Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Product Reviews

Read and share firsthand reviews of woodworking tools, accessories, and supplies. Find out how products perform in members’ shops before you buy.

  1. Started by Robby W,

    I thought I would add this review of a blade I bought just to see what it was about and very happy I did. I have owned a couple of Woodworker II 40 tooth blades for many years - bought the first one in the 1980's when Wally Kunkel was on the show circuit. I had two so one could be out for sharpening without me being down. I also own several Freud blades. I started out with a Freud 50 tooth combo blade 'way back when, but wasn't happy with it for crosscuts - it left a ragged cut, especially on the exit and bottom of the cut, even though I routinely use a zero clearance insert. The Woodworker II's are a good general purpose blade and when sharp and clean, deliver excel…

      • Like
    • 5 replies
    • 7.6k views
  2. Started by Lee Bussy,

    I purchased one of those Trend honing kits for my chisels and planes at WWIA. I finally busted it out to do some damage on a new set of Narex chisels. I was having a tough time keeping a square edge, I think the guide might be torqued a little. After I finished the 1" I went to loosen the screw and the head stripped right off. I was pretty discouraged but I kept going. I used vice grips and got them all sharpened enough to shave my am hairs but they are not perfectly 90 degrees, maybe a fraction of a degree off judging by my machinist's square. I suspect this is a bad honing guide on top of the screw head coming off. This was all yesterday so when taking a break fro…

    • 0 replies
    • 3.8k views
  3. Started by Trip,

    Like many, I’ve got FWW’s DVD Archive. For those who don't know, it’s every issue of FWW in PDF format from 1975 forward... The issues are indexed and searchable... BTW: you can install it on your hard drive for faster access... Also like many, I use the archive as a searchable database of techniques/projects... Say I’m making a Federal Period piece with hand-hammered drawer facings, cock beading and inlay (typical for the period). I’ll search the DVD archive for “Federal Period, hand-hammered veneer, cock beading” and find articles from 1979 and 2006 – perfect... I've had the archive for years and this is how I've traditionally used it... I'm sure there have been reviews…

  4. Started by Cliff,

    I picked up a router table at an estate auction a few days back. Had an Incra fence on a woodpecker router table. I had no idea what the Incra stuff was, just that it was a deal. Turned out it was an Incra Jig Ultra from the mid-90's. But it was missing some of the stuff because the family had no idea what went with what. I was missing templates and guides. I contacted Mark over at Incra and starting pumping him full of my noob questions about what I was missing. He asked for a pic. Then he gave me the rundown on what I was missing, url's to get it, the parts page for the unit I have and other awesome advice. Even set me straight on some set up stuff. Considering they h…

      • Like
    • 11 replies
    • 3.8k views
  5. Started by Tom Cancelleri,

    So in my journey to find hinges that aren't stamped garbage, and not wanting to sell organs to buy Brusso hinges for 7 boxes I'm gonna be making, I happened across Horton Brasses clock/box hinges. They are made of cast brass and then finished with various types of finishes (antique, dark antique, polished brass, satin brass, satin nickel, polished nickel) I picked up 8 pairs and received them today. Shipping is reasonably priced at $6.00 priority mail (it's not amazon prime, but I'll live) I also received a little note in the package that said "I am the one who packed your order, while I try my best not to make any errors in packing, mistakes do happen. If there is anythi…

      • Like
    • 8 replies
    • 6.3k views
  6. Started by Tom Cancelleri,

    Jet has recently released a new woodworking drill press JDP-17 716300 The release was back in October 2014. I had been looking around for a new drill press to replace my Shop Fox 1670 Radial Drill press. However all drill presses that I saw were the same. They were all built the same and there hasn't been too much change since the 80s. I wanted a light integrated with it and a laser was a nice addition, though not necessary. The JDP-17 features 5" quill travel, ability to drill the center of up to a 17" piece, 3/4 HP motor and 16 speeds. Packing: Packing is nice and secure, all the pieces except the head are set inside of plastic bags with an anti-rust agent and a…

      • Like
    • 16 replies
    • 14.9k views
  7. I am a fan of Trend products as all of their professional products, routers, safety equipment, cutters etc that I own are top quality and built to last. However the T4 router is garbage here's why: I needed a small 1/4" plunge router and the Trend T4 seemed to fit the bill and at the current Amazon price point also seemed to be a bargain. I ordered one. The router itself is a 850 watt 1.1 HP machine with a plunge base which has a 30mm (1" 1/4) plunge. It comes with a pressed steel adjustable fence, a few tools, 3 sizes of collet (1/4", 6mm and 8mm), a transparent plastic dust shroud, instruction manual all enclosed in a blow moulded carrying case. The dreaded Trend T4 Th…

  8. Started by Mzdadoc,

    Well after a lot of swearing (under my breathe of coarse) I finished painting the garage white for better lighting. I'm glad I did but it isn't any fun! Here is the before first and then the final results. Here are the pics after the paint job, Big Ass Lights, and replacing the existing bulbs with 100W LED bulbs. The end result explains it all! For me worth every penny. Customer service is excellent. Quality is excellent. Ease of installation is excellent. Painting?! Well that just plain sucked! Just sayin!!!!

