Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by craig12861,

    Found this old wood in barn,any ideas? The darker table was stained with red oak minwax. White when ran through planer. It is real hard and heavy.

  2. Started by Jonathan McCully,

    Going out tomorrow to get a large load of walnut cut fresh from the tree. Until now I’ve always bought my lumber kiln dried, so this will be my first experience with non-dried wood. I understand that it will need to dry for quite awhile before use, but how should I store it until then? Do I sticker it and stack? And do I then need to buy a device to measure the moisture content so that I know when it’s ready to use? Just looking for some tips. Thanks.

      • Like
    • 18 replies
    • 4.9k views
  3. Started by danbell78,

    anyone have experience using Locust, what's it good for? How about drying it (air dry), any concerns? I have a neighbor that I might be able to get a log or two from to add to my growing pile to get cut up soon. Thanks

  4. Started by Hammer5573,

    I’m seeing a lot of cheery like this in the lot that I was given Can anyone tell what kind this is? Are the black lines “fruit lines”?

  5. Started by man of wood,

    Please help me out..... what kind of wood do you think this is?? Thanks

  6. Started by Bmac,

    I contacted a friend of mine who seems to know everyone in Delaware to see if I could score some oak for firewood. He knew a farm owner that had a tree that needed to be cleared, so off we went to harvest some Red Oak. When we got there we saw a gorgeous White Oak down about 150 yards into the woods. My friend had the right equipment to at least try to harvest this great looking tree. After we cleaned up the Red Oak and split the haul with the land owner, myself and my friend we went to work on the White Oak. The owner said if you can get it out you can have it as it will just rot anyway. We used a Bobcat and it got stuck multiple times as it was wet and swampy where the …

      • Like
      • Haha
    • 26 replies
    • 6.1k views
  7. Started by Art,

    I came across a good stash of nice walnut recently. I had accompanied a friend of mine to a local yard that specializes in reclaimed fir (beams, joists, etc). He makes most of his stuff from this type of fir, and I just went along to check out the yard. While I was there I started poking around the stacks, and came across a pallet of 8/4 walnut. This was about the only hardwood they had in the place. I asked about it, and apparently these were old floor boards from an old barn in northern Tennessee. I'm not sure why these guys bought it because they don't really deal in this stuff at all. Anyway, the were asking $9/bd ft. Around here, 8/4 walnut typically goes for…

      • Haha
    • 6 replies
    • 2.7k views
  8. Started by Minnesota Steve,

    While going through my father's stuff I came across this wall hanging barometer plaque he'd received as a gift from his work. My wife asked me what wood it was, and looking at it I said I thought it was walnut. But it was a very light golden brown, so she wasn't convinced. I happened to pop one of the meters out of the top, and you could see where the walnut was protected from the light.... This plaque is a good 30 years old, and it hung on the wall most of those years.

    • 1 reply
    • 2.5k views
  9. Have three 200+ year old oaks recently die on my property (3ft+ dia) ... who might be interested in the logs ? I would hate to just burn them ... state of Michigan suggested portable mills but I don’t know where to start and am looking for suggestions...

      • Like
    • 10 replies
    • 3.3k views
  10. Started by Eddie Wilson,

    I purchased some air-dried lumber from a local lumber guy, walnut slabs. I noticed that the sapwood on the edge (1 or so inches thick) was dry rotted. I can break off a bit by hand, with some force. I planed a bit of the heartwood and it looks great. In contrast, I've purchased kiln dried lumber from another local guy, and the sapwood seems to be just as strong as the heartwood. I see people incorporating walnut sapwood into their projects with beautiful results. Should I be concerned about dry rotted sapwood? Is this the difference between air-dried and kiln-dried? How safe is it to incorporate walnut sapwood into your projects?

      • Like
    • 7 replies
    • 3.2k views
  11. Started by Matt Truiano,

    I built my son a bassinet out of cherry and he out grew it a few months ago. I've been hesitant about storing it in my attic for fear of it getting ruined by the drastic temperature changes and if there are any mice up there i worry they might scratch it up. Am i over thinking it? are there other things i should be concerned about with the attic? i don't think it gets humid up there. By the way I live in NY so in the summer the attic gets about 110+ and in the winter it gets in the 30s/40s

  12. Started by Damian Sexton,

    I may have a bunch of Brazilian rosewood in large cants up to 12x12x 20ft. I have no idea what it's worth is and/or how to tell for sure what it is but it's very old and was left at an old lumberyard where it sat with stuff growing on it for 10-30 years. Also have large cants of lignam vitae. Does anyone know what a bd ft would go for in say 6x6 x11ft long in the br.rosewood? And the lignam vitae. Also anyone in the williamstown area that would like to come help identify it I would appreciate the help and reward with some wood.

  13. Started by techbiker,

    Thank you for all of your help with my floor wood ID request topic. I have been working to re-seat the tongue and groove soffit boards that are falling out on my 1913 bungalow in the Denison, TX area. One board had been hanging out at an angle for so long it developed a severe warp. I decided it made sense to pull the board to determine a course of action. Not sure I can cure the warp completely so I am looking at replacement options. Please see attached pictures of the back side of this T+G board. The lighter area was covered while the darker area was exposed to the interior of my attic for 105 years. The board appears to me to be a good grade of pine but is this sa…

      • Like
    • 3 replies
    • 2.6k views
  14. Started by MHRestorations,

    I have a 16" wide walnut board with a lot of cupping. Sending this through the planer is not an option. Wondering if ripping it down the middle, joining the edges and glueing up as a panel would be an option? This is for a shelf, and unfortunately it came out of the kiln like this when I picked it up from my supplier.

