and then when it cured, it’s a blotched mess. I either totally spaced out or thought that pretreating the wood with natural oil was optional (as the can says), but it is definitely NOT optional. Please, is there a way I can fix this issue? I doubt I can use stripper on the cured product, and I’m worried about sanding since it absorbs. I’m totally destroyed. This went from a project I was p…

      • Like
    • 18 replies
    • 6k views
  21. Started by Meatwad,

    First off a big thanks to everyone for helping me through my issues so far. I have finally finished my workbench (with the exception of adding a tail vise later). I got my issues planing the red oak for my top solved. But now that I have it pretty flat and in good shape I am concerned about spilling liquids on it and just generally protecting it from splintering near the places where I've glued it. What do you all recommend for protecting the top of this bench? Poly? Oil?

      • Like
    • 10 replies
    • 7.7k views
  22. Started by alao,

    I had my stair ballusters finished by a contractor and I'm staining the remaining newel posts by myself. The contractor provided me the instructions and materials: 1) antique white base x3-4 layers, 2) sanding sealer x3-4 layers, 3) stain colour x1 layer, 4) lacquer x1 layer. I've tried following these steps and allowing a full day for drying in between steps. However, I can't seem to replicate the smoothness and evenness of the finishing the contractor was able to do on the ballusters. My stain doesn't absorb well which leaves streaks and makes it look blotchy. Also the edges and crevices look darker than the flat surfaces. How can I fix this? Thanks!

      • Like
    • 5 replies
    • 4.7k views
  23. Started by Meredith,

    I stripped and sanded a walnut veneer sideboard then applied Danish oil in dark walnut. A part of the wood along th bottom edge did not take the stain and is white. I was very careful to avoid sanding through the veneer, but it seems that may be what happened? Is this some glue below the veneer that is resisting the stain? Any other explanations? Thanks in advance for any suggested fixes. I tried to upload a photo here: https://ibb.co/jgnpDkP

      • Like
    • 6 replies
    • 4.5k views
  24. Started by Mercniac,

    Hello, I've been trying to finish a table top with epoxy, I'm using Total Boat Table Top Epoxy. After curing, the epoxy doesn't feel right. It's not sticky, tacky or soft. Its actually smooth, shiny and very hard and I cant make a mark in it with a screwdriver, but when I run my fingernails across the top they dont glide smoothly, they kind of drag, I can feel resistance and can actually hear a faint squeak sound. This is the second brand of epoxy and the second table top that felt this way. I have measured exactly by volume and by weight and mixed thoroughly everytime and temp. during curing has been between 73 and 78 degrees. If I lightly sand it feels fine. I need t…

    • 6 replies
    • 3.9k views
  25. Started by rinconmike,

    Hi. We have been working on a cubby system for the local High School band room to store the instruments as part of an Eagle Scout Project. Been working on it for 7 months. The cubbies are made out of 3/4" Baltic Birch Plywood and we decided to use Waterlox Urethane to finish. We have six of these with varying cubbies. Four of them have overall dimensions of are 27" wide, 29" deep, and 72" high and the last two are 78" high. Attached is a photo with one that has the most cubbies and also one showing the six together. We have done the three coats of Urethane over the entire cabinet and a fourth coat on the bottom and side inside of each cubby. Each coat was done around 2…

      • Like
    • 5 replies
    • 4.9k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.