      • Like
    • 29 replies
    • 10.9k views
  9. Started by wouldwurker,

    $40 and will be getting returned. Won't go into the specifics of the design because at the end of the day it did a lousy job keeping dust out of my lungs, throat, and sinuses. Night and day compared to my 3M mask. Avoid it.

    • 0 replies
    • 3.1k views
  10. Started by wouldwurker,

    These are awesome. If you've used standard toggle bolts, you know the frustrating thing is that once the bolt comes out, the butterfly anchor falls behind the drywall. Plus, they're kind of a pain. Toggler makes a toggle bolt that installs the butterfly anchor first, locking it into place. The hinged anchor is essentially attached to two zip ties. While holding the zip ties, you insert the anchor through the hole in the wall, then pull the zips towards you to expand the hinge behind the drywall, bringing it flush up against the inside of the wall. Then just push the zip 'lock' up against the wall while you pull on the zips ties. You snap the zip ties off and th…

      • Like
    • 4 replies
    • 8.3k views
  11. Started by Anthony Molyneaux,

    Hey everyone, this is my first blog ever. My name is Anthony, and I'm from Virginia Beach. I currently own a basic pattern bit that gets the job done, but I'm looking to get a cleaner/best cut. I came across the Big Daddy pattern bit and that looks great. But I did not see very many reviews for it and it's a bit pricey. Is it actually worth the money? Is it the best on the market when it comes to patter bits? I appreciate any help! Here is a link to the bit... http://shop.wnwoodworkingschool.com/Big-Daddy-Pattern-Bit-Big-Daddy-Pattern-Bit.htm -Anthony

    • 5 replies
    • 3.7k views
  12. Started by rodger.,

    After my DeWalt outer combo died, I needed a replacement in a timely fashion. I went though the usual research steps, did my homework, and asked the community for opinions. I narrowed my choices down to the Festool OF1400, The Bosch 1617, and the MRc23. In the end I got the newer bosch on sale for the same price as the 1617, so I went for it. I found the Festool very nice, but I really wanted 2 bases. Unboxing This kit comes with the 2.3 HP motor, a plunge base, a fixed base, two wrenches, two collets, a T-wrench for above the table adjustments, some mounting screws, manual, and the blow molded case. After I unboxed it and starting looking at it, i r…

    • 3 replies
    • 9.4k views
  13. Started by Mzdadoc,

    I'm going to do my best and give a review of my new lights that just arrived. I've installed them where I want them on my ceiling and now I just have to wait for my electrician. First off they come just like this sent together but in individual boxes with their logo so make sure they get dropped somewhere safe. They come very well packaged! I truly believe you could drive over these or drop them from a roof. These are extremely well made. They even have sturdy slide out dust covers that slide out one side and fit very well. Every where I looked at them they were incredibly engineered almost over engineered. Usually you find somewhere that they skimp on but …

      • Like
    • 18 replies
    • 5k views
  14. After spending many hours reading Don Williams new book on the Studley Tool Cabinet and Workbench, I decided to film a page-through of the book. I can't imagine any woodworker not loving this book. Grab yourself a copy if you haven't already.

    • 13 replies
    • 3.9k views
  15. Started by TerryMcK,

    I was pleased to see that Rutlands had become the official UK distributor for the Oneida Dust Deputy. This is a cyclone that you can retrofit to any shop vacuum. It must be stressed that this is for a shop vac and not a larger 4" or greater dust or chip extractor. The latter normally run at a lower vacuum but higher flow rate than a shop vac. They are designed to extract large volumes of chips. A shop vac on the other hand is designed for lower flow rates but higher vacuums and is ideal for smaller particles such as fine dust. The problem I have found over the years is that a shop vac filter clogs decreasing the efficiency of the unit to such an extent that sometimes it b…

