Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Jig & Fixtures

  1. I don't like to complain about a small shop since many do more with less room. There are times, if too many projects are going at once, that I don't even have room to put a sheet of ply on the floor. Opening the large door isn't always an option so here's what I do with BB ply. Silly, I know but, you never know what might help someone . . . I clamp the ply so it hangs off the bench, cut it just over half way, rotate, re-clamp and finish the cut.

      • Like
    • 21 replies
    • 6.2k views
  2. Started by lewisc,

    Just wanted to share a circle cutting jig I made up today. I've seen a few of them that slide to cut different size circles but this is set up to cut the same size circle for some stool tops. I glued a couple of hardwood runners onto a piece of ply Screwed and glued a stop on the edge Made a cut up to the stop. Marked a line 90˚ to the blade Measured the radius and drilled a 6mm hole super glued a small piece of steel in the hole To make the cut, the blank needs a 6mm hole drilled into the underside of it. It fits on top of the plywood (Apart from doing it freehand, I'm not yet sure how to make this without the hole). I then …

      • Like
    • 13 replies
    • 5.3k views
  3. Started by collinb,

    What's the preferred moisture meter around here? Should I spend $150, $70, or $15-$20? There's a wide range of prices. Is the quality difference significant?

  4. I saw some other 'old stroker' doing this in his shop. Stole the idea and have been using it ever since. There are times when I know I will remove enough material (and have enough to spare) that I just perform this task by feel. If my material can't spare much spoil I do this to assure a true first pass at the jointer. We've all had a board with enough twist in it to leave one end in the air if the opposing corner is held to the jointer bed. Tape a thin bit of scrap to this surface to split the difference. This small piece of scrap and the tape are destroyed on the first pass but, generally result in a usable reference surface for the remainder…

      • Like
    • 6 replies
    • 4.2k views
  5. Started by Marmotjr,

    Recent article on MakeZine if you want to source material: https://makezine.com/2016/08/18/25-brilliant-tool-storage-solutions/ Some are old (they even have a link to a classic food jar storage) or not overly useful for wood working in general, but I picked out a Couple interesting ideas I gleaned from this that may prove useful here:

  6. Started by Stew,

    I need to route a couple of shallow mortises with my edge guide and thought about using this method ,each board has two clamps holding them. Does anyone have any thoughts or suggestions? Thanks

      • Thanks
      • Like
    • 6 replies
    • 4.7k views
  7. Started by Richiep,

    I've been building end grain cutting boards for about three months now and I'm still on the learning curve. I built a simple glue up jig using some MDF and some surfaced 2x3 pine boards, I'm using White Oak for the culls. I then clamp the workpiece into the jig using pipe and bar clamps. I've had some good success with this but it has it's problems. One of which is "cupping" or "crowining" or "arching" of the glue up; i don't know what the term is, I prefer crowning. My process is, I'll make a long face grain glue up about an inch thick and cut that up into 2 inch strips. I'll take those strips glue them up and slap on the clamps and culls and let it set u…

  8. Anyone have any thoughts on this or use something like this? Lee Valley Vacuum Clamp System It's frustrating sanding wood and having it move around on the bench. Using clamps sucks big time/ moving pads are so, so. I haven't tried the hockey pucks either. I currently use a roll of rubber backing for floor rugs, but they get dusty and lose their grip then have hassle of wash them out to get sticky again. -Ace-

      • Like
    • 14 replies
    • 6k views
  9. Started by gee-dub,

    The BORG used to sell these 2" spring clamps for a buck each. I have a dozen or so. If you have already saved up enough of those depleted gift cards to act as shims, save just a few more. This trick has worked well for me over the years for decorative trim.

      • Like
    • 16 replies
    • 4.6k views
  10. Started by DiY,

    Does anyone know where I can find a used Mortise Pal ? I was building a Farm house table and I was upgrading my jointery with a Mortise Pal. Unfortunately I borrowed a Mortise Pal from a good friend of mine and had a slight issue with the router.

    • 1 reply
    • 3.4k views
  11. Started by bushwacked,

    https://www.woodpeck.com/hole-boring-jig.html?_bta_tid=06707492695476421803960484218729298581560199532610094562026468283417173916728785575437461278589065994523&_bta_c=0tpu5kxiixuj8yryd66dp5qdawizz seems to be a little pricey for the maybe 3-4 times in a lifetime you would use this thing. Unless you run a shop and really blow through table tops with your tracksaw use. Would it be worth the money if you were doing a ron paulk type of outfeed/work table that should last a long long time? Not sure on actual time savings from it ...

      • Like
    • 26 replies
    • 14.9k views
  12. Started by rodger.,

    All of my shop sleds and jigs use shop made (wooden) runners. I have been looking at the incra runners for a new sled, but they are mega expensive. Do you guys use mostly wood runners, even though they are subject to humidity changes and wear faster than metal?

      • Like
    • 12 replies
    • 4.7k views
  13. I was doing some layout for a vanity-top organizer that I'm making for the LOML. It occurred to me how convenient this is with the longer combo square blade I picked up so, I thought I would share. When I need to mark out control points for curves that are in the middle of a panel that exceeds my 12" combo square, I just slide in this 24" blade. I got it as a 'second'. It is made by PEC but, functions in the Starrett perfectly well. Add one to your Xmas list. You may find it comes in handy more often than you think. I stores in almost no space at all via a magnet on the inside edge of my plane till when not in use.

