Finishing
2,922 topics in this forum
-
I’ve been French polishing nearly all of my projects recently. I know that shellac is vulnerable to breakdown if it is exposed to some chemicals (I.e. alcohol). Can a protective coating such as lacquer be applied over the shellac finish without losing the luster?
-
-
- 5 replies
- 3.5k views
-
-
I picked up a piece of live edge red cedar and am making a desk out of it. It had some spots where bark was visible in the top which I really liked and to preserve those I filled them with epoxy, my plan being to sand it to level before finishing. The epoxy filled those areas in nicely and is drying right now, and I'm trying to decide the best way to finish it as soon as that's ready to be sanded. I'm hoping to accentuate the grain as much as possible because it has all sorts of cool texture in it, but I'm inclined not to stain it because I think that wouldn't work well with a live edge piece. I'm also unsure of the best approach for this for a cedar piece as this is my f…
-
- 19 replies
- 18.7k views
-
-
I'm looking to upgrade my ROS to a Festool ETS EC 150/5 and also pair it with a dust extractor. I'm seeing conflicting info on the difference between the CT 15 and the CTM Midi. I know the Midi is rated M class and has bluetooth capabilities. Some sites/forums/reviews show the CT 15 as a glorified shop vac that can you can plug tools into while the Midi is designed to be paired with tools. Others just say the bluetooth and systainer capabilities are the only significant differences. I am looking to almost exclusively use the dust extractor with the ETS EC 150/5 while sanding. So will the CT 15 paired with the sander keep my small basement shop dust free during my fin…
-
-
- 3 replies
- 3.8k views
-
-
Im working on my first refinishing project and made a very dumb mistake. I’m used to painting old furniture, not staining. I am refinishing a very solid kitchen table and applied Varathane Poly + Stain and didn’t wipe the excess. Just brushed it on. I know... So now the poly + stain is dried and very thick. I can see wood grain in some places but not overall. It looks like paint at this point. What can I use to thin it out but not strip completely? I tried mineral spirits but I think because there is poly in the mixture, it’s not working...
-
-
- 5 replies
- 4k views
-
-
Hi all, I'm new here, and every other chat room so I hope this is how it works. :-) I have an old, wooden, ship's wheel, that laid on the bottom of the ocean for a number of years. It is partially worm eaten and has lots of very cool looking worm holes running through out the wheel. I would like to mount this in my home, and I'm not sure of how to proceed. Some of the worm holes are quite close to the surface, and the wood is very thin in these places. I'm torn between trying to strip the finish off, and shine up the brass and mount it like that. ( If I do that, I was thinking of maybe, filling the worm tunnels with some type of a clear resin to give the wood str…
-
-
- 13 replies
- 10.5k views
-
-
I have a customer that called me to help with fixing her cabinets. She hired a guy to darken the look of her kitchen cabinets. She is using General Finishes Java gel stain. She quickly found out that the guy didnt know what he was doing and left the job leaving the mess for her to deal with. He over sanded on most of the doors causing her to have another problem. She tried to do it herself and quickly learned she couldnt and the java is way to dark and looks like paint. It has not been top coated yet so was wondering what to do to remove the java gel stain without removing the mohogany cherry original finish? Not sure if the wood is maple, birch or oak. Attatched are…
-
-
- 6 replies
- 4k views
-
-
I want to pick someone's brain here that has experience in dyes, stains, shellac, and finishes. The table below has an issue that needs to be corrected. I've wet it down to show a little more detail that shows the blotchiness. I would like the edge to match or closely match the top of the table. Far as I know this is a walnut. What direction would you take? One suggestion I did follow is a unwaxed shellac with denatured alcohol 50/50, sand 220, 75/25, sand 220, then 100%. Well that did not turn out well. Removed the shellac and willing to try a dye stain first but the color. How or what should I use to match closely the color that is shown below? Thank you
-
-
- 6 replies
- 3k views
-
-
Ugh....those dreaded swirls in the wood from a hand sander. I sanded (electric sander) off the stain of a nice maple table and then sanded (by hand) with a piece of sandpaper to get rid of those swirls....but once I put on the stain...UGH! Those swirls are there. I'm attaching a picture of the top but it's not so viewable in the pict. Prior to staining I used a Varthane Wood conditioner. So, my question to anyone out there...how to fix this? Should I want till it cures and then hand sand it off (non-electric sanding)... Thanks for any help you can provide.
