Product Reviews
Read and share firsthand reviews of woodworking tools, accessories, and supplies. Find out how products perform in members’ shops before you buy.
269 topics in this forum
-
Anyone running with a Triton MOF001 router? I desperately looking to replace my current Ryobi fixed base router. After much deliberation I believe I've settled on the Triton 2 1/4 hp plunge router. This will be used as a handheld device and I'll leave my Ryobi in my little router table until I can acquire a proper router table w router in the future. Curious if anyone has positive/negative reviews on the Triton. Thanks for the help
-
-
- 10 replies
- 10k views
-
-
Hi Everyone, I'm new here on the forums. I've stopped in to the IRC channel several times, but have yet to post here. Anyway, for Christmas, my awesome, super-duper wife bought me a new jointer. Now, if you're paying attention, you'll notice the date of this post is BEFORE xmas 2013 by a few days. Well, I received it a coule of days ago and with my wife's permission assembled it early. The reasoning is; I wanted to make sure everything was okay and not damaged in any way in case I had to send something back or was missing parts......at least that's what I told my wife. While that was the truth, I'm also a big kid and couldn't wait to play with my new toy So…
-
-
- 12 replies
- 11.2k views
-
-
Just got this bad boy tonight. Here is a size comparison next to the standard block plane. Very similar size It is a lovely little plane that sits great in hand. As usual the blade comes needing a honing and maybe a little work on the back. I only opened it up late tonight after i put the kids to bed so I haven't gotten to that yet. It was sharp enough to play around with so i gave it a try. Put the blade in, adjusted it, lowered the nicker, put the fence on and went to town. It was super easy to setup. Within 5 minutes of having it out of the box it was on some wood. …
-
-
- 21 replies
- 9.3k views
-
-
It's nice. The only complaint I have is not really a complaint, but I don't know what category to put it in. The iron came in a separate package, and stated on it, and in the instructions that came with the plane that it was sharp to start with. In my book, it wasn't. It would barely shave hair on my arm. I got the O1 iron, so thankfully it was easy to finish sharpening it. The iron looks like it was cut on a shear, and one side is rough with some rust on it. It is nice and flat on both faces. I may or may not get around to cleaning up the sides, but I guess it really doesn't matter. Every detail about how the plane was designed was well thought out. F…
-
-
- 21 replies
- 9.7k views
-
-
This is a review of the Oneida Dust Deputy. I have yet to hear anything bad about this product, and that is the reason for me posting this. This unit is not working well for me at all. There is much more dust going into my vac than there is into the bucket below the dust deputy. Has anyone else had any issues with the dust deputy? Below are pictures of the amount of dust going into my vac. There is about 4" of dust in the vac and not much at all in the bucket under the dust deputy. I will take a picture of the amount of dust in the bucket later.
-
-
- 12 replies
- 11.1k views
- 1 follower
-
-
Here's my review of the Woodriver 4 piece Butt Chisel set, delivered in a wood box.
-
- 2 replies
- 4k views
-
-
It took one use for this thing to be my new favorite tool ever. For $30, it does exactly what it is supposed to and made setting the jointer fence a billion times easier. Holding the square to make sure it stays square while beating the lock with a dead blow is annoying. I always find myself second guessing squareness of stuff. Even more so when there is a variation in the metal or whatever that I'm holding the square against. It was also very intuitive. I didn't read any instructions. I just put it on the jointer table, hit zero then put it on the fence. I did still test the squareness of the test board with a starrett square afterwards and it was good to go.
