Jig & Fixtures
489 topics in this forum
-
I had planned to dovetail one of my phenolic ZCI's to allow replaceable inserts but, never got around to it. Rockler had a clearance sale and the price on this commercial version was fair. I had held off putting it on until I could make some replacement inserts for it. I am still on "light duty" so rather than wrestle a sheet of 1/4" MDF or hardboard I dug some resaw-spoil out of the scrap bin. I milled the scrap to 1/4" thickness and ripped it to width. I used the commercial insert to set the dovetail angle. A Marc Adams style push block works well for this long thin stock. OK, that part fits. I used a magnetic featherboard as a stop to cut th…
-
-
- 7 replies
- 4.2k views
-
-
If you know anyone who has a new baby you need never search for glue cups again. Purveyors of Pureed Peas never knew their contribution to the woodworking community. Also great for testing finish colors. Generally yours for the asking. I almost cannot use them fast enough.
-
-
- 8 replies
- 4k views
-
-
I've built a used the router sled for flattening slabs made famous by Nick Offerman a few years back. Multiple YouTube videos now on how to build them correctly, including one by Marc. Im having an issue with mine that I've not seen addressed in any of the videos that I've found. I have a 4 foot wide slab in the shop, which means my sled is about 5 feet long. Im having issues with the sled sagging in the middle from the weight of the router, causing a slight dip in the slab in the middle. Im not pressing down with any more or less force in the middle vs the ends, so I think I need to make a change to the structure of the sled (all made with 3/4" ply). Anyone have a si…
-
-
- 28 replies
- 13.4k views
- 1 follower
-
-
Had a bunch of this type of threaded insert leftover from a job last December and I need a supply of star knobs for a few upcoming jig builds. Here we go. Scrap 3/4" plywood. The geometry is trivial but I think it looks cool: 3" circle defines the total size. Swing the compass six times around the outside as if you're drawing a hexagon. Then drill three 1 1/2" holes around the edge. While things are still in a big sheet, it's convenient to drill the center holes, drive in the inserts, and run a roundover around the holes. Cut apart at the band saw. These inserts are 20mm which is longer than the thickness of the plywood. Moreover, I goofed th…
-
-
- 12 replies
- 5.3k views
-
-
Saw it in the new shop notes mag this month. looks interesting. i would be interested in a review if anyone would share.
-
-
- 4 replies
- 6.5k views
-
-
If you have bandsaw door hinges like this. It may just be my inherent natural lack of coordination. One thing I dreaded most about changing bandsaw blades was putting the darn doors back on. I would get one pin lined up and then have it slip off as I tried to align the other pin to drop the door into place. Take a few moments out of your life and grind (or hacksaw) one of the pins to make it about 1/8" shorter than the other. I chose the lower pin on each door. For me, this now means that I can hook the upper pin into the hole and swing the lower pin into position with much more poise. This whole thing may be moot if you are natur…
-
-
- 6 replies
- 4.2k views
-
-
My previous vise gave me ideas for how to simplify this one. I glued up some scrap 3/4" BB ply to make a pair of blanks about 4-1/2" by 12". This is obviously for smaller saws. Then I used the router table to cut a clearance groove in each. To make it even simpler you could build this up gluing different thicknesses of ply instead. I knew the clearance I wanted and standard thicknesses were not going to get me there. I used the tablesaw to put some bevels to allow clearance for the file handle (and my hands). I cut some mortises and pulled a couple of floating tenons from my stock. I waxed the tenons to keep them from sticking. The…
-
-
- 4 replies
- 4.5k views
-
-
I'm looking for advice or help. I would like to make chests or cabinets at least 45" to 48" long. Is there any way to get a dovetail jig to accomplish this or am I going to have to modify a few togeather?
-
- 8 replies
- 4.3k views
-
-
Does anyone have one of these? If so, where do you get your replacement paper? The stuff from Deulen doesn’t seem to last too long.
