The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
https://washingtondc.craigslist.org/nva/tls/d/herndon-exotic-hardwood-luthier/6872284527.html
-
-
- 5 replies
- 2.3k views
-
-
I have the opportunity to buy some pretty cheap wood - oak, maple etc. from a backyard sawyer. He air dries some of his lumber and kiln (I'm guessing solar kiln) dries the rest. The air dried is considerably cheaper ($1.25 CAD bft) than the kiln dried ($2 CAD bft). All things being equal (ie they are both below 10% moisture): which is better? I had heard that air dried is better because the drying process puts less stress on the internal structures of the wood and so is more stable, but obviously commercial organisations don't want to wait that long to be able to sell their product so they kiln dry instead. Is this true? Should I just stump up the cash…
-
-
- 10 replies
- 8.5k views
-
-
I'll let the pictures do the talking, these are panels for doors in a cabinet I'm making, one coat of osmo polyx;
-
-
- 15 replies
- 4.1k views
-
-
what type of wood and brand stain would you recommend for cabinets and stain? I have purchased both maple and birch plywood from home depot and the results are all over the place when I stain it. I used a miniwax pre-conditioner which helped with the blotchiness, but with or without the conditioner it doesn't take the color of the stain well. the color stain i'm trying is a weathered grey. i've tried sherwin williams stain (which they discontinued), and now i'm trying minwax. I'm not an expert at this, but would like to get close to a kitchen cabinet grade color and finish. thanks Gd
-
- 5 replies
- 2.4k views
-
-
I read this description on another site, it's written by Dr Gene Wengert. It's a great concise description of the powder post beetle we should worry about: "As a review, the lyctid powderpost beetle is the only insect that gets into kiln dried or under 15% MC hardwoods. This insect does not fly around long distances, so you need a source of infection...usually other nearby infected wood or bamboo. A lot of foreign hardwood is infected.So, it will rarely, if ever, be found in air-dried wood (too wet), so it is not necessary to sterilize wood in the kiln as the MC was too high when the lumber went into the kiln and there is no source of infection in the kiln. Any ai…
-
- 0 replies
- 2.5k views
-
-
I am building an entry seat for my apartment out of solid cherry. The basic design is attached. I have come to a difficult point however, because I've realised the seat (not shown) might end up as one solid panel, which will have some wood movement issues. As it expands, it runs the risk of blowing out the mortise and tenons at the front of the piece. How can I solve this issue? I don't want to buy a sheet of cherry plywood - that'll double the cost of the project and frankly I don't have the money for that. Do I make a frame and panel, which will allow the wood to move? Do I put a mortise into the legs, to allow the wood to move into those mortises? If so,…
-
-
- 10 replies
- 3.4k views
-
-
I have been woodworking for about 15 years and I work part time in a Rockler store. I've got a question that no one has ever been able to answer to my satisfaction, but I'm guessing that the wise members of this forum can answer it. Here goes. I ONLY ever see white oak for sale that's 1/4 sawn. Does anyone know why this might be? I live in Minnesota so there's not exactly a shortage of oak trees in this region. And at work at Rockler, and in the 3-4 local lumber yards I but from, I can't remember seeing plain sawn white oak, even once. It seems to ALWAYS be 1/4 sawn. I guess it could be that it is out there and I just haven't noticed it (it's not…
-
-
- 10 replies
- 3.2k views
-
-
This is the stump/burl from a walnut I dropped a few years ago.3 main trees came from it. Finally got the machines in to help get it out. Took a lot of work to get it here, and will be a lot more work to process now. The very center was a bit rotted out so we are chain saw chunking as many big blocks as we can, specifically trying to incorporate what will be the best grain.
-
-
- 18 replies
- 3.2k views
-
-
Hello all, I am a new user and I have a question relating to an old chest of drawers. There is a drawer missing and I would like to try to have a new one made, but I have no idea what type of wood this could be. As background, I believe the chest is an American Hepplewhite c.1790 - 1810. The first picture with the hardware is the top drawer, and the second picture is the same wood, but is used to form the back of the bottom drawer. Any help would be appreciated.
-
-
- 25 replies
- 6.2k views
- 1 follower
-
-
-
My new 200X microscope. In normal use it's configured exactly as you would expect with a microscope but because that doesn't suit wood samples, I built a little holder so that it can be easily used with wood samples. #1 is a section of my own highest-magnification pic (from my camera) of a piece of "Amazon rosewood" (species unknown). It is 1cm wide and shown full size, which is about 12X Note that you can just barely make out some rays and although you can clearly see the general shape of the pore areas and parenchyma, you can't see any detail really. #2 is a 1cm wide pic of the same piece through my new microscope, shown at 10% (full size is 40X) …
-
-
- 11 replies
- 2.9k views
- 1 follower
-
-
Boy, this winter has really been terrible for me to get out into the field/woods for milling with my chainsaw. Fortunately the bandsaw mill I hired in Dec gave me a good stash for this year, but I still have about 8 smaller logs I need milled and the chainsaw mill will be employed for these. I was able to get out last month for a few cherry logs, but it's been tough. Seems this year in the Mid-Atlantic region the cold weather and frozen ground hits in the middle of the week when I'm at work, and the rain comes on the weekends. So is the plight of someone who is not yet retired. I did get out the other day to mill up 2 smaller cherry logs, both logs are little over 5 …
-
-
- 3 replies
- 2.9k views
-
-
I have been building sheds for a number of years as well as many renovations at home, but a novice a woodworking. I am acquiring tools a bit at a time and also picking up deals I find on Craigslist, such as the 24 sheets of random plywood (some 1/2", 3/8", 3/4", some are MDF and OSB, but most good plywood, many are S2S) for $200. Well, a few weeks ago a friend called me doing a renovation to the Attorney general's office and had this wood for me. All of these boards are 9.5" wide and lengths ranged from 4' to 14' and all are 1.5" thick. I think it is Red Oak but not certain and am wanting to learn to joint wood to retread my stairs with some of it.
