Project Showcase
Show off your finished woodworking projects and share videos of your work. Browse member-built furniture, cabinets, and other shop projects for ideas.
This space is not intended for spam or to drive traffic to your channel/site. If you post a video, please be sure to include a paragraph of text about the video and make sure the video is embedded. The forum usually embeds the video automatically if you drop in the link.
303 topics in this forum
-
A friend of mine requested I make a display case for his father’s flag, he had passed away a couple of years ago, below is a display case containing items he wanted to display as well, the bottom bar with his name was finished before assembly, taped, laser engraved then painted with gold paint, they are screwed together and meant to hang on the wall, thanks for looking
-
-
- 9 replies
- 2.7k views
- 1 follower
-
-
But woodworking none the less. Forty plus years ago the first thing we did to the house after moving in was build a pergola on the back of the house to create some shade. It was a project that my Dad and I did over a couple of weekends. But the time had come to tear the old beast down before it fell down and build a new one. It is all rough Con-Hart Redwood, 6" X 6" posts, 2" X 6" joist and 2" X 2" staves on top. Now I just have to get all the patio furniture moved back.
-
-
- 8 replies
- 3.8k views
-
-
Granddaughter needed a plant stand so…, 1 1/4” thick white oak, M&T pinned with walnut dowels and half lap joint, the top has a 45 degree bevel on the bottom that meets the top of the curved legs, overall 20” high and 12” diameter, finish is satin ARS, thanks for looking folks
-
-
- 10 replies
- 4.7k views
- 1 follower
-
-
Customer asked for a drop box for inside their business so people could drop off checks and correspondence thru a slot in the top and it had to lock so I came up with this, cherry with some walnut, didn’t want you folks to think I was sitting down on my brain and not in the shop, thanks for looking
-
-
- 10 replies
- 5.4k views
- 1 follower
-
-
I made an attachment for my Starrett combination square heads and my LN side rabbet planes, here's a short video: For those of you who haven't seen my tool chest build, here's a link:
-
-
- 22 replies
- 7.8k views
-
-
I've talked about this several times and I'm finally back to building #2! When I built my first guitar I didn't have the CNC, actually built the CNC while I was finishing that guitar so the only job I did on the CNC for that guitar was a little bit of the bridge. I began build #2 while I was building #1 but got so busy with high-end custom woodworking for other folks that I set #2 aside; I didn't realize it was going to be for 5+ years. Now that I have the CNC I would like to use it for a few more tasks in the building of #2 so the first thing I did was to take photos of the body rim and draw that as closely as possible in my CAD program. The short video below is …
-
-
- 39 replies
- 9.6k views
- 1 follower
-
-
A long time ago i made a wooden squatty potty for my wife. Ever since then my MIL has been harassing me to build one for her. Well this Christmas Santa is going to deliver one to her. I made a pair as a good friend of hers wanted one also. If you are unfamiliar with the concept please do a google search. The design was intended to be simple for quick construction as well as to be able to blend in to more home aesthetics than something more complicated. I used some sort of Mahogany species for this my guess is it's African mahogany but i have no idea. I'm not a huge fan of the Mahogany umbrella species for what ever reason so this is a great way to rid myself of stock I've…
-
-
- 3 replies
- 4.5k views
- 1 follower
-
-
one of my works is a folding chair material - birch plywood 12mm (two layers) cutting on a CNC machine assembly with glue and screws
-
-
- 5 replies
- 4.5k views
-
-
This all started from me noticing we had a ton of extra space in a cabinet that already had 2 existing pullouts. Next I told me wife if we added some pullouts to this other cabinet with a center stile and shelves we could actually access it. Being the wonderful husband I am, only 5-6 months later they're done. I matched the design to the existing pullouts and upgrading all of the slides from 3/4 extension euro slides to full extension soft close slides. Upgrading the existing slides and new ones meant I spent $438 to avoid buying premade ones at $400...
-
-
- 2 replies
- 3.1k views
-
-
Inspired by Mark's video on this from several years ago now, made this Maui hook for my 5 yo. I scaled it down a bit and used strips of leftover 1x fir that I had. As you'd expect, I sheared off the glue joints in a couple spots more than once during the initial cutting, so I drove dowels through in a few areas to strengthen. Not at all the best or cleanest way to approach this, but I wanted to use up the scraps and don't mind the patched up look. Seems to be holding up for now. I did all the shaping with a benchtop belt sander, a ROS with 60 grit, and some rasps. It took a bit of effort but was not at all that bad to do without a grinder/carving disk. This was …
-
-
- 7 replies
- 3.6k views
-
-
Finished up the first frame this morning and hung it. Maple frame with maple splines. Bought the wood 2 years ago now expecting it would be done a long time ago. The picture makes the gap in the top right miter look much bigger than it is in real life. It got misaligned with the glue up. Second one is done but waiting for the artwork. It’s a Christmas gift so I may have set a record for being on time. Will post pictures later.
-
-
- 2 replies
- 3.1k views
-
-
One of the box elders at the endge of my property was leaning badly about a year ago, and the stress on the trunk caused it to buckle, creating an open split. Then the weight of the wet snow on the trunk widened the split considerably. It seemed to me that there should be some way to take advantage of this unusual split, then got to thinking it might be two dragons dueling, if only they had teeth. I'd been sawing some of the downed box elders to get them into pieces that could be handled and fed into the big chipper, so I cut one section into 5/4 thick boards and used those for teeth.