-
-
- 9 replies
- 4.5k views
-
-
couple of years ago -- used "GF gel topcoat wipe on urethane satin" over unfinished walnut and was not only pleased with the results but it seemed pretty idiot proof to apply which is important to me as finishing is my weakest set of skills -- gravitated away from that GF product to formbys tung oil finish which is no longer available -- can't seem to find that exact GF product now -- closest i can get is 'GF oil based gel topcoat satin' -- are these the same product ? both appear to be oil based topcoats with urethane -- just changed the name and the color of the can ?? it is impossible to talk to anyone at general finishes -- got a variety of yes they are and no they a…
-
-
- 4 replies
- 3k views
-
-
What do you guys think would be the best finish for wooden drink coasters? I've tried Nitro Lacquer. Some water makes it through the finish and the coaster cups a teeny bit but then flattens back out when dry. I like water white, so I am considering maybe a CAB Acrylic or pre-cat CAB Acrylic. Could also do Precat Lacquer, but its kinda yellow. Polyurethane looks too plastic-y. And using an oil rub doesnt really provide any protection. I want to do this with the least amount of time and sanding. I like the nitro lacquer because you dont have to sand between coats and it dries quick. CAB acrylic would be similar but I dont know if it provides any more wat…
-
-
- 5 replies
- 8.9k views
-
-
I am refinishing my grandmother’s cedar chest. Circa 1930? finish did not respond to lacquer thinner or denatured alcohol, so I sanded away. (Just the lid for now) I am up to 220 by hand and love the look and feel just the way it is. Can I leave it in the raw ? Box will be decorative storage in a spare bedroom so it shouldn’t see much abuse. Will the finish police track me down ? side note: after 90 years, the knots still gummed up my sandpaper.
-
-
- 2 replies
- 2.9k views
-
-
Last spring I started to get into HVLP spraying and have been doing a lot of test boards this fall. I have tried a few different brands with my Fuji Mini Mite 4 and here is my experience with each. General Finishes I have sprayed both High Performance and Enduro-var and have had great success with each. If you spray them where the wet coat has slight orange peel they level out nicely and the dry surface is glass smooth. They also don't have the plastic look that is typical with oil-based poly. The boards look great and are nice to the touch. Enduro-var does add some slight ambering but a 1# coat of SealCoat under High Performance does about the same. High Performanc…
-
- 5 replies
- 22.4k views
-
-
About how many coats are appropriate? I'm on my second, and wasnt sure about adding a third. For those experienced with this product, about how many coats do you apply? First coat was heavy, allowed to soak in for a while, and then wiped back. Left to dry 24 hours. Sanded lightly with 400, then second coat (not nearly as heavy as first), allowed to sit, and wiped back. Ill wait 24 hours, and then maybe apply a third.
-
-
- 15 replies
- 9.2k views
-
-
I've been sucking information from this group for years and decided it's probably time to try and contribute a bit, so this is more of an info thread than a real question. Recently there was a thread asking about using oil/wax finish as a maintenance coat over existing oil/wax. I have just finished a Maloof inspired low back chair and couldn't get my regular "Maloof" oil/poly and oil/wax blend from Rockler. It seems Rockler, at least for now, no longer carries the product. As a standby, I used Tried and True oil/varnish and oil/wax (beeswax) finish. Three coats of each per the instructions. The bottom line is that it wasn't the finish I had hoped for. It had a lower s…
-
-
- 15 replies
- 19.3k views
-
-
Hi, I have been doing some research on refinishing a mahogany side table. I have sanded it down (up to 120 grit) and am wanting to finish it with Tung Oil. I love the beautiful color and grain of the natural wood. Only, I have finished Mahogany before with stain and had gotten a blotchy effect - that with using a Wood conditioner first. Not sure what I did wrong but want to avoid this problem again. Shall I use a Wood conditioner before using the Tung oil? I have Varathane Pre-stain wood conditioner. Lastly, should I go up in sandpaper grain (to 220 or so?) (oh, and poly on top?) That's it! I'm new at this and have been figuring out things myself as …
-
-
- 9 replies
- 4.6k views
-
-
I have a question about Danish Oil. I finished a maple table with a Danish Oil color I thought I liked, but now want it darker. Would like to stick with Danish Oil. Can I simply additionally coat with a darker danish oil, even though its been a week or more later? I've put nothing but Danish Oil on it.
