The Wood
Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.
1,451 topics in this forum
-
I'm making a few mallets out of some scrap I have laying around. I have piece of walnut that would be perfect for the handle. It looks like it either had a loose knot that fell out or some rot, or maybe both. I was wondering if I fill the large void with west system epoxy, will it be strong enough to hold up to the abuse a mallet will encounter. Photos of the wood attatched.
-
- 4 replies
- 3.2k views
-
-
Thiese pics are of a box of slats from and old metal framed glider chair. The owner would like me to amke new slats. Easy enough. At first I thought it was cedar since it has been ouside for years and has not rotted but then, just a few minutes ago I decide to look past the gray weathered wood and now I don't know what it is. The wood seems to be harder tha cedar but is fairly light in weight. Please help. Here are pics......
-
- 7 replies
- 2.8k views
- 1 follower
-
-
A freind of my wifes has asked me to duplicate a bunch of slates and armrests from a glider chair that she has had for years and really likes. Just a trace and cut job . The slats will be bolted to the metal frame of the chair. I had assmed that it was probably cedar since it has been outside for many years had not rotted. However I just exposed the grain on one piece with the jointer and table saw and I don't know what it is. I seems fairlyl light in weight but it is not very soft. The box of parts One jointed piece and one "as is" piece..... One end grain shot after cutting end off. and one edge pic Any ideas?????
-
- 1 reply
- 2.4k views
- 1 follower
-
-
Now that i have a pickup again i punched in a search for lumber and found this. https://minneapolis.craigslist.org/hnp/mat/d/american-cherry-lumber/6688938977.html For some reason the post seems a bit sketchy is this a fair price for random cherry? I don't really want to buy 1500 BF but i could and i'd be set for a LONG time.
-
-
- 9 replies
- 3.4k views
- 1 follower
-
-
Wondering if someone could help ID this wood I have. I picked up the logs I cut this board from curbside in Brooklyn NY, which means it could be anything since NYC plants many native and non native species along its streets. It feels like a medium density/weight hardwood - definitely heavier than Pine/fir but lighter than Oak/Ash, can very slightly score it with my fingernail. The bark is very much well attached to wood. Grain of the wood is very smooth and fine. Any help would be appreciated!
-
- 12 replies
- 3.7k views
-
-
I acquired some cut-offs from a cabinet shop, mixed lot of wood. i grabbed what i thought was Mahogany today and made a recipe box for a friend. i gave it the sniff test and thought well thats what Mahogany smells like then i thought it smells like Spanish Cedar !. Its fairly dense, about the same color as Spanish Cedar but with no tell-tale resin or pitch pockets like SC has, none at all. can anyone tell me do i have some type of Mahogany or is there a SC that doesn't have the resin pockets? i have a couple of other boards that i think are Mahogany but they are lighter in weight. thanks guys, this poor soul from Iowa hasn't worked with Mahogany before.
-
-
- 18 replies
- 6k views
- 1 follower
-
-
Is pecan lumber a good choice for a roubo style workbench? I have a local source that is very inexpensive!