-
- 6 replies
- 3.5k views
- 1 follower
-
-
Any reviews of Laguna SuperMax drum sander
-
-
- 5 replies
- 3.2k views
- 1 follower
-
-
This is a project I have been thinking about doing for a long time. I want it build a folding outfeed table for my table saw. My design was inspired by the folding shelf brackets i used on my wife's sewing cabinet builds I did. I was able to source some 20, 440lb. shelf brackets for the build. then I used Sketch-op to design a mounting system the used riv-nuts in the saw's upright tubes. Over the weekend I built the mounting bracket and go it installed on the saw. I mocked up my top and it is less than 1/32" below the saw surface tan parallel. This week I will make the table top.
-
-
- 13 replies
- 14.2k views
-
-
Here's my latest project, finally complete. Design is my own, but is similar in format to many commercially available cabinets. Construction is 3/4" flat cut white oak plywood. Trim and corner treatments are also white oak. To make those plywood corner joints more robust, I glued in a 5mm square piece of solid oak & then chamfered the corner. For the most part it blends in fairly well with the plywood. The detail on the left hand door is a goof that I turned into a happy feature. Somehow, I cut the door panel too narrow and didn't have enough plywood left to cut a new one. So I cut and carved the maple piece and glued it be…
-
-
- 17 replies
- 4.4k views
- 1 follower
-
-
I saw the plans for this table in “Queen Anne Furniture “ and I thought that it would be a challenging build. The full length knee blocks, the flush fitted apron-leg post joints and the petite legs were unique to me. I found out that the most challenging part was matching the grooves for the bead molding in the aprons with the leg posts. I laminated the legs because I was concerned about how thin they were and I assumed that laminating them would improve the strength. I would be interested to hear if anybody else agrees with this decision?
-
-
- 8 replies
- 3.1k views
-
-
My most recent project was a kitchen tower to allow Hazel to get up to counter height in the kitchen. I used the wood whisperer plans to make this. While they are not quite guild level the plans do an excellent job to make a successful project. I made the project out of butternut. I've been wanting to work with this wood for a while now and recently had the fortune of purchasing some off craig's list for a reasonable price. It was requested by Megan to construct the tower from a ligher weight to make moving it easier. Butternut is a great choice as it's a very light weight wood a lot of softwood species are heavier. The downside is the wood dents very easily but that…
-
-
- 8 replies
- 3.7k views
- 2 followers
-
-
One of my windows was looking a bit plain and needed a pelmet over the curtains ... I had some spare cherry laying around the garage so ... The whole project is basically just a bit of moulding forming three sides of a box, with a plywood top to hold it all rigid. I didn't have any boards 9ft long, so it had to be made in two parts and joined with something decorative in the middle, a little step at the corners to keep it interesting, and a couple of small turnings to add a flourish. The moulding is a composite of five pieces each side ... so ten sticks need to be milled for a bit of a workout. Then the fun starts ... sticking the moulding profi…
-
-
- 12 replies
- 3.7k views
-
-
-
-
- 11 replies
- 4.6k views
-
-
I saw a fun climbing thing online that was made out of wood. I didn't think much of it until hazel started climbing on literally everything. With the main set of dining chairs finished I needed a pallet cleanser. I've had some boxelder and plywood scraps sitting in my shop too long and in the way as well as the dowels for the rungs. The boxelder I'm using came from a tree in my backyard, it was leaning over the neighbor's yard, so i'm surprised that the boards are very well behaved. I started by figuring out the length of board I'd need, using math with the dowel thickness and rung spacing. The rung spacing is to be 3.5" with 1" dowels. That puts the dowels at …
-
-
- 8 replies
- 3.5k views
- 1 follower
-
-
I’ve been wanting to build a highboy for a while; however, I just didn’t think that I had the skills. So I decided to attempt a build and stop as soon as I screwed it up. As usual, I did a lot of preparation before starting, including watching David Boeff. Although I made a lot of mistakes, it turned out better than I thought. I need to get better at grain-matching the knee blocks for sure. I still have to apply the shellac finish and then the escutcheons . I didn’t want to photo it with the finish because I don’t like the look of shellac on cherry when it’s first applied.
-
- 12 replies
- 4.6k views
-
-
Finally finished my workbench today. Time to start filling up the drawers...lol
-
-
- 7 replies
- 3.8k views
-
-
It's not fine joinery, but it is a kind of woodwork, so I thought I'd share with my online woodwork support group ... It's a plywood boatbuilding technique called "stitch and glue" ... needless to say it involves a lot of glue, I used over a gallon of epoxy on this! It started out by cutting pieces from plans out of 1/4" marine ply ... in total I used a bit less than 3 sheets. There is only one frame piece in this boat, and it was made by laminating four pieces of ply together, reinforces at the coners with another two layers ... glued up with epoxy The frame gets epoxied onto the side pieces (secured with temporary screws) and then the sides o…
-
-
- 11 replies
- 5.3k views
-
-
Customer wanted a humidor in cherry, Spanish cedar lined with a removable tray, Veritas stop hinges, 3 coats of ARS satin, thanks for looking, on to the next thing
-
-
- 13 replies
- 4.2k views
- 1 follower
-
-
All Right: Honduran mahogany, Polyx-Oil. Primarily turned with some bandsaw work. The design is composed of a series of right angles.
-
-
- 29 replies
- 7.4k views
- 1 follower
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,010 Total Members
- 3,644 Most Online
-
Lolli4 Newest Member ·