-
-
- 8 replies
- 4.4k views
-
-
I do not saw many mitres, however my wife has been suggesting I make several frames, and I must admit that my readiness to make a mitre fence for my Hammer K3 tablesaw was really about the challenge more than the eventual projects. I had seen this mitre fence sold by Felder, and went oooh ... Of cause the asking price is just silly. And then I watched this video ... https://www.youtube.com/watch?v=BG9LRnB9-Hg ... which looks like an MDF version, and said to myself, "I can make that". And so I did (well better ... of course ). The fences are extruded aluminium to which are fitted flip stops. These are essential for sawing exact and …
-
-
- 6 replies
- 4.1k views
- 1 follower
-
-
Something I knocked off my list while watching shellac dry . . . in other words, it took no time at all. If you are like me you use your shop vac for many things. One of mine is Dust Deputy equipped and is used for powered hand tools like a ROS, jigsaw or the router. Most of these tools have ports that cause my shop vac blower to try to turn itself inside out over the resistance at the port. A common way to solve this is to use a bleeder. My bleeder was built into my wand handle. This was OK as I just put the wand handle in the path and opened the bleeder to the appropriate amount for the tool in use. I'd always wanted something just a bit more elegant and whil…
-
-
- 3 replies
- 4.2k views
-
-
So I have been making alot of boxes this winter, and my most recent one I am using mitered liners to keep the lid in place. I didnt want to have to try to nail the fit perfectly off the table saw, so I thought making a shooting board for mitering box parts would be a cool idea. I have a jointer plane to use on the board, at least until i buy a low angle jack. I dont see myself buying a dedicated shooting board plane anytime soon, if ever. But thats beside the point. Anyway, I picked up some Baltic Birch plywood, and milled up some scrap 4/4 cherry Im using up. The last batch of cherry I picked up from the yard, a few of the boards had quite a bit of sapwood in it, so shop…
-
-
- 5 replies
- 7.2k views
-
-
Not really a Jig or a Fixture but, seems like it would go here none the less . . . Your method of doing something like this will vary with your storage methods. I use Plano boxes for screw storage. I stick a piece of "ruler" marked tape to the lid. This gives me a quick place to check fasteners right where they are stored. I just use a piece of the tape that is 4" or so long. I don't care that it doesn't start at "1" or that it reads in reverse. For its purpose it is useful from any random whole-inch starting point. I space the tape off from the edge of the lid a bit for pan head and washer head in order to assure a good measurement as I …
-
- 2 replies
- 3.9k views
-
-
I saw these a while back and made about eight or ten. Problem is now I ve no clue what their function is. Anyone have a clue?
-
-
- 8 replies
- 4.3k views
-
-
One thing about being in I.T. since mainframes reigned supreme, you are around for a lot of out of date hardware disposal. I picked up this tape reel storage cabinet back when tape reels switched to tape carts. I gutted the reel hangers and have used it for many things over the years. As the space in my shop seems to get ever-smaller I am always looking for better ways to store the things I want at hand. The tape cabinet used to look mostly like this. I grabbed some scrap and cut a few dados. Made a few of these. And now it looks like this. I use the smaller shoe boxes for Drill Doctor stuff, small power tool DC accessories, gl…
-
- 1 reply
- 3.8k views
-
-
All this work forced my hand. Had to get the clamps off the wall -- too much hassle to get to was things store in front of them on rolling tables. Still, it's not got a lot of extra room. But it will suffice for a while. Design tip: for 6' tall sides make your angle cuts at 4 degrees on a 16" base.
