Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Video and Project Showcase

Project showcase and videos.  Post video journals in the Journal section

Posting Rules

This space is not intended for spam or to drive traffic to your channel/site. If you post a video, please be sure to include a paragraph of text about the video and make sure the video is embedded. The forum usually embeds the video automatically if you drop in the link. 

  1. Started by krtwood,

    This was a challenging one. I think because you normally see segmented bowls done on the lathe where you get the perfect circular form for free this really called for seeking perfection in the form in a way that I don't normally pursue. I got pretty close on the form. Made some stupid mistakes along the way, including dooming the whole thing by failing to thoroughly inspect the stock right at the beginning. But it was really just an experiment so I'm over it. I watched this interview with Mark Lindquist where he talks about how there's ideas about what the right way of doing things are and he doesn't see it that way. He's done stuff like texturi…

      • Like
    • 8 replies
    • 4k views
  2. Started by Lucas Purpleheart,

    This was my 2nd box I've made. Butt joints on oak and purpleheart. Sanded each to 220. Matte water poly on sides and gloss on PH.

      • Like
    • 3 replies
    • 3.2k views
  3. Started by Mark J,

    Here is bowl number 18. It's titled "Embraced"--my wife thought it up, and I thought it was a great name. I used the three sided bowl technique I previously described, then carved away two of the pillars to leave a very open view of the "outside in" surface. I was going for a suggestion of heart shape, but I love the way the two pillars rise up to the bowl. Hence the name. The wood is hard maple and the finish is polyurethane varnish.

      • Like
      • Thanks
    • 8 replies
    • 4.5k views
  4. Started by Chestnut,

    Megan has been requesting fresh herbs in the kitchen for a while. So i decided to make a rack that hangs by the window in our kitchen to put some potted herbs on. Light is important so i researched grow lights and found all the stoner options on pretty much every site out there. Those are a no go, A. I'm not a stoner and the lights don't look cool, B. I'd like something that blends in. So i researched what light plants need and remembered all those you tubers that got lights from American green light. What the heck I'll give them a shot. The joinery was screws that were plugged. I made treys to hold the pots that had some empty space underneath to hid the lights so w…

  5. Started by Bombarde16,

    Gifting it to a friend today but I got a quick snapshot outside while things are offgassing. This is from Anne of all Trades's site and I even had some dark green paint for the sides. Mostly pine but the bottom shelf is poplar. Oh well. My boards were bowed, so I added tusks for the central shelf to keep things straight. Tusks are a little long, might come back later to cut them down or do something pretty with them. Right now, I just needed to get it done and on its way.

      • Like
    • 8 replies
    • 4.3k views
  6. Started by davewyo,

  7. Started by Kenny Huber,

    Thanks for the warm welcomes! Guess I need to try to get on here more often. I finished the bookcase and built an entry way table since I last posted. Currently, I am I. The process of trying to clean out the garage to turn it into a proper shop. Got a new Delta table saw for Christmas and have plans to start building a miter saw station. Here are a couple of pics of the bookcase and table.

    • 2 replies
    • 3.2k views
  8. Started by mtairymd,

    My daughter recently started collecting succulents and Tillandsias (air plants). Honestly, I had never heard of air plants but as the name implies, they grow without the need for soil. They can be purchased at your local nursery or garden center and online. Anyway, she wanted a way to display them. Online, you will find various options for containers with the most common selection being glass terrariums. I wanted to make something a little different. Also, it's an excuse to use my scrap wood. Block 1 - CAD Rendering Block 1 Dimensions Forstner Bit (.75" & 1") for holes Router for chamfers Bl…

      • Haha
      • Thanks
      • Like
    • 15 replies
    • 5.9k views
  9. Started by Bmac,

    This is a fun little table to make, and really pretty straight forward. Made this to go with a future walnut Maloof Rocker, on the list for later this year. Got these plans from Scott Morrison, I've about tapped him out for plans now. The technique to make the legs is simple and versatile. I could see me using this in future designs, whether you do 2 feet or 4 feet (like this project). Here's the desired outcome; Stock selection, I love pulling out a pile of Walnut, all milled by trees I harvested, and starting to make something; Pieces selected for the top, small dominos for board alignment; Circle cut freehand on the bandsaw then used…

  10. Started by Mark J,

    Bowl #17. I have titled it Half Moon. I finished this just before Christmas, but I didn't get around to setting up the photo booth for some pictures until this weekend. My lovely wife complimented it many times while I was making it, so when these had exceeded spousal duty I decided I'd better make it a gift to her for Christmas. I think it came off rather well, too. Similar process to those I've done before, but variation on the shape, it has a lot of intriguing perspectives when I started photographing it. Hard maple with Bartley Gel Varnish. Bowl #18 is on the lathe and I hope to have that done in the next week or two.