-
-
- 36 replies
- 8.2k views
- 2 followers
-
-
In the 18 months since my last update I've made a couple of hundred corrections / updates / additions www.hobbithouseinc.com/wood_name_database/
-
-
- 9 replies
- 2.6k views
- 1 follower
-
-
I have 460bf of 8/4 Honduras mahogany ranging from 6”-16” the 6-9” $20bf 9-11”$25bf 11-16” $30 bf i’m in sacramento ca you can emil me gfmoto@yahoo.com i will ship crating+location=price its heavy so shipping will be expensive with Mahogany no longer being exported from South America this maybe one of the last times we able to find this product and the sizes
-
- 5 replies
- 2.9k views
-
-
Hi would like the expertise of anyone on this forum with helping identify what type of wood this table is and what would be the best way to care for and clean
-
-
- 14 replies
- 2.9k views
-
-
No, not the golden delicious breakfast cereal we all loved as children. This is the wreckage of a large (7" wide, 120" long) stick of flat sawn red oak. It looked perfect on the outside and I needed it to finish out as 1.5" x 1.5" spindles for a balustrade. I waaay overestimated and came home with what should have been more than enough for the job, figuring that any leftover certainly wouldn't go to waste. And then it passes through the band saw with long stretches where it feels like the saw is cutting very easily...far easier than it should. What gives? Sure enough, the entire interior of the board was a honeycombed wasteland of vast, gaping splits, som…
-
-
- 14 replies
- 4.3k views
-
-
Good morning, I’d like to make my wife a cutting board for Valentine’s Day. My wood selection is limited to Home Depot. I’d like to make something Two toned. I know I should use hard woods, but I don’t know how to finish it. What to use to seal or safe stains to use, etc. Thanks in advance! Sent from my iPhone using Tapatalk
-
-
- 7 replies
- 2.8k views
- 1 follower
-
-
I have a kiln-dried oak slab sitting at 11 feet long, 4 feet wide (at it's widest point) and an original thickness of 2 3/4". I built the popular router sled flattening system, and it worked like a dream. I had it dead flat on Friday all across the top. It is now the following Thursday, and there is just over a quarter inch of cup in the middle of the board. This slab was kiln dried, sat in the customers barn (out of the elements, but not temp controlled) for 4 months, then in my temperature controlled shop for a month before I started flattening it. The other thing that is confusing to me, is that when I started working on the slab, the side opposite the one I am wor…
-
-
- 21 replies
- 4.8k views
-
-
So I know brazilwood/pernambuco is mainly used for making orchestral bows, but has anyone worked with it in other contexts? If you have, what attracted you to this wood over others? Also, does anyone have an opinion on the issues surrounding the deforestation of this endangered species? Thanks a bunch!
-
-
- 2 replies
- 2.5k views
- 1 follower
-
-
Questions first, details second: Is 8-10% and 12-15% MC SYP dry enough to use for a workbench in a non-insulated garage shop in Austin, Texas? Given that the MC ranges across a board, which figure should I use? Max? Average? What about small wetter spots? My cheap moisture meter states "Measurement accuracy: ±4% for both hardwood and softwood". Does that mean a reading of 10% could actually be 6% or 14%? Does that make it almost useless for determining if wood is dry enough for woodworking? I started building a Roubo-inspired workbench during my vacation which has 1 week remaining (back to work on 1/14). I was really hoping to have it done by then. T…
-
-
- 13 replies
- 5.1k views
-
-
https://www.ebay.com/itm/Kiln-Dried-Spalted-Wormy-Maple-Live-Edge-Wood-Slab-Plank-Extremely-Rustic-DIY/283296091690?hash=item41f5c34e2a:g:hiUAAOSwLgpcDIDC Bit far gone, innit? I mean it's cool, don't get me wrong. If I could get it for free I'd take it as a challenge to see if enough epoxy and black magic could reanimate it.
-
-
- 10 replies
- 3.3k views
-
-
Anyone with experience with basswood for turning ? I know it is commonly use for carving, how well does it turn ? It will be for pieces that will be painted.
-
- 2 replies
- 2.5k views
- 1 follower
-
-
Tis the season for me to start cutting wood, both for the woodstove (next year's stash) and for my woodworking habit. I am very fortunate to have access to some very nice trees. This black walnut was on my property, it's the tree in the center of the photo with a nice branchless trunk. This should give me some primo logs. I saw it the first time I looked at the property in 1998 with a realtor. I harvested one very similar to this 2 years ago and it's time to for this one to be repurposed; Dropped it with no problem, as this is always something that you do with the upmost care. Spanky, take note that I dropped it just right so i didn't break the wood at the …
-
-
- 71 replies
- 14.6k views
-
-
We recently rented a house that had this exact table but as a dining table so I’m assuming it’s a semi mass produced line but figured I would have more luck with my search if I knew what kind of wood it is. Anybody know? Thanks for any advice!
-
-
- 5 replies
- 2.9k views
- 1 follower
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·