Jig & Fixtures
489 topics in this forum
-
So I'm having the manufacturing floor at my workplace make these components for me out of acrylic for a more permanent mortising jig to use on my router. Looking forward to getting the pieces so I can get it all put together. I'll still need to drill out the holes to mount it to my router but I figured I can easily handle that part. Maybe I'll bring my router plate in, though, and have them do it after this part is done.
-
-
- 11 replies
- 6.7k views
-
-
I was surfing the other day and ran into Bridge City Tools and their web page. The 'Kerfmaker' caught my eye and I did some further investigating, to find that there are many shop made alternatives. I settled on a design by "JAY'S Creation" . His was very basic, I added a few upgrades and it does work well. My question to those who have and use this jig is, what is themost use you get from this guy. I have found that it is very accurate, but if it is used with a long piece, you run out of sled or table area to clamp the jig and line up the work. Here are a few photos of what I came up with. Oh, the place mat reminds me "Merry Christmas" to all!
-
-
- 76 replies
- 23.8k views
-
-
Saw this on U tube. Made mine from scraps. Works like a dream. I replaced the F clamps with Armor P7 HH Auto adjust hold down dog clamps. They work much better and faster than the F clamps.
-
-
- 11 replies
- 5k views
-
-
Is anybody using these? I know some of you must. I REALLY want this for a couple reasons. 1-Precision ! I mean, they look beautiful and they are aligned so well, why wouldnt i want to make this type of investment. 2-I light the ability to store it safely on the wall. I wish there was this option for more precision tools like my other squares. I currently have a t-square off amazon and the rivets that hold the 2 pieces of aluminum together are getting loose. Not even 6 months later. I mostly use this for tuning in my table saw fence. But I wouldnt mind just kicking it up a notch. Let me know what you love and what you hate about them.
-
-
- 20 replies
- 8.6k views
-
-
Made a not-so-pretty mortising jig to see if it worked the way I think it would... it sure is ugly but it works like a charm! I'm going to have one made out of acrylic at work soon.
-
-
- 9 replies
- 4.5k views
-
-
I had made one of these for my own dust collection system about 6 weeks ago. A friend saw it and said he liked it so i figured i'd make him one as a gift. The idea was to centralize the blast gates for the shop. This makes it easy to see which are open and quick to change the active line. I didn't think to take pictures until it was mostly completed, but it's fairly straightforward. The 6-port side has a layer of 5/8 plywood, then 1/4 ply strips to create the blast gate chambers, and a full-size 1/4 sheet to complete the sandwich. It's important to put the thicker sheet on the outer-most side so that you have enough material to screw the dust ports to without hav…
-
-
- 12 replies
- 9.1k views
-
-
After dozens of picture frames, I think I finally wore out my miter saw sled. Upon planning a new one, I was thinking about using some premade metal runners for the new sled. I do have some quarter sawn white oak in the scrap bin, so I could use that. Anyone use these before? Are they worth the cost and effort? http://www.leevalley.com/en/wood/page.aspx?p=65247&cat=1,43455
-
-
- 33 replies
- 9.6k views
-
-
(I moved this to the appropriate forum... had posted it in General Woodworking before... oops!) Going to be tapering some legs this weekend for that desk I've been working on... Basic tapering jigs don't seem all that expensive but I see a lot of folks online saying just to make one. Thoughts?
-
-
- 20 replies
- 7.3k views
- 1 follower
-
-
I've seen it around how some people like to use thick foam on the shop/garage floor as a backer for breaking down sheet goods. I'll be picking up a track saw this week and resurrected an old SketchUp file I made a couple of years ago. It's a cart for storing sheet goods and the back side of the cart has a surface made with foam and framed in wood. The wood frame would allow me to clamp the track in place, and to prevent the top section of the sheet from sliding down into the blade on a horizontal cut. I would also be able to quickly drill holes as needed in the middle area if I need to throw on a Quick-Clamp when breaking down something that doesn't quite reach the edge. …
-
-
- 19 replies
- 5.9k views
-
-
I am making a 45 degree crosscut sled and need suggestions in squaring the rear fence. I watched Jay's video and all he uses is a framing square, aligning the fence to the kerf on both sides. Is this close enough for small to medium boxes?
-
-
- 4 replies
- 4.4k views
-
-
So I'm at this auction last night and a friend gives me something that he won but doesn't need. It's a chunk of Corian (brand) material, roughly 14" x 30" and 3/4" thick. I'm thinking of routing some channels in it and turning it into a router table top. Or I might cut it into multiple blocks to use for table tops. Whether tool or end product it has me thinking. (It's a faux white marble tone.) But because it's still unmodified I'm open to ideas. What would you make with such an piece?
-
-
- 18 replies
- 5.3k views
-
-
I was asked for more detail about this item in this thread. Rather than take that thread too far afield I dropped this one here real quick-like. This was a second version of this helper and I'm afraid I didn't keep track of the build too well. Essentially I took a piece of 3/4" BB ply that was 7-3/4" wide by 8-1/2" tall. I drew a center-line along the tall dimension for reference and ran a 3/4" dado lengthwise to a depth that suited the digital unit. You want to watch for your battery access door requirements and not set the unit too deep (DAMHIKT). I had scrounged the unit from an iGaging product that functioned poorly as designed. Seems they figured…
-
-
- 6 replies
- 5.6k views
-
-
While scrolling thru the various offerings on Crosscut sled construction, I came across a helpful tip. I cannot take credit for it and don't remember the guy. After attaching the runners and the rear fence, make the kerf cut, but stop short of a full cut. Mill and prep the front fence, attach the pivot screw (usually the right hand side). With a framing square, get the fence as 'Kentucky Windage' close using the kerf cut. Clamp the adjustable side and flip the sled over. First drill a 1/8" pilot hole thru the base and the fence. Then chuck a 1/4" bit and drill ONLY thru the base. When you tighten the screw in the left side and make your '5 cuts'. If you are close there i…
-
- 1 reply
- 3.3k views
-
-
I spent a bout 1/2 an hour looking for a project that some member had built. It was a serving tray with box joints, but the bottom of the tray was narrower than the top. The box joints (finger) wer parallel to the base. Does anyone know what the procedure is for this? How do you achieve a tapered box joint? I know, I am full of curiosity today.....
