Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Video and Project Showcase

Project showcase and videos.  Post video journals in the Journal section

Posting Rules

This space is not intended for spam or to drive traffic to your channel/site. If you post a video, please be sure to include a paragraph of text about the video and make sure the video is embedded. The forum usually embeds the video automatically if you drop in the link. 

  1. Started by Mark J,

    Here is the piece I have been working on most recently. It's something different than the ones I have been doing, but it's a shape I have been wanting to explore. My wife and I have been staring at it for a couple of weeks now pondering names, but I think that I like the name "Canopy". I was going for a form that was tree like and Canopy speaks to the very broad arching rim. The piece is walnut about 5" high and 12" in diameter. The story on the wood is that I acquired this really large piece of walnut from a friend for the really enormous price of 5 actual American dollars because it had a good sized nail imbedded in it that became appare…

      • Haha
      • Thanks
      • Like
    • 9 replies
    • 4.9k views
  2. Started by PPBart,

    About 20 yrs ago after my parents were dead we had to clean out their house. In a cluttered store room, under a pile of junk, I found an odd (at least, to me) treadle-style sewing machine base. At first I though it was broken or incomplete, but a bit of research into the White Sewing Machine Company showed otherwise. I couldn't think of a good use for it at the time, so it went into my storage room to collect dust for another couple of decades. I recently decided that I needed a nicer TV stand for my home office, and that White machine stand came to mind. I played with the design for a while, first thinking I would try to match the ornate curves of the base, but that just…

      • Like
      • Haha
    • 4 replies
    • 3.7k views
  3. Started by difalkner,

    I've already posted about the plaque I made for my friend but this is the video with every step documented, something I don't do often. I've been asked a hundred times what are all the steps in making something like this plaque so I figured why not show it in a video; there's a lot more to it than many realize, especially if you don't do work like this. Be forewarned, the video is 19 minutes long. Some sections and steps are at real time, some are sped up. There may be steps you'd omit and there may be some you'd do differently but this is what I do when I make something like this. David

  4. Started by difalkner,

    I play guitar for a young lady with an amazing voice and fantastic spirit, just very enjoyable to be around. So I decided to make something for her as a surprise. She's coming over tomorrow night after band and choir practice and you know how it is when you make something for someone - you want to give it to them right away! But I have to wait one more day. One thing I detest is Facebook but I have posted the progress shots on my page and her mom has been following along and commenting, not knowing this is for her daughter. This is a plaque I designed in CorelDraw and exported to Fusion 360 for cutting. I originally tried it as a trivet with the cuts going all the …

  5. Started by difalkner,

    I built two of these for a friend and just finished them today. They're about 10" x 13" x 2" and made of Walnut, finished in Nitrocellulose lacquer. The frame holds an 8x10 photo. David

  6. Started by difalkner,

    While I'm waiting on the Shelix cutterhead for my jointer to move forward on the audio rack I'm working on a very large Hard Rock Maple cutting board, at least it's large to me - 18" x 24" x 2" thick. It weighs about 32 lbs. which is fairly stout, I think. Matter of fact, the hardest thing about doing one this size is difficulty in handling the glued up board. It will have a juice groove along two edges of one side and the other side will be laser engraved with a family crest. Obviously, the side with the juice groove is the working side and the laser engraved side is for show. TB III is used because it's FDA approved for food service items, plus it gives a few m…

  7. Started by treeslayer,

    Finally finished this project, nothing special about the cabinet but I think the doors are cool, 1/8” X 3/4” strips of oak and walnut in a weave pattern, corners are M&T joints, 3/16” grove to hold the strips, thanks for looking, comments, criticism, questions always welcome.

  8. Started by Chet,

    I made this Sepele box because I wanted to try some different ideas. The top is shaped with a spoke shave, the indent in the lid was done with a core box bit and the the joint for the dividers in the box was done with a vee groove bit. I had seem Matt Kenney do this and thought it looked a little more elegant then a regular dado and the angles match the angles of the mitered corners. The lid handles are Wenge. The finish is one coat of blonde de-waxed shellac and a top coat of EnduroVar. Vee Groove detail. This second box is from a class I took through the Austin School of Furniture Design taug…

  9. Started by collinb,

    Small things. One to sell, one to gift. I think that’s mahogany. Might be a walnut. Not sure. One of my estate sale pickups. Tung oil makes it rich. (Apologies for the phone rotation.)