-
-
- 14 replies
- 4.3k views
-
-
This is more of a tip than anything else but this is as good a place to post this as any, I guess - It occurred to me this afternoon as I reached for a couple of the wedges I keep handy that maybe this isn't a normal 'go-to' for some folks so I thought I would share this. Often I find myself needing to support a long piece for driving screws, chiseling, drilling, etc. and sometimes there just isn't a convenient way to do this. So, a long time ago (eons) I cut a dozen wedges of Maple to use for jacking a suitable block to support another piece. The photos below will far better explain what I'm rambling about - 42" long piece of Walnut and needing to chisel out…
-
-
- 12 replies
- 5k views
- 1 follower
-
-
First I should explain that I get a twisted sort of kick out of making things like these out of discarded IKEA furniture; a TV stand in this case . Another small to-do I have been meaning to get to since . . . . well, its been a couple of YEARS since I bought this Ridgid vac at a Home Depot Black Friday sale!?! I have one of these that I call version 1. It was made on-the-fly out of some real crummy particle board as a prototype. It has worked fine and so still survives. I will move this version 1 over to the drill press / small bandsaw area and version 2 will become the main shop vac / hand held power tool vacuum system. Both version 1 a…
-
- 2 replies
- 6.1k views
-
-
I have had this 'version 1' made from a chunk of 2x4 for so long I forget when I made it. You can use a normal tape measure scrap and just divide by two. I printed this scale that I stretched/shrank until it was half scale. I then "laminated" it with some packing tape and glued it to the 2x4. I looked for the scale diagram file to attach here but, it has gone the way of the wind. The idea was to just get close but, I find I can get darn near dead-on nearly every time.
-
- 2 replies
- 3.4k views
-
-
One of those things you do without thinking to share . . . I needed to cut a 1/2" rod in half and had to be pretty close as it was already a bit short for the application. I drill a hole the size of the rod through a piece of scrap. I then cut a cross into the scrap at the bandsaw. The long cut only has to go just past the rod to allow the saw to make the cut. The short cut as to go far enough past the rod to allow the vise to apply some squeeze to hold the rod still.
-
- 7 replies
- 5k views
-
-
Bought 4 inch female to female plastic connectors for the dust collector so I could add blast gates. They are supposed to be a friction fit so great no pipe clamps to mess with just stick 'em on and go. Except of course they don't fit. The inner diameter is about a millimeter too tight. Ugh, I don't want to drive these back to the store, the rubber ones are twice as much and why should I believe they're gonna fit. Then I got this idea. Stuck them on the Cole jaws, quick kiss with the carbide tools, a little 60 grit clean up and voila, perfect fit.
-
-
- 7 replies
- 4k views
-
-
Anyone besides me watch Woodsmith Shop (PBS/CreateTV)? This season they're doing a quality router table with mortising jig. Looks like a Summer project for me. But I"ll use a different table and concentrate on their mortising attachment. My recent mortising attempt will be converted to this better design. But it needs one change -- the ability to clamp in a board end for mortising. The original design only does sides.
-
-
- 10 replies
- 4.4k views
-
-
Like Dr. Who this is the first iteration. The router (DW611) is fixed with a 1/4" gap under the bed. Two fences to allow precise sizing. And removable when I wish to go in from either side with a wider piece. Plus plexiglass when my marks are out of sight. This way I can just work from the router side and pull the wood into the bit and use the marks and/or fence without either being blind to the mark's positions or having to wrap the marks around the piece. The bed is long enough (20") to accommodate long boards and avoid flex issues. Router is easily removed.
-
-
- 10 replies
- 4.5k views
-
-
Doing up a box for a birthday gift (day after xmas ). Was having a hell of a time getting the box to stay square the dry run. Coulda used some spring clamps from work, but that'd put gouges in the face, and I don't want that. After bemoaning the lack of strap clamps that are on my xmas list, I came up with this solution. Some rabbeted cauls I had saved from another project, and voila! It really helped I had 3 cords that were easy to put on, but still afforded adequate pressure. So if you're in a pinch for clamps, off the beaten path sometimes works too.
-
-
- 8 replies
- 4.6k views
-
-
I don't have a jointer and need to get straight edges on long boards for a table. What are your opinions on using 97"x1.5"x4.5" extruded aluminum as a straight edge for a jointing jig to use on my table saw?
-
-
- 5 replies
- 6.9k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·