-
- 1 reply
- 3.5k views
-
-
I'm a beginner woodworker and want to start making some reusable templates for use with my router. What materials do you recommend that I use to make durable reusable templates? Also I would appreciate any links to where I could find some of the more standard templates for purchase (like circles, letters, numbers, ect.) I've considered Plywood, hardboard, MDF, and acrylic, though I'm thinking the hardboard might be a bit thin to run the bearing on. I have access to a 3' x 4' laser to assist in cutting the acrylic or hardboard, so I'm leaning towards those right now. I'd appreciate any tips and suggestions.
-
-
- 12 replies
- 4.7k views
-
-
About to be in need of creating a table saw sled so I was doing some research and watching all the older videos again. My question is I have always had a basic sled but does it actually pay off in the end to make it a little nicer? Example is nick ferrys sled. David pacuito has something similar too. Thoughts? Waste of time and money?
-
-
- 17 replies
- 5.7k views
-
-
Just built my first cross cut sled. It cuts 90 degrees after the 5 cut test. But it doesn't slide very well on the table saw. Sticks as I push it across the saw. The runners slide fine in the tracks when not on the sled. I tried using the a sharpie to check for wear but I can't push it through enough to get any wear. Any ideas on what I did wrong? Thanks
-
-
- 16 replies
- 5.2k views
- 1 follower
-
-
I enjoy making my own tools and jigs. Looking for ideas for a bench dog clamp sim. to Veritas Surface Clamp. Would prefer all wood construction, but not locked in by that. Appreciate any ideas or suggestions. Thanks
-
-
- 4 replies
- 5k views
-
-
There's really nothing new here but since I just built this I thought I'd post it. I have needed a table saw sled for some time but just kept putting it off, however, I have an ongoing project that is going to require I have one for many repetitive angled and beveled cuts so it was time to build it. One thing I hate about using my table saw is all the dust that flies back at me and covers me in dust but right now I don't really want to build an overhead dust collection system. So since I'll be using this sled often I figured why not build in a little dust control - right! I already had the piece of Birch plywood from dismantling a shelf unit I build about 30 years…
-
-
- 7 replies
- 7.7k views
- 1 follower
-
-
Anyone here ever used the Beadlock system for loose tenons? I am nowhere near being able to afford a Domino and this looked like a pretty viable alternative in the mean time. Certainly not as fast but definitely seems effective.
-
-
- 25 replies
- 14.7k views
-
-
I've made a few of these. I got a little more serious on my last one and added a 3/8" thick slab of UHMW to the bed where the plane rides. Last Xmas I was gifted a Lee Valley Shooting Board Track but, had never gotten around to building it into anything. I am fitting some trim on a current project and needed to do a bit of shooting work so I took a break and built this version. Its pretty quick-n-dirty; just 3/4" BB ply, a chunk or two of walnut scrap and the track. The construction is pretty straight forward; a board about so wide and one enough narrower to allow for the track stuck to the top of it. In reality I clamped these parts to the top of the bench…
-
-
- 20 replies
- 7.8k views
-
-
I need to make a shallow 3 inch round hole in a board and I thought about using a router with a pattern bit. But, how do I make the perfect circle pattern? I can make square and rectangular patterns all day, but I need the circle to be perfect. most of the web examples show a jig for cutting larger circles, say 6 inch or larger. TIA, Jeff-in-KC
-
-
- 32 replies
- 14.7k views
- 1 follower
-
-
Dad always wanted certain bits close at hand. I came up with this for him. Pretty simple and made out of some pegboard, plywood and some scraps along with some purchased drill indexes. The "trays" swing out on bolts as axles and have the right rear corner rounded to clear the back. It mounts via a french cleat. And here it is on the wall at Dad's. You can see I made him a few spare wooden blocks that he can customize for his needs. They screw on from underneath so they can be moved around till he's happy. Those of you with open framed walls could even skip the box and just make the swing-out parts come right out from between the…
-
- 2 replies
- 3.8k views
-
-
Hi All, I am rebuilding my router table fence to have better dust collection and a split fence (among other features). I'm building the base out of MDF with the intention of covering it in counter top laminate (I have done this with other jigs to great success). My question is on the color. Not that the color itself matters, but the laminate I have on hand is fairly dark, and I'm wondering if anyone has ever done this and if they had issues seeing their work surface? I don't have any extensive eye-site issues, but I know most of these are white, which I assume is to amplify light. I would prefer to use what I have due to the combination of expense, and the fact that …
-
-
- 9 replies
- 3.9k views
-
-
In this video I demonstrate how to quickly upgrade some Harbor Freight aluminum bar clamps, turning $10 clamps into $30 clamps. This is a technique I learned from Paul Sellers.
-
-
- 13 replies
- 10k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·