-
-
- 27 replies
- 11.4k views
-
-
Recently I saw the Bessey Uni-Clamps on sale for a reasonable price so bought a set of 4. I have to say these are great for small glue ups as they follow the now standard parallel clamping format and are classed as light duty. The version I bought is the UK 300/80 which in USA/Canada are the 12" x 3 1/8". Clamping force up to 1‚500 N (330 pounds) Parallel jaw faces with extra-large contact surfaces Clamping of various shapes‚ along the whole length of the rail Universally applicable Light and easy-to-handle No need for tools for switching between clamping and spreading The bar is just less than 1/4" thick x 3/4" wide and about 17" in length made of steel with what look…
-
-
- 5 replies
- 6.1k views
-
-
I was a tester for the Bessey toggle clamps, and I did a video review of it. This is my first video, I know the audio is crap and the screen is shaking, not center etc. (I don't have a tripod either) But there we go http://www.youtube.com/watch?v=AzeKmTV4k_E
-
-
- 2 replies
- 3.5k views
-
-
After watching Marc's podcast, I decided to buy one of the Dust Deputy shop vac kits made by Oneida. I bought it at Busy Bee Tools for 79.99. The kit comes with two 5 gallon pails, a length of 2.5" flex hose, a 90 degree elbow, 3 casters, the cyclone itself, a retention ring, a hose clamp, a styrofoam block for shop vac "Piggy backing", and a manual. I decided not screw the unit into my vac, so I cut a plywood base from scrap and put some casters in it that I had laying around the shop. Then I bolted one pail to the plywood, removed the casters from my shopvac, and attached the shop vac to the base too. I made the appropriate hose connections, added ths second pail…
-
-
- 23 replies
- 10.7k views
- 1 follower
-
-
I came across a review of this drill guide and looked up the inventors website. Then days later I saw it offered at http://www.harryepstein.com When I was shopping for a 24" blade for my combination square, so I added the drill guide to the order and saved on shipping. Received it and played with it a little the tossed it in the drawer under the drill press. I stripped out the threads on my sliding crosscut table's lock knob and need to drill it out so I could tap it for the next size . I centered up the tap drill and jig on the hole and clamped the jig in place, then drilled a perfectly straight hole. Found the hole in the jig that fit my tap and used the jig to kee…
-
- 1 reply
- 3.6k views
-
-
After discovering how horribly not-square my 12" combo square from the home center was, I went in search of a new one. Of course, having the love I do for high quality hand tools, I went immediately to Starrett. Love I have, budget I don't. So, I needed a square that was high quality, but didn't break the bank. I also decided that I would start with a 4", because I often found myself needing a smaller square. And I figured in a pinch, I could use the 4" to make sure the 12" was square if I needed it. I happened to find a review of combo squares in the December, 2012 Fine Woodworking. They named PEC best value. They also noted that PEC appeared to make the off…
-
-
- 34 replies
- 21.4k views
-
-
I bought a Musclechuck router collet at the Atlanta Woodworking Show. I saw Rollie Johnson's video review and was intrigued. I spoke to him at the show and he reinforced how well made it is and how well it works. I bought one for my PC 7618 which is installed in my Woodpecker's router table. I tell you that only so that you know the conditions in which I use it. I've been using it for about 4 months 1. It is very well made. Great machining. Easy to install. Just replace your standard collet with the Musclechuck and tighten it (not over tight) down. Rollie mentioned the possibility of wobble and said just reinstall and it should be fine. I had no problems at all. 2. I…
-
- 4 replies
- 4.7k views
-
-
This is a simple but well made idea. In the past I have strapped a couple of lengths of thin scrap together to make what is essentially a variable length comparator stick. I would normally use a little blue tape to hold the two sticks together. This is cheap and works really well but Veritas came up with this simple idea a few years ago. Each head is a circular billet of aluminium with a rectangular hole machined in the side. This part has been black anodised. There is a turned brass knob in the top of one of the clamps. Both heads are secured to their respective timbers with brass machine screws. Like most items from Lee Valley Veritas the item is very well en…
-
- 8 replies
- 6.2k views
- 1 follower
-
-
19.99 and AVOID. There's no specific brand name on it, but the SKU says 'Turners Tape'. It's not the usual paper backing; rather a very thin vinyl. As a result, you can't peel the backing off..it just stretches and pulls up the tape with it. It's the same very strong tape otherwise. If I spent 10 minutes template routing, I spent 30 minutes trying to peel the backing off the tape.
-
-
- 16 replies
- 6.1k views
-
-
I'm pretty sure this has been reviewed before, but I just got one to try. I like it a lot. The texture by itself is the best surface I've ever used on a jointer push block. The texture works so well, that it wouldn't matter to me if the drop down pushers weren't on it or not, but I like them too just knowing they're back there. I'm not especially crazy about the square-ish shaped handles, but it doesn't really bother me that much. It's just different than what I'm used to. I'm ordering the second one, and will be tossing my old style ones. If you use a jointer to face boards, or your fingers to push a board being resawn on a bandsaw, get a pair.
