Not to argue, but I wouldn't want to dissuade anyone with <3 HP of DC from using it. I have nothing that powerful and while what I have is far from perfect, it does a lot of good.
MDF does make a lot of dust, but it does seem to be the easiest for a good DC to take away. With a 3hp DC we could cut MDF inside houses and not a bit of dust would get on anything. That did include a well sealed old Unisaw and an overarm dust arm. I always cut a piece of MDF if anyone asked to see how well it worked.
My rule of thumb is anything less than 3hp is wishful thinking.
This morning, I routed a groove to serve as a miter slot in my freshly-built router table / saw wing.
The aluminum channel, sold as 'plywood edging' at my local home center, is perfectly sized to fit my gaige bar, and will be glued in as a 'wear liner'. MDF core makes for a flat slab, but produces the nastiest dust! Once my TS revamp is finished, dust collection for mobile machines like routers is high on my todo list...
A quick web search tells me that ballasts made before 1979 might contain PCBs and should be treated as hazmat unless they specifically state "No PCBs." Those made in 1979 or later should be fine to recycle or scrap.
FWIW, our local county recycling center takes "electronics" which would include ballasts.