  10. Started by difalkner,

    This is for an administrative assistant in a local school and I have been wanting to use some of my veneers so this looked like a good project for that. Madrone Burl on Maple, 12" x 3" by 7/8" thick, finished in Nitrocellulose lacquer. I didn't try to fill the pores - one coat of sealer, one coat of semi-gloss. Front and outside profile designed in CorelDraw, exported to Fusion 360, engraved with 0.25" 60° Amana bit, profile cut with 0.25" Whiteside compression bit. Back designed in Carveco and engraved with the same 60° bit. Cut veneer to fit oversize Maple blank - Glued veneer with TB I and pressed in my veneer press - On the CNC - …

  11. Started by difalkner,

    These two aren't related but I just wanted to offer up what I did yesterday. The V-bit carving is for our church office manager. They have three dogs but I guess Ruger is the most photogenic. This is cut into Maple and is about 6" x 10". The US Flag is for my 16-year old nephew. He asked for a simple one he can hang on his wall and this should work just fine. It's about 21" across and made of Baltic Birch. I just think it's awesome that a 16-year old wants a US Flag on his wall! Both are finished with Nitrocellulose sanding sealer, then wiped with Mohawk Van Dyke Brown glazing stain which is wiped off about as soon as I apply it, then the final coat is se…

  12. Started by difalkner,

    A couple of months ago I cut one of these out of Beech and Red Heart but the Hebrew wasn't exactly right. So I reached out to a few people and now have the Hebrew correct (I think!). Well, I finally had the opportunity to get the CAD/CAM work done and cut four of these in Pine and they came out good. They're not as clean as the Beech but that was to be expected. It's a different look than the Beech but still appealing. These are 10" wide by 11" tall, finished in semi-gloss Nitrocellulose lacquer - David

  13. I had a request for a mountain scene cutting board, laser engraved with names and wedding date. I've done a few of these and they come out looking nice but I doubt one ever gets used for anything exception kitchen art! I drew the original design in CorelDraw where I exported it as an svg to bring into Fusion 360. From there I did the CAD/CAM work to cut the Maple, Walnut, and Cherry. These pieces are about 3/8" thick and the backer board is about 7/8" thick. Everything is glued with TB III and the feet are silicone with SS screws and washers, so everything is FDA approved. After cutting the mountain scene and gluing it to the backer board it goes to the tab…

  14. Made this one out of Red Gum for the granddaughter, hidden behind the drawer is a musical movement that starts and stops when the drawer is opened, the movement is from http://www.themusichouse.com , if you haven't had a chance to make a music box these are the best people to deal with, awesome folks and a wide selection of movements. not continuous grain all around just 3 corners, the wood is a little thick for my taste but this stuff warps pretty easy and i was getting some bad chip out on the planer so i quit while i was ahead. the drawer box is Sapele, finish is ARS, 3 coats, as always thanks for looking folks, comments-questions are welcome, a special thanks to @Coop…

  15. Started by Mark J,

    This was turned from a single piece of cocobolo 8 ½” square by 17/4. The surface is sanded to P1200, but with no coatings, just au naturale. With successive convolved designs I have been looking at what happens when the contour lines of the upright and basin are altered. With Sedona the upright and basin are both formed from straight lines. In many ways this shape was the most difficult convolved form to design, engineer and make that I have done so far. For one thing I had to be very particular about the acute angle in the corners. It’s about 40 degrees reflecting the fact that my diamond detail tool is 36 degrees, so about as tight a space as I could work in. …

      • Haha
      • Like
      • Thanks
    • 13 replies
    • 5.4k views
  16. Started by treeslayer,

    This is for grandson #2, butternut and walnut, box joints, sliding tray in the top. It’s been a long time since I mortised in hinges by hand but I think they came out ok, 95 degree stop hinges from Rockler, lightweight and not much money but they worked well. As always thanks for looking and comments are welcome as usual. Now on to #4, Red Gum wood with a bottom drawer that has a hidden musical movement behind it that plays when she opens the drawer.