-
- 4 replies
- 3.3k views
-
-
I am building a bathroom full of cabinets and had to install 18 drawers. I bought these two installation jigs from Rockler and they have been very useful. I have installed drawer slides a few different ways on previous projects, and this jig was the fastest way I've found. A lot of these "gadgets" I've tried have been a bust, but this gets a thumbs up http://www.rockler.com/rockler-universal-drawer-slide-jig http://www.rockler.com/rockler-drawer-installation-brackets
-
- 7 replies
- 9k views
-
-
This thing is actually pretty daggone good. Especially with the Amazon Dewalt $25 discount. I ordered it a few days ago because I have some old wood I need to run dadoes in that I didn't want to risk Forrest teeth in. I did a test cut on some ordinary 3/4" BIrch plywood first. I'm sure having a well tuned table saw makes a difference, but there was zero tearout on the edges, and the bottom of the cut was very useable. While the bottom might not have been as clean as the Forrest, it is certainly useable for almost anything anyone would need. If you don't have a dado set, and have been waiting to get one, this thing at $89 at the sale price through the 22nd,…
-
-
- 7 replies
- 3.8k views
-
-
Not sure if the Iron Horse is truly considered a "woodworking tool", but think it should be as it's involved with the first step in my woodworking projects - retrieving logs from my woods. My unit is the low-end model, with 5 hp engine and no power winch. Although 5 hp sounds low, the gearing takes care of the torque requirement and although definitely not fast, it's proved adequate in retrieving good-sized logs and hauling up considerable grades. In the roughly 20 years I've had the unit, I've had to replace one five dollar bushing in the clutch assembly. The clutch assembly is a common made in the USA clutch, parts for which are readily available without having the go t…
-
- 7 replies
- 8.9k views
-
-
As some as you might know, last week I received Milwaukee's OneKey impact/hammer drill set. After months of waiting for its release and the amount I spent on it, I was disappointed with the fit of the battery on one of the drills. I guess I was expecting the same quality along the lines of BCTW or Lie-Nielson. After scouring the web for similar issues and reading the comments on it, it seems it's not that uncommon or an issue for concern. I checked a few of the drills at work, most if not all had similar issues. So I decided to give it another shot. So found a HD with the set in stock and made my way up there. I took the only one left on the shelf. While waiting in line t…
-
- 3 replies
- 4.8k views
-
-
Finally, after months of waiting, my hammer drill/impact combo was ready to be picked up at the store. I made my way over there after work, got it home and started going over it. She was beauty for sure. I started charging the batteries and registering it to my phone. Sure $500+ is a lot for a couple of drills, but I NEED them... I got the first battery charged and connected to the hammer drill. Everything was going so well. On to the impact, I get the battery charged up and connect it. That's when I noticed the battery fits a little loose. Try the other battery, same thing. Disappointment washes over me. I try not too let it bother me but it's not happening. I can see …
-
- 12 replies
- 6.1k views
-
-
This is what broke my new years resolution to not buy any new tools in 2016! I also bought some more tools so PAH to new years resolutions. Having been an owner and user of the standard Veritas MKII (Mark 2) honing guide for a number of years I was aware of a few of its shortcomings. Not being able to hold any of my mortise chisels Poor holding of narrow blade chisels. With the addition of the Narrow Blade attachment these limitations are no longer an issue. I decided to buy a complete 3 piece assembly rather than the head only as I often hone wide plane blades and wanted to dedicate my original MKII to the task. I ordered my new honing guide f…
-
-
- 11 replies
- 10.6k views
- 1 follower
-
-
I bought the fence setup from VSC Tools, and was very impressed with the product. I replaced my Biesemeyer fence on a Delta Unisaw A few notes: 1) the fit and finish are very nice 2) installation was very easy (15 minutes to assemble, install and calibrate) 4) Works great and it is nice to be able to use attachments. It gives me cleaner cuts than my old fence which had a variation of around +/-1/32" in flatness over the length of the fence
-
-
- 7 replies
- 13.5k views
-
-
I received a Hitachi KM12VC Router kit as an early Christmas gift, so I caould complete some other Christmas gifts. Several of you expressed an interest, so I thought I'd share my thoughts on this kit, now that I've used it a bit. This kit retails for $179 US dollars. [ What's in the box ] This kit includes a 2.25 horsepower motor, with speeds variable between 8000 and 24000 rpm. There is also a fixed base, a plunge base, an extra baseplate, collets for 1/4" and 1/2" shank bits, a 7-piece guide bushing set, a centering tool, collet wrenches, screws for attaching accessories, and user guide. The kit comes in a typical blow-molded plastic case, with niches for…
-
-
- 9 replies
- 5.2k views
-
-
When I was ready to finish the two tables for my church, I wanted to use a poly finish for durability. So after listening to all 290+ episodes of WoodTalk and researching Fine Woodworking magazine's finish test, I went to my local Woodcraft store and asked for some General Finishes Armor-Seal, only to be told: "Sorry, we can't sell that in California because of the air pollution regulations". Rats. OK, let's try the second place finish: Minwax Wipe-On Poly. I went to Home Depot near my house and searched high and low for a can of it. Then I asked the paint department head if he had any in stock, only to hear a familiar refrain: "Sorry, we can't sell that in California bec…
-
-
- 23 replies
- 8.8k views
-
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·