    • 4 replies
    • 2.8k views
  15. Started by techbiker,

    Hello all, I recently purchased a small bungalow that was built in 1913. Sadly, most of the interior was gutted and replaced in 2009. On the bright side, the majority of the original wood floors appear to be intact and in reasonable shape. Given there are no exposed nail heads, I am guessing the boards are tongue and groove like my porch. Like my porch boards, the faces of the interior floor boards measure 3-1/4" wide. What are your thoughts on species and cut given the grain pattern? If this wood is pine, is it heart pine or soft pine? Please see attached pictures. If I can identify the characteristics, I will be able to replace the few damaged boards with proper pi…

      • Thanks
      • Like
    • 10 replies
    • 2.9k views
  16. Started by curlyoak,

    When I slice open a board of fas kiln dried hardwood, likely it was milled 1 or 2 years ago. The board has memory and can revert back to memory when ripped. Grain tensions cause that too. I recently got lucky and found a stash of 200' of beautiful 1 inch cherry. Up to 16' and up to 17" wide. Hardly any sap with almost no defects. Far above fas for cherry. Also this wood was put into perfect storage in terms of flat and dry. The owner died and 25 years later I got it. No one knows how long the man had it in storage before he died. So my question is can some of the memory from being a tree be lost and some or all of the memory becomes the experience of decades in…

      • Haha
    • 5 replies
    • 3.2k views
  17. Started by Daniel Simpson,

    I love the wood house stay or sleeping with comfortable. What your? Share your own experience...

    • 2 replies
    • 2.5k views
  18. Started by danbell78,

    Thanks to the lovely emerald ash borer I am getting myself into a few ash logs to get milled up for lumber. (don't worry the trees are in my neighborhood already, will be milled on sight and dried in my shed so I am not spreading the bugs around). Question is for anyone with experience drying ash, air drying that is. How does it act around knots and crotches? The first two logs I have access to have pretty short stretches before hitting branches and wondering if it is worth milling that material up or not. Current thought is to make wainscoting or similar out of these for my basement so short boards is OK.

      • Thanks
      • Like
    • 18 replies
    • 4.5k views
  19. Started by Art,

    So I've always wanted to try some milling, but living in the middle of a big city, the opportunities don't really present themselves a lot. However, the city of Vancouver maintains thousands of trees along city roads, and they occasionally them down if they are sick or otherwise dying. In these situations, the logs are left on the side of the road, and anyone can help themselves to them. Recently, I came across some reasonably sized logs: some Alder and some Red Oak. I realize they are not the most desirable species around, but for me it was more about the learning experience. Anyway, my wife and I went out and hauled them into the back of my truck, and today I went …

      • Haha
      • Like
      • Thanks
    • 43 replies
    • 7.9k views
  20. Started by Dapettit6,

    At my job in the oilfield I pick up these wood beams that pipeliners use when setting pipe in the ground. Most of them are oak but sometimes I come across some mystery trees. I live and work out in the desert of West Texas and New Mexico so I doubt its a native tree since we have no trees out here. Any idea what kind of wood this is? I ran it through the planer and splashed some mineral spirits on it to reveal the grain.

      • Like
      • Thanks
    • 10 replies
    • 3.2k views
  21. Started by Goober,

    Hi folks, I`m looking for a source for kiln dried hardwood. I`m located in Murfreesboro Tenn. Spanky where are ya located? Is there another way to contact posters on this forum without bothering everybody?

      • Like
    • 6 replies
    • 2.4k views
  22. Started by Bmac,

    Have any of you guys had paulownia milled? I've got some trees on my property I plane to harvest this fall. I've heard it's easy to dry, dries fast, decay/pest resistance, and stable. Wasn't sure if there were any issues I need to look out for when processing the wood. I plan to make a surfboard and a paddleboard out of the lumber, supposed to be the perfect wood for these projects.

      • Thanks
    • 6 replies
    • 3.2k views
  23. Started by Ronn W,

    Angel Oak is a Southern live oak (Quercus virginiana) located in Angel Oak Park on Johns Island near Charleston, South Carolina. The tree is estimated to be 400-500 years old.[1] It stands 66.5 ft (20 m) tall, measures 28 ft (8.5 m) in circumference, and produces shade that covers 17,200 square feet (1,600 m2). Its longest branch distance is 187 ft[2] in length. Angel Oak was the 210th tree to be registered with the Live Oak Society. Absolutely Beautiful. jUst thgouth I would share it.

  24. I live in Western KS aand there is no good wood source. I can drive to Denver in 3hrs looking for best source of hardwood (reasonable) without driving all over CO finding it.

  25. Started by Chestnut,

    @treeslayer Sorry, well not sorry. I liked the idea of before and after pictures of some of the stuff we've made so i took your idea and started the thread. Hope you can forgive me for being hasty. As soon as I saw this idea i wanted to run with it because i thought it would be intersting. I devote this thread to the idea given to me for people to share pictures of stuff they have made when it's freshly finished and a year or 20 after it's been used and has had some good time to change color. First piece is a one of a pair of booksehfl speakers i made. The woods are Maple Jatoba and walnut. Love the aged look of the Jatoba the red brown is very …

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.