  14. Started by Stickjam,

    I have project where I need to somewhat mass-produce parts consisting of 1/8" thick bamboo ply (9" x varying widths) with 1/4" laser-cut bamboo ply stiffener assemblies glued onto the reverse. To maintain consistency and because of the somewhat diminutive nature of the pieces, I'd like to build a jig to clamp the panels and stiffener components together to glue them up. Has anyone ever used Corian to make jigs for glue-up? How readily does wood glue release from it? Thanks! -Bob

      • Like
    • 7 replies
    • 5.6k views
  15. Started by difalkner,

    I guess this is the best place for this, mods please move if necessary. I don't know if this should go here or in tools... Well, I posted the other day that my 20 year old DeWalt 733 planer died and that I would probably repurpose it into a veneer press. That is now complete. Here's the finished press - And the 'making of' video - Enjoy! David

  16. Started by rodger.,

    I needed to get out to the shop for a little "shop therapy", and decided to make a jig to sharpen my planer knives. I have a ridgid tp1300 planer, and I really like it - it has been a solid performer for years. The problem is that I cannot get blades for it - even amazon.ca has them as "unavailable". I have one double sided set (dull) and a new double sided set left in the package. I should be able to get a while longer out of this unit before I need to resort to calling ridgid and seeing if they even still manufacture these blades. Regardless, I did some resarch and came across DIY Tyler's solution on YouTube. I watched his video, which led me to a lumberjocks …

      • Thanks
      • Like
    • 8 replies
    • 7.3k views
  17. We sometimes have things pass through our hands that could be useful in the shop. It takes a bit of thinking outside the box but, for example . . . These little pieces of plastic are under the cap and on top of the product of an antiperspirant I have been using for some time. I can't tell you how many of them I have tossed into the recycling bin. I finally started saving them as "painter's pyramids for long, thin or lightweight items. A friend's wife is addicted to International Coffee products. The plastic containers work great for random stuff I keep around but, don't need at my fingertips. The lids are reasonably secure and th…

    • 2 replies
    • 3.3k views
  18. Started by rodger.,

    Had to paint a 18' wall above the stairs. Could not get a ladder on there safely, so I made this platform from plywood. I made a simple box the height of a stair, and then attached a 20" platform to span the next step up. Finally I added some outriggers to hit a third step. Nice and sturdy to place the extension ladder on! We had one guy hold the ladder at the bottom, and the other climb up to cut in! Perfect! If the railing had not been there, I probably would have bolted the ladder to the platform. The railing was there as a safety net to ensure the ladder could not slide. Of course, safety first! We were sure to test it and have a guy at the bo…

  19. Started by Richiep,

    Hey All, I'm going to be building a circle jig for my bandsaw and I'll need some sort of "pivot pin" to mount the stock on. I've seen variations of this where some use a wooden dowel and other use some kind of metal pin. I'd prefer to use metal because you use a smaller diameter and still get the strength. My question is what kind of metal should I use for this pin? Where can I source it? Thanks Rich

      • Like
    • 9 replies
    • 6.2k views
  20. Started by difalkner,

    I don't know if this should be here in Jigs and Fixtures so please move it if there's a better spot. In making the guitar bridges I use my spindle sander to sand the wings on each end of the bridge. But all I have are 80 and 100 grit sleeves so I was all set to order some finer grit sleeves when it crossed my mind that I should just make some. I didn't check to see if there are dozens of 'how-to' videos on this but rather decided to just use what I had on hand and go for it. Here are the completed sleeves yet to be unwrapped - And here's the video on making these - Enjoy! David

  21. Started by Marmotjr,

    As we have to bring most of our own tools to work, I had to make a quick swing by Harbor Freight to pick up a couple things I needed that I didn't have, and could easily replace with higher quality pieces if needed when they eventually break. So I picked up this piece of crap for $3: The handle is complete junk. Feels chintzy in the hand, hollow plastic. If you squeeze too hard, the handle will shift and bend. But the ruler is etched and painted, and dead nuts accurate per my other measuring devices (checked on a few). Pretty solid ruler IMO. The knurled nut is pretty nice, except it turns out it is a M6, and my upgrade required a M6x24 - 1.0 Carriage…

      • Like
    • 6 replies
    • 3.6k views
  22. Started by gee-dub,

    A few recent threads talking about end vises and tail vises got me inspired. I finished this bench a couple of years ago and never really missed the end vise I had planned for it. I guess I wasn't fully convinced that the twin screw vise was the way to go as the twin screw front vise on this bench was my first one. At any rate I decided to move this along. A lot of posts about folks having trouble mounting these vises led me to follow all their recommendations for success. Basically the secret is to read the directions, read them again and then follow them carefully. My front twin screw went in without issue so, my thanks to all those who made posts back then. …

      • Like
    • 10 replies
    • 8.1k views
  23. Started by Mārtiņš Elksnis,

    This is how to make fast jigsaw table, All you need is unused table and some peaces of scrap wood.

  24. About got the Chinese 1/2 blind dovetail jig tuned up. Followed directions and watched several videos. This is the second practice box I've made cutting with both sides of the jig, left side cuts made in the left side of the jig and right side cuts made on the right side, labeled as instructed, cuts positioned as mirror images. Both practice runs came out the same with the exposed pin on the bottom with cuts on the left side of the jig and on the top with cuts made on the right side of the jig. What cut order do I use to have the half pins exposed on the same side?

    • 5 replies
    • 4.6k views
  25. Started by gee-dub,

    There are times I wonder why I have an "L" fence. I just got a reminder . . . Some jigs have zero-clearance wear surfaces. This dado jig is not supposed to but, I learned on version 1 that the occasional ham-handed individual (that would be me) may be too impatient to let the router wind down before removing it from the jig, misjudge his trajectory and take a bite out of the jig. Because of this I made the jig restore-able. The ZCI is made via a reference surface where a PC collar rides during operation. I like this method since with the collar and the bit well centered, router body orientation is of no consequence. However, I need to use thi…

      • Like
    • 14 replies
    • 4.4k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.