Finishing
2,922 topics in this forum
-
Let me be clear right from the start I hate staining. I have avoided staining projects because I have problems sanding through the top coat on the edges. But lately I have been getting more requests to stain. What steps do you guys do to sand the top coat without sanding through it?
-
-
- 4 replies
- 3k views
-
-
Hello! I'm currently in the process of building a birch butcher block desk and was wondering what finish you would suggest to bring out the beauty of the wood and a durable coat for daily use. I'm a software engineer so I use many monitors and would like that something that would not case to much glare. Ill attach a photo of the birch block ill be working with. Thank you so much in your time in reading!
-
-
- 8 replies
- 30.8k views
-
-
I may have missed it.. But can I put varnish over a polycrylic finish? For some reason the polycrylic surface gets scratched very easily. And want to put a more durable finish over the poly instead of starting from scratch. Thanks in advance for the help.
-
-
- 8 replies
- 11.7k views
-
-
Question for the collective: tan cherry before or after danish oil application?
-
-
- 8 replies
- 3.6k views
-
-
Hi, I hope somebody can help. I have varnished a mid century Ercol chair with Colron Danish Oil (Georgian Medium Oak) and hate the colour! I had previously sanded this back and was hoping for a more natural oak colour, but the resulting colour is quite orange. A complete rookie error, as I know now I should have tried the colour first in an inconspicuous place. The chair is still drying, so there may be some hope still. However, is there anything I can do? I'm more than happy to sand back and start again, but is it too late? Any help or suggestions would be gratefully received! Thank you
-
-
- 7 replies
- 3k views
-
-
I was watching a facebook conversation on a group that I belong to. The person was looking for someone to help her refinish her table. Here is how the conversation went: "GGL: Hello! Looking for a crafty person that knows how to re-stain a wooden table and some pieces of the matching chairs, if you know how to and would have the time to do it and make a little $ for it please message me. TIA FP: I restained my own table <insert picture> GGL: Ooh!!! That is so pretty!!! Did you do it here in Germany? FP: No I did it back in Ft Bliss before I moved here! You'll need stripping, a sander (probably 100% easier since I sanded mine by hand), gasoline and the s…
-
-
- 16 replies
- 10.4k views
-
-
There is a french youtuber who added a product to BLO to stop it from being sticky once dry. In french it is called Decatif, but I have no idea what product it is and what it is called in english (see below). Have you heard of such an additive we can add to BLO to stop it from being sticky ?
-
-
- 3 replies
- 3k views
-
-
Been a reader for a while , getting tips and researching some things - this is my first time posting. Bottom of cabinet had water damage and I sanded it out and got some stain to try to match as close as possible. But, the sanded area is not taking the stain at all. It is way, way lighter than what it should be and is no where near the original color. I read where using a coarser grade of sand paper will allow the wood to absorb more color, but before I start again, I wanted to ask if there is anything else I can do to get the spot darker and as close to the rest of the finish as possible. Has anyone been able to successfully fix this kind of damage a…
-
-
- 10 replies
- 3.1k views
-
-
A buddy told me to add spar urethane to my Cabot oil based deck stain, said it would make for a more durable finish. The mix would be 8 onces of urethane to a gallon of stain. Magic or Myth?
-
-
- 17 replies
- 33.7k views
-
-
Hey! We did our house exterior with larch wood and stone. Larch was processed with iron sulphate and now there’s a problem. Sun dries the wood and leaves the white substance on surface, and when it rains it washes off leaving orange stains everywhere. How can we maintan the nice grey/brown iron sulphate colour and get rid of the white/orange substance what comes out of the larch? It is ruining our exterior stones ☹️ Can somebody give some useful advice?
-
- 3 replies
- 2.7k views
-
-
I'm building a gaming table with a recessed play surface...the walls of the recess are oak and they flex ever so slightly...I'm going to blue a piece between the wall and the table apron to secure but it will likely have a little give...what is a good finish that won't crack under flexion...it shouldn't be much but some...will polyurethane work or is there something better ..
-
- 2 replies
- 3k views
-
-
My husband and I put in Lowe’s unfinished oak cabinets that I stained with minwax oil penetrating dark walnut. Some of the doors did not take the stain very well and I got some blotchiness. One door in particular has a huge irregular spot that is super light and so noticeable as it is above my range vent hood and irritating to me. I sanded the door down to bare wood and added a pre stain conditioner before staining again and still got the same problem. How can I fix this? Could I use gel stain over the oil penetrating stain? Thanks for any help you can give me.
-
-
- 14 replies
- 6.8k views
-
-
Anyone have 1st hand knowledge and a opinion on the Rubio Monocoat finish?
-
-
- 4 replies
- 3.7k views
-
-
I'm building a bedside table for my granddaughter I wanted to dye the piece with honey amber Trans Tint dye. I tried some mixed with water it was kind of splotchy, I decided to add the dye right to the poly, I tried it on some scrap it worked like a champ. I think I will only do 2 coats of the mix then finish up with some clear. Has anyone tried this on a project? I don't see a downside not to try this.
