Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

The Wood

Choose the right lumber for your project. Compare wood species, grades, and plywood, and get advice on moisture content, acclimation, and wood movement.

  1. Started by Ronn W,

    I kinda like this wood and it is cheap but I never here anyone else mention it. Does anyone else use it or like? Or am I just strange? (rhetorical) Attached is hackberry panels in cherry.

  2. Started by Pwk5017,

    Thinking about starting this project soon, but i want help on what to use where. Im not in love with Marc's combo on the outside of the box. Namely, i usually dislike a mixed species frame and panel. I like the interior of the case contrasting with the drawerfronts, and think i will maintain that. For the two swing out doors and drawer fronts, i plan to use walnut like marc. I have some thick walnut crotch blanks that i can do the drawerfronts and/or door panels. i plan to keep the frame, lid, and base pretty basic grain/figure. I have one board of bubinga left over that could be used as a secondary species. I might use the bubinga for the interior case sides, drawer pull…

      • Like
    • 8 replies
    • 3.2k views
  3. Started by drzaius,

    Ever since I got hooked on the Tips From a Shipwright YouTube channel, I've done some poking around on other boat building channels & have been watching this one as well. In that episode he's cutting a scarf joint to join 2 massive timbers to form the keel. This wood is purple heart. I don't really like the stuff myself, but I guess it must make a good keel.

      • Haha
      • Like
    • 15 replies
    • 4.1k views
  4. Never bring a xylophile into a department store. Found this head scratcher of a trivet on the discount rack in Macy's last week in Philly. No, I didn't feel the need to buy it.

      • Like
      • Haha
      • Sad
    • 10 replies
    • 3k views
  5. Started by MisterDrow,

    So a friend of mine runs a timber framing business and has his own bandsaw mill. He also gets trees from around the area that get cut down and mills slabs and lumber from them to sell on a regular basis. The stuff I get from him usually isn't all the way dry so I have to let it sit for a few months or more before I can use them but his prices are amazing so I don't mind. Well, I managed to get this slab of maple from him that he had sitting on a rack in his shop for almost 2 years for $35. It's 60"x20"x2". At $2.09/bdft, that's less than half of what I can get maple at the lumber yard so I happily scooped it up. This will be the first time I'll be mi…

      • Thanks
      • Like
      • Haha
    • 15 replies
    • 3.6k views
  6. Started by Dementedpenguin,

    I am building a combination coffee table, standing desk, and gaming table with my dad. We are in the process of selecting wood for the table top, which will be 36x80". The bottom is a Jarvis standing desk frame. Do you have any suggestions for specific woods or resources where I can learn about different types of wood? I'm looking for something durable that will be a darker color when finished/stained. Price is not too much of a concern.

  7. Started by curlyoak,

    This was made to hide a problem. A friend got an outrageous deal on discontinued showroom cabinets for his home bar. It was as if it was designed for the space. One exception, there was a small sink in the marble top that could never be plumbed due to location. Entertaining, guests would pour left over drinks that would drain in the cabinet. They wanted to keep the sink for ice and champaign with a bucket below for the ice melt. But the rest of the time they did not want more mess below. It fits on the top nicely. I added to the bottom a piece of wood that fit in the sink hole. That is why there is a hand cutout on the left of the picture so it could be lifted out near th…

      • Like
    • 7 replies
    • 2.7k views
  8. Started by SCPDX,

    A buddy said he has seen me at the shop - asked me what I was working on. I said nothing. Just milling up wood for the heck of it and not really sure what to make. Then it hit me that maybe I should just be in the sawmill business as I like finding scraps and seeing what they might be. (Maybe there is some Oprah type story about looking beyond the rough exterior?) Anyway - now I have a stack of this. About 10" wide 3' to 4' long.