-
-
- 10 replies
- 3.8k views
-
-
At a reasonable price I found 200' of some very nice cherry. It appears to be from the same log. Just one board of 8/4 the rest 4/4. the narrow pieces are 7". All heart. and half of it is very wide boards up to 17". Mostly long pieces 12 to 16'. The owner of the wood has been dead for 30 years and nobody knows how long he had it. He was a woodworker. It was found how he left it. Perfectly stored flat and dry. I had no room to store it. A friend offered me space in his warehouse but it was too small. Then I asked cabinet makers supply. Nice people. No charge for the storage and Steve the owner helped me with his truck. I aim covering a night out for Steve and Ro…
-
- 6 replies
- 2.7k views
-
-
Can anyone suggest the species of the gray-ish strips of wood here? One, for example, is the fifth from the close end of the piece, between the cherry and the black walnut strips. Most of the wood I have was collected here and there by my dad over the years, and most is unlabeled, so I don't know what something is unless I specifically recognize it as a species I know. This stuff is mostly gray - somewhat unusual in comparison with other woods I've seen - with perhaps a touch of green. (It's completely dry, so isn't green because it's fresh. It's probably been sitting around for 40 years.) It smells rather sweet. Not ultra-sweet; maybe a tad musty, but mostly sweet. …
-
- 4 replies
- 2.8k views
-
-
I picked up a piece of hard maple at WoodWerks the other day. Sat in the garage a couple of days before getting to it this evening. The change in humidity had added a bit of a bow at one point but not so much I couldn't work with it. Before I took it home they offered to straighten one edge for me. They've got this neat saw with a laser guide and guide lugs at feed end. Just align the board to the laser and feed it in.along the lugs and it cuts a nice straight edge. No futzing with a fence or jointer. So I take this board and attempt to cut 2 inches off that straight side. And what happens? The piece I cut off ends up with a bow in it! Tale saw heel adjustm…
-
-
- 23 replies
- 4.5k views
-
-
I am planning to tease a 42” x 6.5” piece of 8/4 Sapele into three pieces and then run them through the planet to make them equally thick and smooth at about 1/2” or a touch more. This will be for a Bluetooth speaker setup. In doing this should the wood be stickered and rested for a bit after resawing before running through the planer? Pic of the wood below.
-
-
- 13 replies
- 4.3k views
-
-
I finally have a wood stash worthy of the name. Went out to Sycamore IL on Monday and scored two beautiful 16/4 boards: 8" by 8 ft butternut and 7" by 4 ft clear Honduran Mahogany. My friend recently gave me these other boards which were leftovers from building a log home. I am not sure, but I am guessing pine, don't feel heavy enough for oak, etc. They are 14/4 by 7 1/2" by 3 1/2 ft. And then there's all the store bought blocks and other found bits I've acquired. Quite a few nice pieces including a 10 x 10 block or Peruvian walnut.
-
-
- 6 replies
- 2.8k views
-
-
OK, I think we can officially declare me totally nuts or at best a monomaniac with OCD. I've now gotten to 50,000 unique pics of woods on the wood ID site. About half these are ones I took and the rest lifted off of the Internet. This doesn't even count the 1000+ complex images and graphics I did for the glossary and the 4,000 pics I took for the anatomy pages or any of the ones done for the various articles on the site. http://www.hobbithouseinc.com/personal/woodpics/
-
-
- 2 replies
- 2.7k views
- 1 follower
-
-
Friend of mine would like me to build some items for his soon-to-be screened porch. Under roof and no direct sun, but outdoor humidity. His biggest concern is carpenter bees. I know they love WRC, since my house is covered in it and is now full of bee tunnels. Anyone have suggestions for a decent looking species for outdoor us, that the bees don't care for? Helps if it is common to the southeastern US. Cypress, juniper / cedar, and white oak are the most common "rot resistant" species here, but something else would be better for bees?
-
-
- 17 replies
- 5.1k views
-
-
My dad was a professional woodworker for many years and recently passed away. While he taught me a bit when I was young he didn't teach me everything he knew! I did a few things in high school and college but have not done anything in decades. A few months ago I got back into woodworking and found a lot of elm burl veneer from 1960 in his workshop. I know its 1960 because for some reason the veneer was backed with newspapers! As you can imagine, even though the veneer was in a box to keep it flat, it was very dry and very warped. I bought some veneer softener and kept it pressed for several weeks. The result was flexible, soft, and flat veneer. That wa…
-
-
- 7 replies
- 4k views
-
-
I want to make a violin back of tiger-striped walnut (the finer and deeper. the better). does anyone have or know where I can find some?