  11. Started by oldman_pottering,

    Today I finished a plant stand for my wife The timber I used was from an old hardwood framed shed, that was demolished 4 years ago ( to our knowledge the timber was approx 75 yo) After trying to draw something in SketchUp I headed over to the forums and was lucky enough to have Dave Richards lend a helping hand to my design incompetencies and he actually draw me a plan for the bench. The bench is not exactly as planned but I am happy with the outcome and my wife is overjoyed ( which is a bonus in itself) As the timber was very old and weathered as you can imagine it took me quite awhile to clean it up, remove small splits along the edges etc. My l…

  12. I am relatively new to woodworking and just found this forum. Seems like a great place! I thought I would share the batch of cutting boards that I made for Christmas Gifts for my family members. I ended up making 11 boards all from walnut, cherry and maple. I think they turned out pretty nice, but would love to hear from other more experienced woodworkers on the process I used. Video here: Christmas Cutting Boards In this video I show how to make hardwood edge grain cutting boards from walnut, cherry and hard maple. I made a batch of these in my workshop for Christmas gifts and I think they turned out very nice! I wanted to make someth…

  13. Started by rpike,

    I've been a lurker here for years reading posts and soaking up knowledge, but I rarely post. I recently took on a project that I felt was well above my skill level, and I learned a lot form it. This post is meant primarily to encourage those who feel they don't have the "right tools" or the skills to go ahead and give it a shot anyway. You'll surprise yourself with what you can do. A bit about me, I am by no means a pro. During college I worked as a framer for about 6 months before my fear of heights got the better of me. I then got a job via classified ad (that'll date me) for a finish carpenter. When I called the number on the ad, the guy asked me only a few…

  14. Some of you know, and some don't. My wife was diagnosed with cancer in 2015. She went through all the necessary treatments, radiation, chemotherapy and everything they had to stop the cancer. It worked, all that was left after 2 1/2 years of treatments was scar tissue. Hooray we thought, but hold on a minute. Why wasn't she recovering? She was weak, hardly able to walk, to eat, to have a good life again. It seems that the chemicals that are used to kill off the cancer cells, also do damage to other parts of the body. Those chemicals that saved my wife's life from cancer, destroyed her stem cells. Those are the cells in the bone marrow that produce red blood, white blo…

  15. Started by bleedinblue,

    Nothing you write home about here, but if you make something and dont post pictures, did it really happen? The American flag was for my father, who is a Vietnam veteran. I bought the union, I wanted the perfection of the CNC. I was going to do the typical burned/stained home center pine, but realized I have piles of cherry and curly maple that bumped it up a notch. I didn't use my best maple, but there's still some curl in there. A very quick, easy project. The Ulu knife sets go to my in-laws. Nothing extraordinary here either, except since I have no lathe, I cut the bowls with a router in a jig. Messy, but it went pretty well. I'll attach photos of the j…

  16. Started by difalkner,

    When we opened our Etsy shop a year ago I offered a Superman style trivet and the option to have it customized with the letter of your choice. I had made one with the S for my son because he likes to cook and I thought it would be cool. Turned out the very first order we got was for a customized trivet with a 'C' instead of the S. The finish is straight mineral oil and the notches are to allow air in/out since these are trivets for hot pans. This is the 'C' we did - This is the original - Nobody has asked for one since that first order but all of a sudden this week we've gotten two custom orders. The first one was for a set of 7 trivets with B1-B7. Doi…

  17. Started by Chet,

    I made a couple of jewelry boxes out of sepele for my daughters for Christmas. I haven't made any thing for them since they were kids here at home so I figured it was time. They are simple in design, neither one of our daughters is into fancy or real ornate stuff. I used Brusso stop hinges and they are finished with satin Arm-R-Seal. This is the first project using sepele and I really enjoyed working with it. I have another project after the first of the year and I now think I will be using sepele for that one also. The chatoyance is really something with sepele as you change the angle at which you view it from.