      • Haha
    • 4 replies
    • 2.9k views
  9. Started by Coyote Jim,

    I got my hands on some rough lumber that I do not know what it is. Here is what I know about it. I have a lot of it. It's WAY harder than pine, almost as hard as oak (maybe equal too?). It is just about 5/4 thick. Most of the boards are 6' wide and a few are about 9" wide. The boards are very heavy. I found them by a dumpster as crates. According to a packing slip on the crates they were used to ship hard maple blanks. The blanks in the crates are being used by a local company that makes baseball bats. If I think of anything else I will post it. I did a quick planing to reveal the grain. By accident I grabbed t…

  10. Started by pahoulihan,

    I’m building a crib for my first born son and am very close to being done. I can’t find 2x or 4x pine ANYWHERE. Any suggestions or options you’d suggest? I need the 2x to support the frame of the mattress and the 4x for the four corner posts. any help would be appreciated, thank you

      • Like
    • 7 replies
    • 3.4k views
  11. Started by Patty cakes,

    Does wood have to be a 10% or whatever the perfect number is for furniture. chairs mostly is on my mind. Have a template n a router for the back legs. Even if i dident use a router when u start to join everything together will it bend n twist extremely if its not on the perfect number n what can i get away with. thanks again

    • 6 replies
    • 2.7k views
  12. Started by difalkner,

    A friend who lives a couple of hours from us sent an email Wednesday asking if I wanted his Walnut, Maple, and Mahogany scraps for cutting boards. He builds very nice custom furniture and guitars, about 55 so far. Anyway, he said if I didn't want the scraps they would go in his burn pile. I haven't seen him in 6 months or so and wouldn't mind the drive but since I had a ton to do yesterday I asked if he could give me an idea of the amount of scraps he was talking about. He sent some photos and said most were 4/4 36" or so but would be great for what I'm doing. We figured, why not, our stuff will wait and Sandy and I would enjoy the drive. These are the photos he sent a…

  13. Started by Ronn W,

    I spent what seemed to be a extraordinary amount of money on some A1, Oak both sides, 1/4" thick, MDF core plywood for a project I am making for a friend (framed panels.) I had to cut the sheet in half to get it home so there were no returns. I cut a test dado with my 1/4" router bit to check the fit and discovered that is was very loose. The dado mic'd at 1/4" the plywood mic'd at 7/32". I had previously been told by an emplyee of Youngblood Lumber that their MDF core was a full 1/4". When I called them up to tell them what happened the guy on the phone was surprised and repeated that it should be a full 1/4" and he told me what the tolerances were. 7/32" is outs…

  14. Started by danbell78,

    I have recently had the good luck of getting my hands on some maple lumber. Seems my brother-in-law has upped his game on his side job of cutting down trees and got into milling up some of these trees. So I got this maple at what it cost him to have it milled. It is currently drying in the basement, dry basement with a fan blowing on them. With these being about 5/4 or a bit more in thickness what should I expect for drying time? I plan to make a bunk bed out of these for my daughters, and they are quickly outgrowing their current beds He has also picked up a chainsaw mill and started making some slabs. He will be selling these off, so as those come available i…

      • Like
    • 16 replies
    • 3.8k views
  15. Started by Mark J,

    I guess I'm going to need a moisture meter. Do you folks have any specfic suggestions as to brand and model? Did a quick search of the forum and I'm not seeing any specfic recommendations. As to pin or pinless I'm not hearing a compelling arguement in favor of pinless.

      • Haha
      • Like
      • Thanks
    • 34 replies
    • 7.2k views
  16. Started by Chris Spann,

    im starting a cherry bookcase for my son and I’m having a heck of a time getting some of my boards straight. I’m at 3/4 now which is where I wanted to be but I’ve got a couple that still need some work. My bar napkin plans are 4’ high x 30” wide x 10” deep. What do you think? I was hoping to get away with no face frame. Thanks and Merry Christmas.

  17. Started by Andrew,

    So, just curious. For particle board cabinets one of the main issues in water seeping up and ruining the board on the floor. Would it improve durability if you sealed it with the same stuff you seal lumber with after cutting it at the mill or just using latex paint? Would this do the same thing and act as water and cause it to swell?