-
-
- 10 replies
- 3.7k views
- 1 follower
-
-
Craigslist find. A reclaimed wood millwork shop was advertising a mystery wood they called Acacia. They said they sent a sample to a lab many years ago and it came back as a member of the acacia family from Hawaii. The boards were each 8 ft long, 20" wide by 8/4 thick for $20 a piece. I picked up 7 of them. Planed down, they look like paduak, but with a less discernible grain structure. All-in-all a decent looking wood. So I was happy with my score. Here's where it gets better though... While I was picking those wide boards up, the guy showed me another stack of narrower, 8" wide boards that he thought were the same thing. They had more of a grain structure than the …
-
- 6 replies
- 3k views
- 1 follower
-
-
I recently made a cabinet using 3/4" furniture grade walnut veneered plywood. I bought the plywood pre-finished from a local plywood distributor. The cabinet is mounted in a corner of an office and holds a computer router, wifi box, and things like that. The door to the cabinet is 18" x 58" and is mounted with a piano hinge on the left side. The issue is that the bottom right corner of the door has warped out, away from cabinet, about 3/4" - 1". The door is solid plywood with pvc trim covering the edges. Why would the plywood bend like this? And more importantly, how can I fix it? This cabinet isn't in direct sunlight, close to a heater or anything like that. The co…
-
-
- 6 replies
- 3.6k views
-
-
Dating a structure by taking core samples from timbers that have some of the bark edge left from the tree they were hewed out of, and comparing the ring sizes to others in the database of known dates. Today, Mick Worthington came to an old house I've worked on, on and off, over the past 7 years. The told history never made a lot of sense to me, and as I got into working on the house, there were things about it that made it look a lot older, to me, than the told history. The only way to prove when the house was built was by Dendrochronology. There are several possibilities for interesting, and important history, for the most likely dates that this house was built. …
-
-
- 8 replies
- 2.9k views
-
-
I have some Bolivian Rosewood and several of the pieces have a dark staining on them that almost looks like water spots. This piece is by far the worst most of them were no bigger than a pencil eraser. I've already planed at least 1/8" off and it looks like it goes down at least another 1/8". Just wondering if this is a natural discoloration in the wood or if something else has caused it. There was no checking on the face of the board but the stain does seem to follow the grain. I thought maybe sticker staining but it doesn't run in the right direction. And of course the million dollar question, can I do anything to remove it?
-
-
- 5 replies
- 5k views
- 1 follower
-
-
I follow a guy on Facebook, J. Kenji López-Alt, the Serious Eats/Food Lab guy. https://www.facebook.com/kenjilopezalt/ Food is his thing, but he's also a decent woodworker. He posted a photo of an outdoor table & benches that he made out of redwood that is just stunning. Even if you don't care for live edge stuff, you might like this.
-
-
- 25 replies
- 6.1k views
-
-
I'm fairly new to woodworking, other than some plywood projects and 2x4 construction projects over the years (if you can call those woodworking). I just bought a bunch of lumber from a lumber yard in the area and I am starting to worry myself about storing it. I don't often have access to a truck so I bought more than enough for the few projects I have immediately planned. It will be stored in an unconditioned garage (except for a small heater or fan when I am currently working in the garage). I live in an area with average humidity of about 65-75% and average temperatures ranging from 50-90 (highs). The lumber is kiln dried and a mix of species but mostly poplar, ch…
-
-
- 10 replies
- 5.2k views
- 1 follower
-
-
I've been using more thin kurf tablesaw blades recently. The problem that I'm having is that the Riving knife on my Grizzly 1023 is thicker than the saw blades, causing some of my rip cuts to stop mid-cut. Does anyone else have this problem ? Does anyone have any solutions?
-
-
- 7 replies
- 5k views
-
-
Anyone have any experience working with Mushroom Wood? I picked some up yesterday, for some doors I'm building. Great texture, but splintery. Its dry, but needs some prep, power washing, etc. any advice? thanks
-
- 2 replies
- 2.8k views
-
-
I was thinking of making a wall unit like this one. To make the top I was thinking about making it out of 2, 2 x 6 boards, by cutting off the rounded edges joining them together with dowels or biscuit joiners. Would this create issues in the future with wood movement? Also any tips on how to fix any warped boards would be appreciated. This wall unit is being shipped to a warmer climate in Jamaica. Thanks for your help its appreciated
-
-
- 5 replies
- 2.9k views
-
Who's Online (See full list)
Forum Statistics
- Total Topics 32.1k
- Total Posts 437.6k
Member Statistics
- 26,011 Total Members
- 3,644 Most Online
-
bobtjanitor Newest Member ·