  18. Started by Isaac,

    This project originated as a desire to fill a need in our first floor bathroom. The room has a small stand-up shower and a decorative sink, but has no built in storage space, aside from a medicine cabinet mirror. It serves as our primarily guest/powder room. There is not a lot of space, but I wanted some place to store extra TP and odds and ends. As usual, I decided to try something I'd never really done before, which in this case was some decorative inlay work. I built the cabinet out of cherry and used walnut and maple for the inlay work, to get some contrasting colors. It is not very deep, specifically because I didn't want it to intrude significantly into the sp…

      • Like
    • 13 replies
    • 4.5k views
  19. Started by krtwood,

    There's a new reindeer sheriff in town. I intended to keep the square cross section in the neck, having it twist to the 45 degree angle of the head, but I didn't cut enough of the upper block at the 45 degree angle and the neck didn't align perfectly so I had to settle for a round neck. Maybe next time. A little look at the process below. Basically just make the block over-sized and then cut out the rectangular block that the head is within and then cut the head out of that block as you normally would, with some scrap blocks under it to give clearance for the body. There's only two 45 degree cuts required in establishing that block. Getting the neck…

      • Haha
      • Like
    • 32 replies
    • 20.8k views
  20. Started by difalkner,

    I had a request last week to cut some Enigma cipher gears - two sets of 5 with 12", 6", and 3" gears. I also cut a drill guide for them so they could properly place the dowel axles (or spindles) I provided. One set has an anchor cut into where one spoke would be because the theme for the room is submarines. They're going to paint these and didn't want engraving on the teeth. These will be for an Escape Room. Fun job, actually, so we're going to offer these in our Etsy shop. David

  21. Started by Benham_Design,

    In this project I design and build a bench incorporating Japanese style architecture, as well as in lay some bow ties/butterflies along a crack I carve as a decorative feature. Depending on how you argue the semantics of what joinery is, their are 5 or 6 different types of joinery in this project. Used a dado blade to cut the bridle joints on the tablesaw I tried to find piece of walnut that had grain flowing in the direction of the decorative arch Hollow mortiser left the walls of the mortise rough so I cleaned them up with a chisel Angled tenons to match the taper on the legs. cut with a combination of dado blade and a Japanes…

      • Like
      • Thanks
    • 9 replies
    • 5.8k views
  22. Started by mtairymd,

    This is my take on the classic wooden snake puzzle. Purchased ones generally range in size from 2" cubed down to key chain size. This one is 4.5" cubed. Although time-consuming and somewhat mind numbing, it wasn't very challenging to build. However, you will need to pay attention to the build and assembly instructions. Solution: I didn't know how it was going to turn out so I used low cost poplar (2x2 by 6 feet). Cut down to 1.5" x 1.5" x 1.5" blocks. You will need 27 of them. 11 Straight hole blocks. 2 with counterbores (shown here) 45 Degree holes. Make 16 of these blocks. 45 Chamfer for the sides. …

    • 2 replies
    • 3.8k views
  23. Started by estesbubba,

    Our Pastor asked me if I would be interested in making a small altar for a chapel in a memory care facility. It is made out of rift-sawn red oak, with the top and bookmatched panels quarter-sawn. The finish is American Walnut oil-based stain, followed by super blonde shellac, with two water-based topcoats. It was a nice first project of the woodworking season.

      • Thanks
      • Like
    • 9 replies
    • 4.7k views
  24. Started by Chet,

    This was a simple box that I made for my niece's new baby girl. The inside and outside are Wenge the polka dots are Maple. I used box joints on the corners and the handle on the lid is also made of maple. I kind of got the idea from one of Matt Kenney's boxes in his book 52 boxes in 52 weeks.

  25. Started by difalkner,

    This is something I came up with a while back and have made a few but I thought I'd post a few photos of this one. It's a marriage, wedding, or anniversary sign (plaque?) in Walnut with a Maple cross. This can be hung on a wall or set on the easel I also designed. It's got one coat of Nitrocellulose sanding sealer and one coat of gloss. Enjoy! David

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.