      • Thanks
      • Like
    • 6 replies
    • 2.8k views
  18. Started by Robert Morse,

    As part of the build for my shop, I had a large maple tree removed. Yesterday, I had that log milled up, and I thought I'd share some pictures and the experience. This ended up being a bit of a rush due to the timing of the shop build. My original plan was to have the log milled right on the flat area where the shop is going. The guy who felled the tree and did our site prep left the log against a fence at the back of the build area. But the contractor doing the build was able to start early, and I needed to move the log away from the build site, or I would not have been able to get it out once they started building. So we rented an excavator on Sunday. I cut th…

  19. Started by kyokahn,

    So I recently got a 4 large pieces (2½" x 14" x 7' down to 2½ x 12" x 3') of old growth Cocobolo and Cristobal (granadillo). These are rare even here. They were VERY rough, to the point where I think they were cut with a chainsaw and left to dry for a long time. The Cocobolo looked grayish orange and I even had to use the beat up block plane to sort of identify it... Anyway, having small tools and a few jigs to work with, I was able to mill the smallest piece of Cocobolo and when I planed it, it showed some interesting patterns. It looks shiny depending on the angle just like curly figure but it's more pronounced and ... spiky?, so what do you call this? …

      • Haha
      • Like
    • 22 replies
    • 4.2k views
  20. Started by Marmotjr,

    Color me disappointed! Picked up some Thuya Burl blanks for some pens for christmas. Absolutely gorgeous wood. But I love making a little card that gives the blank some history or backstory, even if it's just an exotic origin story. I've done Olive wood from Bethlehem Israel, Staves from a Jack Daniels Barrel, and planks from a retired boat for it's old owner. But when I did the research on thuya, I was pretty disappointed to learn it's pretty much an ornamental tree, and the recipients of the two pens actually have a couple in their yard. But I'll make something about the other variations of Thuya and embelish a bit for a good story.

  21. Started by Isaac,

    In order to alleviate stress in my neck, I raised my computer monitor up higher to be closer to my line of site. Those boards are just the cut off ends from when I replaced my basement stair treads a couple years ago (it is hard for me to throw things away). Not exactly a pretty solution, so now I want to make a box, about the same size, say roughly 12"x"12"x4". I'm envisioning it having a drawer or two on the front, so I don't waste the space and probably on some sort of small feet. I'm not quite sure hot to build it though. The monitor is not particularly heavy, but it needs to support it. Even though this is a unique need, I don't really want to re…

      • Like
    • 16 replies
    • 3.9k views
  22. Started by Pwk5017,

    I am out of touch with live edge prices, and green lumber is compounding my current issue. The slabs are 24"+/- wide and 12' long sawn at 10/4. Pretty good looking material that i am interested in. Unfortunately the guy wanted $15/bdft. I wasnt sure how much market knowledge he had, but i calmly explained $15bdft for green material is beyond insane. Even at $5, i dont know how interested i am... They have very subtle curves, and live edge or no live edge, a bookmatch could make a great table top a couple years down the road. Anyone buy or sell slabs or green walnut recently? Im buying KD FAS or Face and better 8/4 walnut locally for $7-8 a bdft. Right off the…

      • Like
    • 18 replies
    • 8.5k views
  23. I have 7 bundles (150 pieces)of this maple and not sure what to build out of it ? any suggestions would be appreciated! thanks they are 7 3/4” w 21” L And 1/4 thick

  24. Started by Marmotjr,

    About two years ago the (now ex) GF found a guy who was selling lumber cutoffs for fire wood, and she was able to procure me a bunch of them for turning blanks. Not many typical domestic hardwoods in the lot, bunch of cedar, pine, and a locust. I have one large blank left, and it was all fuzzy and yellow/orangish. I figured it for another lump of cedar or something. There were also some checks and chips in it, and I assumed they went fairly deep like most of the others she got, so it just sat there waiting for a use. So today I figure I'll give a bandsaw box a practice try in a warmup for the reindeer/sleigh bandsaw box I'm going to try. Unable to tell wh…

  25. I'd like to know what people's experience has been with PEG - polyethylene glycol, for treating wet wood and minimizing shrinking and splitting. I've found a few posts here referring to it but not much direct conversation about it. I'm especially interested in its potential application to my own ridiculous project, but I think the subject might be of general interest and this will be good place to put PEG talk. So what have you done with PEG? What are the limitations of this material? What are some good sources for buying or acquiring PEG? I've heard that it is impossible to overtreat, so it is safe to leave it in longer when you aren't sure of tr…

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.