  17. Started by TheFatBaron,

    Since switching coasts, i haven’t been doing a ton of woodworking aside from some small outdoor projects and a couple random things. Since I finally finished my workbench a year or so ago, I’ve been doing a little more. With the enforced home time here in the Seattle area recently, I finally got around to making an end table using the last of the hickory I brought out from NJ.

      • Like
    • 8 replies
    • 5.1k views
  18. I posted a few photos of this project in progress in the What did you do today thread, but thought I'd post a few of the finished piece here. The table top is a veneered (shop sawn) mesquite breadboard with ebony accents. I made it first so that the finish could have a long cure time while I built the base. Once that was done I started on the base while I waited for the leather straps to come. I did all the M&T joinery on the PantoRouter - made very quick work of it and very accurate. Then it was on to the drawer box and assembly. Again, dovetails and box joints were done on …

  19. Started by treeslayer,

    Built this for my grandson, he needed someplace to keep his wallet, watch, coins or whatever, walnut and butternut, I made the box joints long and tapered them from top to bottom, not much taper only 1/4” should have been more, hidden drawer on the bottom back held in with rare earth magnets, this is # 2 with 2 more to go, thanks for looking and as usual comments or questions are always welcome

  20. Started by difalkner,

    I grabbed this photo off our Pastor's FB page and will give this to him tomorrow at church, so he doesn't know I did this for him. This is a photo V carve that I did in Carveco and cut into Maple, about 6" x 11". I used a 60° V bit from Amana and this is my first time to use their bits. This one cut extremely well, btw! Absolutely no tear out on the carving and very clean across the entire board. The finish is my fairly standard for this type of work - Nitrocellulose sanding sealer, Mohawk Van Dyke Brown glazing stain, followed by a coat of semi-gloss lacquer. As is the case with most things, there is a proper viewing distance. The closer you get …

  21. Started by difalkner,

    Started yesterday with some cutoff pieces of Walnut, finished it today, shipping it to NY on Monday. Finished in Nitrocellulose lacquer. When your planer isn't big enough and the CNC is... David

  22. Started by RichardA,

    When ya get old, things happen that as a younger man you'd never expect to happen to you. Mainly because when we're young we know we're gonna live forever. I got old. I had a monster back surgery a year ago and it's made my ability to walk properly kinda crappy. And being on my feet for more than 10 or 20 minutes, causes more back pain than I like to brag about. Anyhow. I got a cane from my insurance company. It helps, but it's to short even fully extended. And all the canes in Walmart are short as well. So I made one. It to turned out to be to short, so it became firewood. I made another from an Apple branch and a chunk of Cherry scrap. That works okay, but I feel…

  23. Started by RichardA,

    As I get older, I find my hands seem to disagree with what I want to do. They shake! Not a lot, but enough to, in some cases be nerve racking, and even at times a tad dangerous to my fingers. I have been using a chunk of scrap plywood with two pieces screwed at 45* to the table to cut splines for picture frames, boxes and any joint that brings end grain to end grain. Shaky hands do not offer a good solution to a quick made jig that by itself is shaky to begin with. No, my shaky hands and the shaky jig don't counter each other and make the movement solid. It exacerbates it, and makes it twice or more worse. You can guess that it was driving me to drink, and scaring the …

  24. Started by difalkner,

    I was fortunate to be given the opportunity to make a retirement gift for a friend who's been with the Sheriff's department for 30 years. One of the ladies in his department saw some of my work and sent some suggestions to see if I could get something ready in time (I had about two weeks so that wasn't a problem). We decided on a US Flag with the thin blue line. She picked it up yesterday and they presented it to him this morning; I understand he was thrilled with it so that text was a good way to start the day for me! The flag is 12" x 22" and cut out of 1/2" BB which achieved the look they liked. David

  25. A friend asked me to engrave some Beech and Red Heart with the 10 Commandments in English and Hebrew. Getting the Hebrew was more difficult than I thought it would be and I hope I got it right. I think the plaque came out nice and Beech is a dream to machine. This is 12" wide by 13" high. David

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.