-
-
- 1 reply
- 3.1k views
-
-
Hi, I make art frames to order, in a variety of hardwoods and finishes. Some of the styles have very thin mouldings (3/8" thick), and sizes up to 24x36. I double-mill everything to ensure stability. The larger frames usually get a strainer (supporting frame within a frame) but not always. The process works well, but I've always applied a finish more or less immediately. Now I'd like to make some frames in advance, to take advantage of some down time, or to maximize the efficiency of a batch run. I'm concerned about stability if I leave the frames raw for a month or more until I receive an order for that size and spec. Normally I'd just slap on a wash coat of dew…
-
-
- 3 replies
- 3k views
-
-
Haven't got much feedback from other sources yet, so I will try you guys in this forum. Does anyone have experience with Walrus Oil Furniture Finish? I bought some and want to try it but a bit scared to throw it on the grandfather clock I am finishing up. Specifically a bit nervous about putting it over an oil based stain. https://walrusoil.com/products/furniture-finish Thanks!
-
-
- 10 replies
- 10.3k views
-
-
Hi, This is my first woodworking project ever, and it's kind of a major one. We tore all the carpet off our stairs and are attempting to refinish the treads. They were raw pine. We stained with GF oil based gel stain and that went fine enough. We let three weeks pass before we attempted to seal with Varathane water based floor finish. We went with water based because we have a roommate that lives upstairs, and we needed a fast dry time. Anyway, I cleaned the treads with mineral spirits and then went back to the top, tack clothed, and applied the finish, one tread at a time. It was looking great, until it dried completely. Random milky white spots showed up all over w…
-
-
- 6 replies
- 4.8k views
-
-
So i made this bench for my first project into woodworking. While i was gluing up the boards just weren't flat. i was sure when i screw them down they would suck in. But they didnt. so now i have a bunch of gaps between 2" and 1" boards. Now when i was all sanded i said this wont look bad. I'm sure after i stain it wont be noticed. Now as you can see i have 3 coats of poly on it. My question is. Between the boards there is nothing i can see through it. Can i use epoxy to fill those gaps maybe just to below the surface line. just tape off underneath and use a dark epoxy on it. other than these spots i love the bench and put alot of time into it. Thanks for any input y…
-
-
- 17 replies
- 4.9k views
- 1 follower
-
-
I have been interested to try General Finishes "white poly", but there is no-one anywhere within 12 hours of me that sells it. I thought, perhaps, that I could make my own paint/polyurethane mix. I have done some googling, and one person refers to this as "fortified paint". I have successfully mixed water-based poly with the dye stains that general finishes produces - pretty easy. But has anyone mixed" latex" paint with water based polyurethane before? I specifically use General Finishes High Performance Poly. I spray via HVLP. Anyone try this before? I attempted to email General Finishes, but they have no customer support email address, just some Facebook page …
-
- 7 replies
- 13.3k views
-
-
We're hoping you can help. We are putting in walnut counters in the kitchen and have read every page of the Waterlox site for help and problem solving. We're still stumped as to why we are getting this strange pitting, or waves in the finish. This is after four (4) coats of Original Sealer/Finish. We were hoping to see it smooth out by now. We really have done everything right from the beginning!
-
-
- 11 replies
- 4.6k views
-
-
Hi, I think my upcycled ply kitchen doors, with pine veneer, were previously waxed or something as I sanded at 100grit carefully so as not to go through the veneer, and then applied a thin coat of Danish oil and wiped off excess x2 but there are many places that will not absorb the oil. I'm concerned to sand more as the veneer is so thin. I'm happy to paint over with some kind of colour-tinted transparent finish, or very lightl stain them white if possible whilst keeping the grain visible. Any ideas to prevent the blotching or for suitable finishes, I'd be most grateful, thank you!
-
-
- 6 replies
- 3.8k views
-
-
I mistakenly used polyurethane thinking it was polycrylic and I need the smell/ this headache to go away. I applied a thin coat on 3/4” raw mdf used as a tabletop and let it dry a few hours before I had to throw it outside so I could sleep last night. I live in a loft in Brooklyn, Ny and my room doesn’t have a window so ventilation is pretty tricky. It is 35 degrees outside and I don’t have anywhere else to put it. Is there a way I can remove the polyurethane? Any advice would be super appreciated!
-
-
- 5 replies
- 3.4k views
- 1 follower
-
-
Okay, so I'm about to finish a modernize "old school stereo console". All air dried black walnut. I want opinions on the best natural finish. I hate the "plastic" finish look. I have been told that a tung oil/MS finish will give me the best "pop" of the grain and a very nice finish. Should I use a TO/MS finish or add some spar varnish? Also, i have been told to start with a 25/75 TO/MS mix and work up to a 75/25 TO/MS mix. Should I do this or just go with 40-40-20 TO/MS/spar??? any suggestions are welcome. thanks
-
-
- 25 replies
- 11.2k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·