-
-
- 8 replies
- 3.9k views
-
-
Hello we had our deck power washed, sanded and stained. The contractor talked us into a semi transparent stain which is way thicker than we expected. The worse part is that his guys used the same stuff on our teak patio dining table and chairs. can you advise as to removing this and restoring a more natural teak stain/look? https://flic.kr/p/2kTKqau thank you Donna
-
-
- 8 replies
- 3.3k views
-
-
Hello everyone, I got a secondhand maple wood dining table 4 years ago and decided to re-stain it. This is my first ever job trying to stain wooden furniture. I read a few articles about it on line and talked to guys at Canadian Tier about what all I need to do. This is what I did: 1. I started by using furniture stripper to get rid of the old stain. 2. Then I used 100 grit sand paper to sand the surface followed by sanding with finer grit paper (180 and finally with 220). 3. Then I used Minwax wood finish stain (colonial maple). I applied 3 coats of the stain and everything looked fine and I was happy with my efforts. 4. After this i applied a coat of…
-
-
- 44 replies
- 116.4k views
-
-
My wife bought a bunch of furniture with reclaimed wood. The most recent is a coffee table made from Azobe. I get the concept, and the rustic nature of it...but you just need to glance at it and your hand will be festooned with splinters. The boards are crimped and riveted into the metal sides, so taking them out to the workbench is not an option. I gave it about 3 hours of hand and ROS sanding last night from 60 to 220 - it's a little better, but any hand motion with the grain is still splinter city. Even if the sander caught an edge just right, I'd have major jagged tear out. So anyway..it's a difficult, hard, oily, wood. I could really use some san…
-
- 10 replies
- 7.5k views
-
-
I have a solid piece of mahogany from my childhood home that I am going to be using as a floating mantle over the propane fireplace in my new home. Originally the mantle was inserted in a large brick corner fireplace (typical 80s fashion! Haha). I have sanded down the mantle and I want it to have the natural look in my home - basically look exactly like it currently does. My question is, do I have to finish it with any stain or oil or can I leave it natural. Like I said, I don’t want to change the colour of finish of it. https://drive.google.com/file/d/1MQGOGPPh9HhuWDBKVQBGV52z6GccLRfA/view?usp=drivesdk https://drive.google.com/file/d/1KXm1kw3Atfxts8y…
-
-
- 5 replies
- 3.2k views
-
-
I sanded a very lightly stained inherited mid century teak veneer coffee table with 220 grit followed by 600, I applied a coat of Danish oil, waited 10 min, rubbed down with paper towel, waited a day, did the second coat (again waited 10 min and then rubbed off excess). All was beautiful. And then 4 hours later disaster and this is when I went off course. I noticed a dark scratch on the wood that I had missed. I sanded the spot out, with 220 and 600, and then tried dabbing the Danish oil in and wiping off, and then a day later, applied the second coat to try and catch up, but there is a dip and a colour difference. This morning I tried a third coat on the entire tabl…
-
-
- 6 replies
- 10.6k views
-
-
Hi. I’ve looked all over the internet and can’t seem to find the answer for this. I have a random orbital sander and anytime I use it I end up with these horrible lines running perpendicular to the grain. This has always been using 80 grit sandpaper. Would it go away after going up to 120 or above? I feel like it wouldn’t.
-
-
- 5 replies
- 6.4k views
-
-
Whoever built my house put a wood window in the bathroom--in the actual shower stall. Annoyance + laziness, we just taped plastic over it, but now I'd like to actually make it nice. I put Varathane (Rust-o-leum) stain to make it pretty, now I'd like to make it protected. What can I put as a topcoat?
-
-
- 8 replies
- 5.5k views
-
-
I was applying the 4th layer of the polyurethane finish to a new benchtop. After it dried, I saw some cracks that didn’t happen in the previous layers. Anyone knows how I can fix them? https://ibb.co/xgQwnLg https://ibb.co/xJMFD1h
-
-
- 5 replies
- 11.8k views
-
-
So, I've sprayed two coats of amber shellac on my bookcases. Why shellac? Because I've never worked with it before and wanted to try spraying some! Amber, because two coats gave me just the color I wanted. Now that that's done should I top coat it and if so with what?
-
-
- 23 replies
- 26.6k views
-
-
Hello everyone i am building a post and beam house made of pine. I’m about to put the roofing on. The roofing,from bottom up, will be wood paneling, mineral wool, wood paneling , asphalt rolls. my big doubt at the moment is how to treat the upper layer of panels to the inside of the roof. Condensation might become an issue between the mineral wool and the upper paneling. I am considering treating the wood to make it water resistant but worry about trapping moistures and keeping the wood from breathing. any help wood be very. I have appreciated.
-
-
- 1 reply
- 3k views
-
-
I am having a farmhouse/rustic tv stand made for me but having trouble finding the right stain color. He is going to be using yellow pine, but the wood pieces that are more white. The stain will be minwax. I have a few colors/pictures that I like, but not sure what they are. Some are a mix of colors I'm sure. Here are some colors I like but am open to other ideas. I don't like the real dark stains. My coffee table is a mix of special walnut, early american and dark walnut, but I can't remember the exact amounts and the wood was spruce, so I know it will take the color differently. The last picture is my coffee table. I tried the weathered oak on a test piece bu…
-
-
- 21 replies
- 27.1k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·