  16. Started by bob493,

    In the hobbyist realm of wood working, I find it difficult to believe the average joe can really crank down and learn the intricate art of chisel sharpening the mastery required of a seasoned carpenter/luthier/furniture maker. For those that can, congratulations. I am not among those talented folks. So with that, I am coming from this as a guy who would say he was "ok" sharpening chisels. Initial Impressions -> Upon receipt, I was quite pleased with the weight. It's feels really solid, without being cumbersome. The adjustment knob works smoothly, and clamps with a reassuring amount of force. The lettering for the angling is very legible, albeit unless you pla…

      • Like
    • 12 replies
    • 13.5k views
  17. Started by jotaylor,

    Hi! I have been using sketchup make for about a year and I haven't pretty good with it, but am having issues with it and my mac (common from what I understand). I don't have a problem continuing to use it if the problems stop, but what I am really looking for is a program where I can make the components and have it saved so I don't have to create them every design that I start (not sure if pro offers that or not) and even more importantly I really want a cut list to give to the builder to make it easier for him to rock and roll once the customer approves the design. I was seeing there are plug ins for SU make that you can get to do cut lists but they all require t…

    • 2 replies
    • 3.6k views
  18. Started by panofish,

    Here is my review of the new Rikon Mortiser with XY table. http://youtu.be/K3ta3OTK5Wg Let me know your thoughts. Alan Lilly

  19. Started by davewyo,

    I am very favorably impressed with this Lee Valley work light: http:// After using it for a couple of weeks I can find no drawbacks. It is light weight yet powerful and versatile. It can be used in a dog hole with the optional attachment, or it can be stuck on a metal surface with either of the two powerful magnets. I was surprised to see a Lee Valley product produced in China, but it is very well made regardless of its country of origin. I wondered if the batteries would last long, especially in a cold work shop, but it seems to have adequate life expectancy with the 3 AA batteries that power it. The brightness of the LED is plenty strong and it can be focused for…

  20. Hey guys, am searching sketchup mobile viewer 1 app for android mobile phones. I was on google play store, but i found onlysketchup mobile viewer 1.3 for android tablets.know someone on which Website can i find sketchup mobile viewer app 1.0 for android mobile phones. Thanks

    • 2 replies
    • 4.6k views
  21. Accessing the Start/Stop buttons on my dust collector in my garage is a bit of a challenge that requires opening my garage door. So if I'm only doing a couple of cuts, I've developed a bad habit of not firing up the dust collector, which is bad for the lungs, makes a mess around the garage, and the inside of my saw... I started out by ordering the Jet version of this dust collector remote from a seller on Ebay - I have a jet DC, so should have a matching remote, right? Well, even though it was listed as New, it showed up with a broken case, so after a 3 week return process, which ended with the seller not having any other stock, I started looking again for a remote…

    • 3 replies
    • 6.3k views
  22. Started by rodger.,

    Just received this today via Canada post, though I ordered it before Christmas. It was back ordered for a while. This book was 22.00 CDN on chaptersindigo.ca. The sticker price is 31.95. When I got the book from th mailbox I poured a cup of coffee with the intention to just "pre-read" or flip though it. 2 hours later I am writing this review. This book is incredible and worth every nickle. The author goes through excruciating detail on some topics that are common areas of work for woodworkers (differences in finishes, best application methods, common problems and fixes). Lots of great photos and clearly defined ideas and methods. Should have bought this book…

      • Like
    • 8 replies
    • 5.2k views
  23. Started by AstroDave,

    Not a review per se but though it might be worth sharing... http://imperialblades.net/quickdraw.html

    • 4 replies
    • 4.6k views
  24. Started by wdwerker,

    i just got an email that they are making another batch of this " one time tool" I have had mine now for a year and it is awesome. Great for checking panel squareness . Also very useful as a layout tool. When you think of the cost of a pile of panels for a project only to find out that each part is a little out of square the price seems more reasonable. I checked 6 steel framing squares against it and only one was accurate.

      • Like
    • 19 replies
    • 8.8k views
  25. Started by G S Haydon,

    As most of you have seen in the main I’m a user of vintage planes although a few new ones have also passed through my hands. As much as I enjoy the planes I have if presented with the opportunity to try and review something new I’ll gladly share my thoughts. A cabinet maker in the UK called Peter Sefton offered the WoodRiver plane around for anyone to try via a UK woodworking forum I post in. Once you've had a go you send it to the next person. I'm kinda surprised I have not seen more of this type of thing (or perhaps I've missed it) on other forums. Just to be clear I don't get paid to do this, in fact it costs me money as I have to post the plane but as woodworking sho…

      • Like
    • 27 replies
    • 17.2k views

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.