Jig & Fixtures
Build jigs and fixtures for safer, more repeatable cuts. Share table saw sleds, router templates, drill guides, and custom workholding setups.
489 topics in this forum
-
Ever since buying the incra sled I no longer use my shop made miter/picture frame sled It's currently set for my sawstop, but is easily adjusted to any saw. It's free, I'm just looking to reclaim wall space. If you're near Portland come by. Will not ship I'll post pics in a bit
-
- 0 replies
- 3.9k views
-
-
Purchased it Wed. Assembled Thur. Used it yesterday for the first time. It's a thumb saver. Very practical. It or something like it would have paid for itself several times over had I had it Monday evening. Sent from my MotoE2(4G-LTE) using Tapatalk
-
-
- 49 replies
- 12.3k views
-
-
I need to begin trying my hand at making dovetails. The company who had been making these for me cant keep up with my requests. So I am going to give it a try. I have a box that has sides with depth of 22" and along the top of this I need to make thru dovetails for the side and top. What is needed I have no idea. Which Jig and Templates I have no idea. Do you believe that this is all once piece then dovetailed ? That's what it looks like to me. These are 1" Dovetails . I don't need 1" when making my own. Plus they are from a huge CNC router. Appreciate hearing your thoughts.
-
-
- 6 replies
- 4.3k views
- 1 follower
-
-
I have a batch of tops in 13/16" cherry to machine with slotted countersunk holes, and have an MCLS bit coming soon by mail. See the pic. Will use my Porter Cable 1.75 hp plunge router with the PC edge guide, and hope that is enough control for this. I watched a YouTube video of a guy showing this bit in use, freehanding through some 3/4" pine and making the slots maybe 1/4" long. It looks as if the guide will work, but I still wonder. What is your experience with something like this?
-
-
- 15 replies
- 4.4k views
-
-
I have seen in the background photos from some members a completed MFTC table, presumably from the fellow in Belgium. Has anyone converted the mm's to inches for a lazy old guy?
-
- 4 replies
- 4k views
-
-
Purchased this and can't get it to work right.Anyone have any experience using this with router table.Tried with dado blades on table saw .
-
-
- 25 replies
- 8.2k views
-
-
Anyone have experience with this dovetail jig.How can it be used on black and decker router table I mean where can I find a insert with lip that clips into table?
-
- 0 replies
- 3k views
-
-
Recently, I responded to a member asking about the INCRA I-box jig. I responded that I found the jig fussy and difficult to set up with satisfactory results. A few other member responded with positive reviews, so I decide to give the jig a third try. I spent the better part of an afternoon and still had joints either too loose or too tight. I decided to try a shop made jig with a joint that would be 1/2". I milled almost perfect sliders out of walnut and I had a near perfect 1/2" x 1/2" piece milled for the spacer. I waited for all the parts to dry (glue) and proceeded to make two matching corners of a box. They are visually quite good looking. However they are just a mit…
-
-
- 16 replies
- 4.9k views
-
-
Those of us short on space need certain things to be available when we need them but, stored out of the way when we don't. This is one solution I came up with for those times when you need a bit of extra space to assemble things on. The idea was to have something that would work at a couple of different heights and then collapse into itself for storage. I landed on the idea of "legs" that could slide together in a tall configuration and a short configuration. The leg pieces are all identical in size and configuration. I used stopped dados done at the tablesaw for the slots. I end up with this. It can hold quite a bit of w…
-
- 5 replies
- 5.2k views
-
-
I had a spare moment in the shop this afternoon, so I knocked out this jig. I am a recent convert to the green tool disease and a recent purchaser of the Domino 500. My hobby has me working with many different dimensions of wood, especially the thickness.I am familiar with the metric system, but have inches and fractions ingrained. I have found setting the depth of the Domino mortise to be almost a 'three hand' affair. When getting ready to use the tool I always had to get a scrap piece and make sure the depth was where it was called for. To shorten the head-scratching, I got a scrap piece and made mortises of the four smallest (4, 5, 6 & 8mm) at varying depths. I sto…
-
-
- 5 replies
- 5.2k views
-
-
I recently did my first 'raised panel' box top. Came out acceptable. So I researched and copied/stole the design for my own shop-made version. This will keep pressure against the vertical fence in the area of the saw blade.
-
-
- 8 replies
- 5.3k views
-
-
This is a combination of several jigs I have seen over the years. I use straight grain pecan (because it was handy) for a runner and built the bed from ply and tempered hardboard. The pin fixture that holds the part to be tapered is built in such a way as to free me from having to hang onto offcuts to help secure the next side to be cut; all sides can be cut without further adjustment. Mark your layout lines for the small end and the "stop" position for the taper. You put a hole in the center of the foot end which slips over the pin. Line up the smallend and stop lines with the blade-side edge of the jig. …
-
-
- 12 replies
- 8.7k views
-
-
You can easily make your own dowels in your shop using tools you probably already have. I don't have a lathe and really the only dowels I can buy locally are poplar or red oak. Occasionally I want a dowel of a different kind of wood. I saw this technique somewhere on the internet long ago and I use it any time I need a dowel. Here is what you are going to need: A scrap piece of steel. The one I use is about 1/8" thick. Scrap wood. Hand drill. Drill bits. Sander/block plane/knife. Drill press - optional. Step one- Take a scrap piece of steel and drill three slightly overlapping holes in it. The middle hole needs t…
-
- 2 replies
- 4.4k views
-
-
I'm looking for suggestions on building a compound angle drilling jig to make a stool with splayed legs. My drill press table rotates about a central axis, which covers one angle, but I need to build a jig to cover the other angle. Just wondering if anyone has a good suggestion, or even a photograph. I've got some ideas but would love to hear from anyone who has had already done this before. Thanks!
-
-
- 8 replies
- 7.1k views
-
-
This is about drilling a quick mortise on a finished piece, in order to install hardware, using a hand drill and a Forstner bit. Of course a woodworking router or hand tools will get the job done too, YMMV. I've seen this question asked a couple of times on these forums, and since I had to do it again during the weekend, I figured I could explain my process here for those who may take advantage of it. Required Tools: Drill press, hand drill, Forstner bit, wax, chisels, 3/4" MDF, scrap material. Steps: 1) Determine Forstner bit size and cut depth: Using your drill press, lay out your hardware and make a test cut on a piece of scrap to determine the righ…
-
-
- 2 replies
- 5.6k views
-
-
Was watching Rough Cut / Tommy Mac the other day and noticed his sled. It was on one side of the blade and so rode in one miter slot. Anyone else do this? What are the advantages or trade-offs? Sent from my MotoE2(4G-LTE) using Tapatalk
-
-
- 21 replies
- 11.4k views
- 1 follower
-
-
File this under 'stupid human tricks'. I keep all those random gift and other throw-away cards. If you go through your pile of them you will find many that are 1/32" or at least within the tolerance of my calipers. Tape a dozen or so into a block and drill a hole near one corner. Use an old key chain, beaded chain or even a wire twisty to keep them corralled. Now I have a known 1/32" spacer to set reveals on things that use them; they can be stacked up to increase the gap. On larger floating panel tops like this I forgo the space balls. I lay a dotted-line bead of silicone rubber in the receiving groove, loosely assembly the parts and sli…
-
-
- 9 replies
- 3.5k views
-
-
I'm falling deeper into the green Kool-Aid. I'm looking at the assembly tables and there seem to be two choices; with fences and without. For those of you who have a head start on me, what are the advantages to the more expensive table with the fences/rails? Are the two tables offered the same basic table? The two part numbers are: 495315 w/tracks& fences; 500608 basic table. If I opt for the more expensive table will I need a track saw and router soon? What's the next move?
-
-
- 11 replies
- 5.2k views
-
-
So I've been a big proponent of making your own sleds. At one time I had 5 cross cut sleds. I'm sure others have more I had some "honey do" mirrors and frames to make this month. A couple of the frames were a bit to big for my miter sled. Was about to make a monster sized sled when I saw the rockler incra 5000 sled sale price. Had a birthday gift card that I've been saving so I figured I'd give it a try. I also have a good buddy who kept telling me his miters were dead on with it I was skeptical! It took almost as long to set up and dial in as to make a new picture frame sled but once set up it is pretty dead on. After making 4 frames from 8 to 40 inches I c…
-
-
- 22 replies
- 6.4k views
-
-
While working around the shop I needed an extra hand (or arm) to help out, so I decided to create a handy little articulated arm. I made it out of some spare oak I had lying around and some copper tubing I had as well. Pictures: In-depth Video: https://youtu.be/18ls6XMhuT0
-
-
- 9 replies
- 3.6k views
-
-
Hola amigos, I'm in the planning stages of my next project being a built in closet system for my guest room for my work dress clothes. I'll have two hinged doors holding fairly heavy doors and 4 30" wide drawers. Normally I'd hit HD for supplies but after dropping $500 on mahogany ply,edge banding, and face frame material,that feels wrong. Is there a big difference between (what I assume to be junk) hinges and slides and another actual proper brand I should be looking at?
-
-
- 12 replies
- 3.5k views
-
-
A coworker wanted me to make him an umbrella pole. I'm not sure why he didn't just go buy one, but I said yes. Then I thought, what the heck did I get myself into, I don't have a lathe that can chuck up a 24" blank. So after searching for a 1.25 dowel and coming up empty I found a YT video of George Vondriska using a router lathe jig. I reproduced it and here are the results. Mine turned out slightly tapered but should work just fine. A few things I learned. That wooden handle doesn't spin the blank near fast enough, so I used a cordless drill. Bearings of some sort would keep the rod from wobbling in the hole and thus eliminate the taper I got.
-
-
- 10 replies
- 7.8k views
-
-
Last week I finished the pantograph I designed for doing inlay work on guitars. This is for use with my Dremel and flex cable. I did one simple test with it and that worked fine but I'll do some more before I cut into some nice exotic wood or Abalone. Since I built and posted the video I have modified the pantograph to mount my Dremel directly because I discovered the flex cable chuck runout was too great to do accurate work. Also, I have added a micro-adjustment to the stylus since the video. It's very smooth and precise so I'm pleased with that part of it. It will do 2:1, 3:1, and 4:1 reductions.
-
- 8 replies
- 7.3k views
-
-
These are the measurements on the ends of the fifth cut for my new sled. That's 0.0015 before / 4. I can live with it. Sent from my MotoE2(4G-LTE) using Tapatalk
-
-
- 63 replies
- 12.8k views
- 1 follower
-
-
Anyway, what I really accomplished today was to make a jig for cutting inside curves on the band saw. of course it's for small curves on small pieces, but that's all I'm going to need for the hall table project. When I watch TV the woodworkers cut the curves close *by hand* then sand to the desired size. I was thinking why not cut closer with a jig and ease up on the sanding. At least that's my intention. Next step is to make distance marks off the center point where the band saw can cut in for the starting point. I'll probably add 1/32" to it uniformly to accommodate sanding and any potential bandsaw drift. It turns on a couple of dowel ends. Quite simp…
-
-
- 28 replies
- 9.1k views
- 1 follower
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·